Cromadex Super Build Primer Aerosol
Cromadex Super Build Primer Aerosol is a high quality, very fast drying build primer. This results in an easily sanded non-porous surface that is suitable for a wide range of topcoats.
- Good adhesion to bare metal,
- Excellent coverage and filling properties
- Easy to sand both wet and dry (from P400)
Cromadex Super Build Primer Aerosol is a high quality, very fast drying build primer. This results in an easily sanded non-porous surface that is suitable for a wide range of topcoats The product has good adhesion to bare metal, excellent coverage and filling properties, and is easy to sand both wet and dry (from P400).
The surface should be clean, dry and free of grease. Remove loose old lacquer and rust and sand the surface. The aerosol should have room temperature. Best processing temperature 15 to 25°C. Before use, shake the aerosol for 2 minutes and spray a sample. Distance to the surface to be treated approximately 25 centimetres. Apply the Super Build Primer in several layers allowing 3-5 minutes between coats. Before applying the next layer, again shake the aerosol. After use, clean the valve (turn aerosol upside down and press the nozzle for approximately 5 seconds).
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Be the first to ask a question about this product!