Jotun Jota Armour WG is a Winter Grade version of the standard Jota Armour to allow faster curing in lower temperatures. It is a three component, abrasion resistant, polyamine cured epoxy coating specially designed as an anti-skid coating. Suitable for approved primers or directly on concrete substrates.
Jotun Jota Armour
Jotun Jota Armour is a three component, abrasion resistant, polyamine cured epoxy coating specially designed as an anti-skid coating. Suitable for approved primers or directly on concrete substrates - such as helidecks, walkways, ramps, weigh bridge decks, decks in general where abrasion resistance and non-slip properties are required.
Jotun Jota Armour is a three component, abrasion resistant, polyamine cured epoxy coating specially designed as an anti-skid coating. Suitable for approved primers or directly on concrete substrates.
Jotun Jota Armour can be used on helidecks, walkways, ramps, weigh bridge decks, decks in general where abrasion resistance and non-slip properties are required.
Approvals and certificates
- Approved to UK Defence Standard 80-134/1 for the Royal Navy, flight decks, hangar decks and weather decks
- Pre-qualification testing in acordance with NORSOK M-501, Rev. 5, System 4, suitable for decks and walkways.
Additional certificates and approvals may be available on request.
Features & Benefits
- Spray application – no trowelling
- High build – one coat system
- Non-slip surface
- non-slip performance in wet, oily and icy conditions
Rough and tough
Jota Armour combines a high solids, surface tolerant . abrasion resistant, epoxy coating with a selected blend of fused aluminium oxide.
High coefficient og friction (COF)
The surface profile is rough with deep and sharp asperities – creating a high COF that provides exceptional non-slip properties for people and equipment even when applied on a sloping ramp or walk-way.
Baltoflake is pre-qualified in NORSOK coating systems (System no.4).
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Be the first to ask a question about this product!
Ennis-Flint MMAXGrip PRMX 45 is designed as a versatile MMA coating for application to bituminous substrates, possesses excellent abrasion-resistance and non-skid properties and was developed specifically as a heavy-duty surfacing and can be applied to asphalt substrates without a primer. The product is used as a priming surfacer, a topping layer and...
Axalta Highway Anti-Skid Traffic Paint is a highly durable, fast drying, low-slip traffic paint based on a specially modified chlorinated rubber system. The coating is coloured with chemical and weather resistant pigments. developed as a traffic line / parking bay paint with low-slip properties, suitable for application to asphalt, concrete, block paving...
Smartkote Protectakote UVR is a tough anti-slip aliphatic polyurethane coating, which forms a colour-fast, abrasion and weather resistant film. Protectakote UVR is single component, ready to use and easy to apply. Protectakote UVR is easy to apply and ideal to create anti-slip areas on exterior and interior surfaces.
Ennis-Flint Stonegrip is a specialist, hand applied surface treatment, consisting of a thermosetting, modified epoxy resin binder, dressed with a decorative aggregate. A wide range of aggregates are available comprising of different colours and sizes.
Smartkote Protectakote WB Smooth is a water-based, smooth polyurethane coating. This water-based solvent-free formulation is weather resistant, has a low odour, and is non-flammable for both interior and exterior applications. It’s enhanced with polyurethane for ultimate toughness, with excellent resistance to abrasion, chemicals and solvents....
Blackfriar Anti-Slip Step Paint is specially designed for steps, contains an aggregate that helps to reduce the risk of slipping, while providing an attractive hardwearing finish.
Smartkote Safekote is a ready-to-use polyurethane coating that provides an attractive, abrasion resistant anti-slip surface. The fine texture is provided by small silica particles which will not hurt bare feet, making it ideal for showers, change rooms, ablution blocks and other surfaces in environments such as hospitals, hotels or children’s...
501 Anti Slip Floor Paint is a ready mixed floor coating which creates a textured surface with excellent grip properties for foot and light truck traffic areas. Ideal anywhere anti slip properties are important providing durability, decoration and protection.
Blackfriar Anti-Slip Deck Coating allows the beauty of wood and timber decking to show through. ADVANTAGES Provides a slip-resistant surface in wet conditions Clear, low sheen finish Ideal for foot traffic Can be applied over new or existing decking stains or bare timber Micro-aggregates give increased grip Excellent coverage
Ennis-Flint MMAXGRIP PRMX 65 is a MMA-based coating that was developed specifically for application to public main roads and side streets as well as other traffic zones. Its special properties make MMAXGRIP PRMX 65 particularly suitable for surfaces where coloured road markings are required on main roads and side streets in urban areas and elsewhere.
Coo-Var Suregrip Anti-Slip Floor Paint is a ready-mixed aggregated floor coating which provides a rough anti-slip finish to floors when dry. ADVANTAGES Durability Decoration Protection Interior/Exterior use Light truck traffic Available in 8 colours Can even be used as a high grip surface on climbing walls
Smartkote Protectakote is a single component, ready-to-use, anti-slip coating with polyurethane performance for ultimate toughness. The course profile textured surface is ideal for interior floors, factory work-stations, walkways, stairs, ramps, vehicles and other areas where a flexible, durable and long lasting anti-slip surface is important....
703 MMA Flexible Anti-Slip Coating is a fast curing, flexible coating for interior or exterior tarmac and asphalt surfaces enhanced by the incorporation of slip resistant aggregates premixed into the resin.
Rust-Oleum 7100NS Anti-Slip Floor Coating is an easy to apply, solvent based anti-slip floor coating: For foot traffic, interior and exterior Anti-slip additive is premixed in the coating For use on old concrete (>2 yrs), metal and wood Unique uniform appearance, high gloss Touch dry: 6 hours, coverage: 8m² per litre Available in...
A one coat, hard wearing epoxy resin anti-slip coating for concrete, stone, metal and wood. Solvent-free and virtually odour-free, Rust-Oleum SuperGrip Treadsafe is finished with hard-wearing carborundum particles and will easily withstand heavy traffic including forklift trucks and harsh chemicals.