Rust-Oleum Hard Hat Fluorescent Topcoats are a range of highly visible fluorescent coloured aerosol marking paints for use on railings, signs, machinery, walls, etc. in maintenance and industrial environments. Increased safety, useable internally and externaly.
Rust-Oleum Hard Hat Fluorescent Topcoats benefit from all the same qualities of Rust-Oleum Hard Hat Aerosols by going further, working quicker and lasting longer and are ideal for marking or signalling in maintenance and industrial environments.
Features & Benefits
Highly visible fluorescent coatings
Ideal for railings, signs, colour coding etc.
First apply Rust-Oleum Hard Hat 2190 Matt White for best results
Finish with Rust-Oleum 2500 Transparent Protection for better durability
To handle after 30 minutes (at 20°C)
Available in red, orange, yellow, green and blue
Technical
Gloss Level: Matt
Propellant: Dimethyl ether
Heat Resistance: 100°C (dry heat)
Theoretical Consumption
2.1 m² per spray can at 25 µm dry
Practical Consumption
Practical coverage depends on many factors such as porosity and roughness of the substrate and material losses during application.
For good results the relative humidity shall be below 85% and the temperature of the can and substrate above 0°C.
Please contact Rawlins Paints' Technical Support Team on 0113 2455450 for more information.
Product Details
220-40760
Data sheet
For Use By
Consumer Use
Interior / Exterior Use
Interior & Exterior
Water / Solvent Based
Solvent
For Use On
Railings Signs Previously Painted Metal
Application Method
Aerosol
Sheen
Matt
Pack Size
500ml
Base Type
Based on lead- and chromate free pigments.
Key Features
Highly visible fluorescent coatings. Ideal for railings, signs, colour coding etc. First apply matt white 2190 for best results. Finish with transparent topcoat for better gloss. To handle after 30 minutes (at 20°C)
Touch Dry (at 20°C)
15 Minutes
Dry to Handle (at 20°C)
30 Minutes
Dry to Recoat (at 20°C)
After 1 Hour
Fully Cured (at 20°C)
3 Days
VOC
653 g/l
Shelf Life (from date of manufacture)
3 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5° and 35°C.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
I'm looking to use the blue colour of this on the top portion of a masonry post close to road curb outside house...will this reflect car lights at night? Please advise if this is the best product. I was going to use the black from similar range for the bottom two thirds of the post. Thanks, Paul
Rust-Oleum Hard Hat Fluorescent Topcoats is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
Rust-Oleum Hard Hat 2500 Transparent Protection is a non-yellowing transparent protecting coating that can be applied over various Rust-Oleum products, old fading coatings or directly onto many surfaces to provide increased durability, exterior performance, gloss level and cleanability.
Non-yellowing (UV resistant)
Quick drying (10-15...