Cromadex Galva Spray Aerosol
Cromadex Galva Spray Aerosol is a high quality fast drying zinc spray to treat galvanized and untreated steel.
- Resistant to petrol, chemicals and weather influences
- Excellent adhesion
Cromadex Galva Spray Aerosol is a high quality fast drying zinc spray to treat galvanized and untreated steel. The product is resistant to petrol, chemicals and weather influences. The product is spot-weldable and has excellent adhesion.
The surface should be clean, dry and free of grease. Remove loose old lacquer and rust and sand the surface. The aerosol should have room temperature. Best processing temperature 15 to 25°C. Before use, shake the aerosol for 2 minutes and spray a sample. Distance to the surface to be treated approximately 25 to 30 centimetres.
Apply the Galva spray in several thin layers. Before applying the next layer, again shake the aerosol. When desired, after drying, a primer and a lacquer can be applied. After use, clean the valve (turn aerosol upside down and press the nozzle for approximately 5 seconds).
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Be the first to ask a question about this product!