HMG 1K DTM 30 Colour Aerosol

    AERODTM30
    HMG5731

    HMG 1K DTM 30 Colour Aerosol is a single pack direct to metal compliant coating, giving good corrosion and early moisture resistance, ideal for application direct to metal as a single coat primer finish for use on skips, containers, agricultural and construction vehicles and machinery.

    • Low Odour
    • Improved performance at higher film weights
    • PG6/23 11 Compliant
    • Fast drying properties - touch dry after 2 hours
    • For original product please see: HMG 1K DTM 30 Colour
    • Please note: Light shades may require dust coat
    • Available in 3,500 colours from RAL, NCS, and British Standard

    Please note: Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour.

    Product customisation

    Don't forget to save your customization to be able to add to cart
    • 250 char. max
    Colour Group
    Size
    Finish
    £34.90(ex. VAT)
    £41.88 (inc. VAT)
    Quantity
    Please choose your colour
    Available for Delivery (See Delivery Options Below)

    Description

    Click To Jump To Section:


    Features & Benefits


    • 400ml/16oz Aerosol
    • Available in packs of 1 or packs of 6+, 50 and 100 with discounted price breaks
    • Recoat at any stage, ready for use
    • Suitable for most clean and degreased metal surfaces
    • Can be applied to existing coatings
    • Quick drying – touch dry after 2 hours
    • Coverage: 6m²/L
    • Flashpoint: -42°C
    • PG6/23 11 Compliant
    • Available in 3,500 colours from RAL, NCS, and British Standard

     

    Surface Preparation


    • Ensure surfaces are clean, dry and free from grease, oils, dust and other contamination prior to application
    • Read and follow the safety data sheet & product data sheet (see section above) and label instructions
    • Stir all paints thoroughly before use
    • Thoroughly clean and degrease using suitable HMG Prep Clean 2803. Abrade with P80 – P180 if necessary

     

    Aerosol Application


    • Shake can for a minimum of 2 minutes prior to use ensuring that the contents are fully mixed
    • A trial sample should be done prior to application to guarantee correct colour & sheen
    • Hold the can 10 - 20cm from surface to be sprayed, moving the can steadily in a straight line, overlapping slightly on each pass
    • When spraying is complete, invert the can and spray briefly to clear the nozzle and valve
    • If the nozzle is blocked when re-using:
    • Remove the nozzle and soak in solvent for several minutes and replace
    • Replace permanently blocked nozzles with a new nozzle and use as normal

    Precautions

    • Keep out of reach of children
    • Avoid contact with skin and eyes
    • Do not spray onto naked flame or incandescent material
    • Avoid inhalation of vapour, particles and spray mist
    • Where practicable this should be achieved by use of exhaust ventilation. If this is not sufficient to maintain particles and solvent vapour then suitable respiratory equipment must be used
    • Full aerosols are pressurised containers and should never be banged, thrown or crushed which may result in failure of the seals or cause explosion

    Fire Prevention

    • To prevent the creation of flammable concentrations of vapour in the air, good natural ventilation and, if necessary, exhaust ventilation should be provided
    • Additionally, aerosols should only be used in areas which are free of naked flames and other sources of ignition (including unprotected electrical equipment)
    • Pressurised containers should be stored away from all sources of heat to avoid the risk of explosion
    • Good housekeeping standards and the regular and safe removal of empty containers will minimise risks

    Disposal

    • Aerosols must never be punctured or incinerated, even when empty
    • Disposal must be undertaken in line with current regulations set out by local authorities

     

    Should you require any assistance, please contact Rawlins Paints' Technical Support Team on 0113 2455450 (option 2) or send a message to [email protected] for more information.

    Health & Safety


    • Refer to the safety data sheet in the attachments section above and tin label prior to use
    • Suitable respiratory equipment should be worn when spraying
    • Contaminated rags, spray booth filters or other substrates should be segregated from other chemical waste, soaked with water and disposed of in a non-combustible container with a tight fitting lid

    Product Details
    5731-893432

    Data sheet

    Manufacturer
    HMG Paints Ltd
    For Use On
    Metal
    Skips
    Metal Containers
    Agricultural Machinery
    Construction Machinery
    Application Method
    Aerosol
    Sheen
    30% Sheen
    Colour
    Fully Tintable
    Single, Two or Three Pack
    Single
    Product Certifications
    PG6/23 11 Compliant
    Pack Size
    400ml/16oz Aerosol
    Touch Dry (at 20°C)
    2 hours
    Fully Cured (at 20°C)
    7 Days
    Coverage
    6m²/L
    Density
    0.762 g/cm³ at 20°C
    Solids by Volume
    13.6%
    Shelf Life (from date of manufacture)
    12 months
    UN Number
    UN1950
    Flashpoint
    -42°C
    Colour(s)
    Fully Tintable
    Suitable For Use On
    Skips
    Suitable For Use On
    Metal
    Suitable For Use On
    Construction Machinery
    Suitable For Use On
    Metal Containers
    Suitable For Use On
    Agricultural Machinery
    Finish
    30% Sheen
    Application Method
    Aerosol
    Manufacturer
    HMG Paints LTD
    Usages
    Corrosion Resistance
    Product Usage Type
    Primer
    Product Range
    1K DTM
    Colour Family
    Yellow
    Colour Family
    Grey
    Colour Family
    White
    Colour Family
    Blue
    Colour Family
    Brown
    Colour Family
    Orange
    Colour Family
    Beige
    Colour Family
    Black
    Colour Family
    Green
    Colour Family
    Neutral
    Colour Family
    Red
    Colour Family
    Pink
    Attachments
    Download


    Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


    Be the first to ask a question about this product!


    Question about the product

    * Required fields
    (read)
    Send

    IMPORTANT SHIPPING & DELIVERY INFORMATION

    HMG 1K DTM 30 Colour Aerosol is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

    Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

    Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

    All delivery costs below are excluding VAT


    You might also like

    HMG Prep Clean 2803

    HMG Prep Clean 2803 is a slow evaporating, low odour and mild preparatory cleaning solvent for the degreasing of substrates.Used in many applications For use on bare surfaces onlyMore Information Delivery Info

    In stock

    HMG Thinner 2621

    HMG Thinner 2621 is a thinner for use in various applications.For use with compatible HMG systems.More Information Delivery Info

    Price £10.70 (ex. VAT)
    In Stock and Available for Delivery

    HMG 1K DTM 30 Colour

    HMG 1K DTM 30 Colour is a single pack direct to metal compliant coating, giving good corrosion and early moisture resistance, ideal for application direct to metal as a single coat primer finish for use on skips, containers, agricultural and construction vehicles and machinery.Low Odour Improved performance at higher film weights...

    Price £42.30 (ex. VAT)
    In Stock and Available for Delivery

    Surface Preparation Kits for Steel

    These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools)1 x Rust-Oleum...

    Price £21.53 (ex. VAT)
    In Stock and Available for Delivery