Cromadex Super Build Primer Aerosol is a high quality, very fast drying build primer. This results in an easily sanded non-porous surface that is suitable for a wide range of topcoats The product has good adhesion to bare metal, excellent coverage and filling properties, and is easy to sand both wet and dry (from P400).
Rust-Oleum Hard Hat 2120 Galva Plus
Rust-Oleum Hard Hat 2120 Galva Plus is a heat-resistant up to 150°C, fast drying zinc/aluminium coating that contains pure zinc and aluminium as pigment to quickly and easily renew the gloss on zinc surfaces. Intended to be applied on small areas or for touch-up. The product should be used as a single coat in light industrial exposures and corrosive environments for galvanised steel and other metals.
- Appearance similar to new galvanised
- For touching-up new galvanised
- Resists 310 hours of salt spray testing (DIN 50021 SS)
- Lower zinc contents, more aluminium
Rust-Oleum Hard Hat 2120 Galva Plus
Rust-Oleum Hard Hat 2120 Galva Plus is a fast drying zinc/aluminium coating that contains pure zinc and aluminium as pigment. Rust-Oleum Hard Hat 2120 Galva Plus is intended to be applied on small areas or for touch-up. The product should be used as a single coat in light industrial exposures and corrosive environments for galvanised steel and other metals.
Features & Benefits
- Aluminium gloss appearance
- Similar look to new galvanised
- For new, bare, rust free metal or galvanised steel
- Ideal for touching-up of new galvanised
- Resists 310 hours of salt spray testing (DIN)
- Heat-resistant up to 150 °C
- To handle after 1 hour (at 20°C)
- Gloss Level: Matt, Metallic
- Propellant: Dimethyl ether
- Heat Resistance: 150°C (dry heat)
Drying Time At 20°C/RH 50%
- Touch dry: 15 minutes
- Dry to handle: 60 minutes
- Dry to recoat: Within 2 hours or after 48 hours
- Fully cured: 7 days
- 1,7 m² per spray can at 25 µm dry
Practical coverage depends on many factors such as porosity and roughness of the substrate and material losses during application.
Please contact Rawlins Paints' Technical Support Team on 0113 2455450 for more information.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
- Dry to Handle (at 20°C)
- 1 Hour
- Dry to Recoat (at 20°C)
- Within 2 hours or after 48 hours
- Fully Cured (at 20°C)
- 7 Days
- Heat Resistance (up-to)
- 150°C (dry heat)
- 655 g/l
- Shelf Life (from date of manufacture)
- 3 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5° and 35°C.
- Touch Dry
- 15 Minutes
- Recommended Dry Film Thickness
- 25 µm
- Recommended Wet Film Thickness
- 100 µm
- UN Number
- UN 1950
Be the first to ask a question about this product!
Rust-Oleum Hard Hat 2169/2182 Anti-Rust Primer is to be used on new, bare or slightly rusted steel surfaces to prevent further rusting and corrosion. Rust-Oleum Hard Hat Anti-Rust/Anti-Corrosion Primers are for industrial exposure and should be over coated if necessary with the Rust-Oleum Hard Hat Topcoats range. Ready to recoat after just...
Rust-Oleum Hard Hat 2185/1085 Galva Zinc is the No.1 high zinc content coating providing superior protection and durability for metals exposed to the elements or adverse artificial conditions. Can be used as a primer or as a single coat in light industrial exposures, corrosive environments and high humidity areas. 90% zinc content, touch dry...
Cromadex Acid Etch Primer Aerosol is a high quality fast dry spraying primer, offering excellent adhesion on many difficult to coat substrates, including aluminium, alloy, stainless steel and zintec. Acid Etch contains active rust prevention pigments, is very fast drying and can be overcoated with most Cromadex topcoats.
Rust-Oleum Hard Hat 2180 Galva Expresse is a heat-resistant up to 350°C, super-fast zinc rich primer containing pure zinc as pigment to provide excellent protection against corrosion. Should be used on new, bare steel or galvanised steel surfaces as a primer or as a single coat finish in light industrial exposures, corrosive environments and...
Cromadex Monozinc Aerosol is a high quality fast drying zinc spray to treat galvanized and untreated steel. The product is resistant to petrol, chemicals and weather influences. The product is spot-weldable and has excellent adhesion. Cromadex Monozinc Aerosol contains more than 90% Zinc in the dry film. Monozinc is suitable for overcoating with Cromadex...
Rust-Oleum Hard Hat 2102 Adhesion Primer should be used on galvanized steel, stainless steel, aluminium, copper, glass, porcelain and other smooth, dense surfaces followed by Rust-Oleum Hard Hat Topcoats. Intended for small maintenance jobs. Should be used in light industrial exposures, normal humidity and interior applications. Ready to...
Teamac Zinc Rich Primer Aerosol, is very high concentration of metallic zinc gives cathodic protection and is a form of cold galvanising. Cold galvanises metal Protects against corrosion Use on iron Use on steel Click to jump down to Technical Data Coverage Calculator
Great for priming interior surfaces and spot priming exterior surfaces. It is formulated to seal, prime and block out stains on previously painted or new work and dries in minutes.
Make spray painting jobs simple and comfortable with Rust-Oleum High Performance Comfort Grip. Its ergonomic design provides maximum control when using an aerosol paint, making it easy to complete large projects.
Rust-Oleum Hard Hat 2990 Stain Blocker is a matt white high-pigmented coating for the permanent isolation of problem stains from nicotine, soot, tar, rust, the effects of moisture, graffiti, and numerous other colourings. A renovation paint which can be applied directly on ceilings, plaster, cement, wood, concrete, wallpaper, isolation walls,...
Cromadex Alu-Zinc Primer Aerosol is a high quality fast drying alu-zinc spray to treat galvanized and untreated steel. The product is resistant to petrol, chemicals and weather influences.The product is spot-weldable and has excellent adhesion.
Cromadex Galva Spray Aerosol is a high quality fast drying zinc spray to treat galvanized and untreated steel. The product is resistant to petrol, chemicals and weather influences. The product is spot-weldable and has excellent adhesion.