Rust-Oleum Rust Reformer
Can be applied directly to rusted metal to create a ready-to-paint surface without the need for sanding. Prevents further rusting
Rust Reformer is another versatile product from Rust-Oleum which can be applied directly to rusted metal to create a ready-to-paint surface without the need for sanding. Prevents further rusting.
Features & Benefits
- Instantly converts rust to a non-rusting surface
- Apply to rusty metal only
- Compatible with most solvent or oil-based paints
- Indoor / Outdoor
- Durable, corrosion-resistant
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Be the first to ask a question about this product!
Cromadex Super Build Primer Aerosol is a high quality, very fast drying build primer. This results in an easily sanded non-porous surface that is suitable for a wide range of topcoats The product has good adhesion to bare metal, excellent coverage and filling properties, and is easy to sand both wet and dry (from P400).
Cromadex Acid Etch Primer Aerosol is a high quality fast dry spraying primer, offering excellent adhesion on many difficult to coat substrates, including aluminium, alloy, stainless steel and zintec. Acid Etch contains active rust prevention pigments, is very fast drying and can be overcoated with most Cromadex topcoats.
Rust-Oleum Hard Hat 2185/1085 Galva Zinc is the No.1 high zinc content coating providing superior protection and durability for metals exposed to the elements or adverse artificial conditions. Can be used as a primer or as a single coat in light industrial exposures, corrosive environments and high humidity areas. 90% zinc content, touch dry...
Cromadex Galva Spray Aerosol is a high quality fast drying zinc spray to treat galvanized and untreated steel. The product is resistant to petrol, chemicals and weather influences. The product is spot-weldable and has excellent adhesion.
A heat-resistant up to 350°C, super-fast zinc rich primer containing pure zinc as pigment to provide excellent protection against corrosion. Should be used on new, bare steel or galvanised steel surfaces as a primer or as a single coat finish in light industrial exposures, corrosive environments and high humidity areas.
Rust-Oleum Hard Hat 2990 Stain Blocker is a matt white high-pigmented coating for the permanent isolation of problem stains from nicotine, soot, tar, rust, the effects of moisture, graffiti, and numerous other colourings. A renovation paint which can be applied directly on ceilings, plaster, cement, wood, concrete, wallpaper, isolation walls,...
Cromadex Monozinc Aerosol is a high quality fast drying zinc spray to treat galvanized and untreated steel. The product is resistant to petrol, chemicals and weather influences. The product is spot-weldable and has excellent adhesion. Cromadex Monozinc Aerosol contains more than 90% Zinc in the dry film. Monozinc is suitable for overcoating with Cromadex...
Make spray painting jobs simple and comfortable with Rust-Oleum High Performance Comfort Grip® . Its ergonomic design provides maximum control when using an aerosol paint, making it easy to complete large projects.
Cromadex Alu-Zinc Primer Aerosol is a high quality fast drying alu-zinc spray to treat galvanized and untreated steel. The product is resistant to petrol, chemicals and weather influences.The product is spot-weldable and has excellent adhesion.
To be used on new, bare or slightly rusted steel surfaces to prevent further rusting and corrosion. Rust-Oleum Hard Hat Anti-Rust/Anti-Corrosion Primers are for industrial exposure and should be over coated if necessary with the Rust-Oleum Hard Hat Topcoats range.
Rust-Oleum Hard Hat 2102 Adhesion Primer should be used on galvanized steel, stainless steel, aluminium, copper, glass, porcelain and other smooth, dense surfaces followed by Rust-Oleum Hard Hat Topcoats. Intended for small maintenance jobs. Should be used in light industrial exposures, normal humidity and interior applications.
A heat-resistant up to 150°C, fast drying zinc/aluminium coating that contains pure zinc and aluminium as pigment to quickly and easily renew the gloss on zinc surfaces. Intended to be applied on small areas or for touch-up. The product should be used as a single coat in light industrial exposures and corrosive environments for galvanised...
Great for priming interior surfaces and spot priming exterior surfaces. It is formulated to seal, prime and block out stains on previously painted or new work and dries in minutes.