Rust-Oleum Hard Hat 2102 Adhesion Primer

Manufacturer:

Rust-Oleum Hard Hat 2102 Adhesion Primer should be used on galvanized steel, stainless steel, aluminium, copper, glass, porcelain and other smooth, dense surfaces followed by Rust-Oleum Hard Hat Topcoats. Intended for small maintenance jobs. Should be used in light industrial exposures, normal humidity and interior applications.

Bulk Buy

£8.28 tax excl.

£9.94   tax incl.
Available colours:

Product Description

Rust-Oleum Hard Hat 2102 Adhesion Primer should be used on galvanized steel, stainless steel, aluminium, copper, glass, porcelain and other smooth, dense surfaces followed by Rust-Oleum Hard Hat Topcoats. Intended for small maintenance jobs. Should be used in light industrial exposures, normal humidity and interior applications.

Features & Benefits

  • Durable adhesion to galvanised, stainless steel, aluminium, copper, hard PVC, glass and ceramics
  • Ready to recoat after 30 minutes (within 24 hours)
  • Ideal with Rust-Oleum Hard Hat Topcoats
  • Durable adhesion to difficult substrates
  • Transparent blue appearance
  • Special fan spray nozzle for a uniform application
  • Large coverage: 5.5m² per aerosol

Surface Preparation
Remove dirt, grease, oil and all other surface contaminants by appropriate means. Remove previous coatings completely e.g. with Rust-Oleum Nr.1 Green Paint Stripper. The surface must be clean and dry during application.

Directions for Use
Remove cover cap. Shake vigorously for at least one minute after the rattle of mixing ball is heard. Shake frequently during use. Hold can at least 25cm from surface. Use back and forth motion keeping can parallel with surface. Ensure that can is in motion when spray button is pressed to avoid runs and sags. Apply a single, thin layer and avoid application of thick layers. After use turn can upside down and press spray button for 2 - 3 seconds to clean valve.

Application Conditions
For good results the relative humidity shall be below 85% and the temperature of the can and substrate above 0°C.

Remarks
Recoat as soon as possible after 30 minutes to avoid dust/dirt entrapment in the tacky coat.

It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.

Technical Data

Typical Coverage (per coat)5.5m² per can
Touch DryDoes not dry
ApplicationSpray
The figures stated above are approximate. Please ensure you refer to all datasheets for full application information.

Download

Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.

Questions



Be the first to ask a question about this product!

Question about the product

* Required fields
Send

The question has been correctly sent

Free delivery

On orders over
£75.00 + VAT

Low trade prices

Our best trade prices on everything!

Technical Advice

Fast FREE Technical Advice for Products & Projects

Click & collect

Order and collect from
our Leeds based trade store.
silent-exothermic unable