Teamac Suregrip Deck Paint
  • Teamac Suregrip Deck Paint
  • Teamac Suregrip Deck Paint
  • Teamac Suregrip Deck Paint
  • Teamac Suregrip Deck Paint

Teamac Suregrip Deck Paint

532/G139/ ALL

Teamac Suregrip Deck Paint, is a modified alkyd, ready mixed, aggregated deck coating which provides a rough anti-slip finish when dry

Colour
  • Current colour: Blue (Aggregated)
Choose a colour
Close colour picker
  • White (Aggregated)
  • Light Grey (Aggregated)
  • Grey (Aggregated)
  • Black (Aggregated)
  • Blue (Aggregated)
  • Yellow (Aggregated)
  • Red (Aggregated)
  • Green (Aggregated)
  • Buttermilk (Aggregated)
Size
£17.01
VAT excluded

£20.41 Tax incl.
Quantity

Description

Teamac Suregrip Anti-Slip Deck Paint is a modified alkyd, ready mixed, aggregated deck coating which provides a rough anti-slip finish when dry. Teamac Suregrip Anti-Slip Deck Paint provides extra protection for crew-members while traversing the deck of a boat in motion or vessel in rough seas. Teamac Suregrip Anti-Slip Deck Paint is a safety coating which can be used inside and outside, where a sure footholding is required.



Click To Jump To Section:




Features & Benefits


  • Suitable for:
  • Foot traffic
  • Light truck traffic
  • Use on wood
  • Use on metal
  • Use on concrete
  • Use on GRP
  • Available in a range of colours



Product Specification


Technical Data
Volume Solids 58 - 62%
VOC Content 343 g/litre
SG 1.35 - 1.55 @ 20 °C
Finish Aggregated
Viscostity 6.5 Poise @ 25C
Flash Point above 32°C (closed cup)



Film Thickness Range And Coverage


Product Data
  Dry Film Thickness Wet Film Thickness Theoretical Coverage
Minimum 60 µm 100 µm 6 m2/litre (based on brush application)
Maximum 100 µm 150 µm 10 m2/litre (based on brush application)
The practical spreading rate may be lower as this depends on factors such as the porosity and roughness of the surface to be painted and material losses during application.



Drying Times


Drying Times At 20°C/RH 50%
Touch Dry: 6 Hours
Dry To Recoat: 16 Hours
Fully Cured: 5 - 7 Days

Low temperature and high humidity will adversely affect application, drying and performance of any coating.



Surface Preparation


  • All surfaces should be clean, dry, sound and free from contaminants.
  • Other surfaces have to be prepared and primed with the suitable primer for that substrate.
  • Existing painted surfaces - Surfaces should be cleaned, degreased and sanded to ensure an adequate "key" is produced. Remove all loose and flaking material and treat bare areas as new substrate and prepare accordingly



Mixing


Stir well before use.

Do not use mechanical shaker.



Thinner


Do not thin.



Application Conditions


As dictated by normal good painting practice. In confined spaces, provide adequate ventilation during application and drying.



Application Methods


Method Airless Spray Conventional Spray Brush Roller
  No No Yes Yes



  • Nozzle Pressuer: Thinners 14
  • Cleaning Solvent: Thinners 14



Health & Safety


See safety data sheet - SDS 10491

Click to go back to the top of the page

It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.

Product Details
532/G139/ ALL

Data sheet

Suitable Substrates
Wood, metal, concrete, GRP
Application
Brush, Roller
Dry to Recoat (at 20°C)
16 Hours
Coverage
6 m²/litre
Coverage
6-10m² per litre
Recommended Thinner/Cleaner
Thinners 14
Solids by Volume
58 - 62%
VOC
343 g / litre
Touch Dry
6 Hours
Finish
Aggregated
Recommended Dry Film Thickness
60
Recommended Wet Film Thickness
100
UN Number
1263
Full Cured (at 22°C)
5 - 7 Days
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


questions Katherine Heath on 23/03/2019
Question: 

Ho, do you do samples? We are struggling to get the colour grey we want so would like a small sample first. Thanks Katherine

Answer: 

Samples aren't available of this product but we do have a very good colour card for this product which shows the colours and finish of the product very well. If you'd like to provide an address we can post this to you.

questions Stuart on 24/06/2018
Question: 

Will this be ok to use on garden decking

Answer: 

Pre-tanalised decking will eventually loose adhesion when painted, however if you wish to apply Teamac Suregrip Deck Paint, Jet wash the decking, allow to thoroughly dry and prime with Teamac Wood Primer. Finish with 2 - 3 coats of Teamac Suregrip Deck Paint.

questions Rita on 01/08/2017
Question: It might sound a dull question do u think this will be ok to paint a wooden ladder in a above ground swimming pool
Answer: 

Teamac Suregrip Deck Paint has a very coarse anti-slip texture and wouldn't be suitable for bare feet or submersion in water. If the ladder is out of water and not subject to bare feet it would be fine.

questions Anna on 26/01/2017
Question: Is this available in more colours? Can the aggregate be added to any of the Teamac marine gloss topcoats?
Answer: 

Teamac Suregrip Deck Paint is not available in any other colours than the ones listed on our website. You could use Anti-Slip Aggregates in other smooth floor paints available in a wider colour range, or you could over paint Teamac Suregrip Deck Paint with a smooth floor paint once applied to change the appearance.

questions Craig Daniels on 15/03/2016
Question: 

Can I apply the Teamac sure grip with a spray gun?

Answer: 

No, it is for brush and roller application only. The product has a pre-mixed aggregate in the paint and this will prevent it from being successfully sprayed.

  

Question about the product

* Required fields
(read)
Send
16 other products in the same category:

Rust-Oleum SuperGrip Anti-Slip Spray

Rust-Oleum SuperGrip Anti-Slip Spray is a fast drying spray paint containing a special anti-slip additive. It can be applied on metal, concrete, ceramic and wood surfaces making virtually any surface non-skid instantly, ideal for small maintenance jobs or for touch-up. Light duty anti-slip finish Adheres to metal, wood, concrete, tile...

Price £11.69
In stock

Sikafloor 264 N Thixo

Sikafloor 264 N Thixo is a two part, economic, coloured epoxy resin textured roller and seal coat. This Sikafloor product is solvent free, thixothropic grade for high build textured and structured finishes.

Price £314.52
In stock

Hydron Nu-Base SP Floor Finish

Nu-Base SP Floor Finish is a fast-drying floor paint for protecting flooring substrates from mild chemicals and solvents, whilst giving an excellent decorative appearance. Advantages Fast-drying Standard or non-slip versions Available in all RAL colours Interior and exterior use Fast-drying 12-month shelf life

Price £57.00
In stock

Sherwin-Williams Epidek M339

Sherwin-Williams Epidek M339 is a 3-pack epoxy high build anti-slip deck coating designed for spray application using suitable equipment as a high profile anti-slip deck paint. It may also be applied directly to suitable sound deck coatings. 

Price £174.93
In stock

Coo-Var Anti-Slip Acrylic Floor Paint

Coo-Var Anti-Slip Acrylic Floor Paint is used to provide a durable and hard wearing surface with an anti-slip finish. This product has been independently tested and has a PTV rating of 68 in dry conditions and 58 in wet. UK law recommends on a minimum Pendulum Test Value on floors of 36 dry, wet or contaminated. Product Features Low...

Price £27.20
In stock

Jotun Jota Armour WG

Jotun Jota Armour WG is a Winter Grade version of the standard Jota Armour to allow faster curing in lower temperatures. It is a three component, abrasion resistant, polyamine cured epoxy coating specially designed as an anti-skid coating. Suitable for approved primers or directly on concrete substrates.

Price £116.41
In stock

RSL Resubind CP

Resubind CP, a 3 component, non-pigmented, solvent-free polyurethane binder designed for car park decks, walkways and driveways, surface dressed with aggregates to create non-slip, hard wearing, textured floor finishes. Can be used in interior or exterior car park decks on a variety of substrates. Different aggregates can be used to create...

Price £130.00
In stock

Smartkote Safekote

Smartkote Safekote is a ready-to-use polyurethane coating that provides an attractive, abrasion resistant anti-slip surface. The fine texture is provided by small silica particles which will not hurt bare feet, making it ideal for showers, change rooms, ablution blocks and other surfaces in environments such as hospitals, hotels or children’s...

Price £24.96
In stock

Ennis-Flint MMAXGrip PRMX 45

Ennis-Flint MMAXGrip PRMX 45 is designed as a versatile MMA coating for application to bituminous substrates, possesses excellent abrasion-resistance and non-skid properties and was developed specifically as a heavy-duty surfacing and can be applied to asphalt substrates without a primer. The product is used as a priming surfacer, a topping layer and...

Price £109.15
In stock

Rust-Oleum SuperGrip Treadsafe

A one coat, hard wearing epoxy resin anti-slip coating for concrete, stone, metal and wood. Solvent-free and virtually odour-free, Rust-Oleum SuperGrip Treadsafe is finished with hard-wearing carborundum particles and will easily withstand heavy traffic including forklift trucks and harsh chemicals. Tough, long lasting finish Coarse...

Price £114.87
In stock

Instarmac UltraCrete QC10 F Rapid Set Flowable Concrete

A fibre modified concrete for backfilling around manhole frames and gullies and can also be used for surface repairs. HAPAS Approved since 2005 Shrinkage compensated Rapid set: 10-20 minutes 20N/mm² compressive Open to traffic: 90 minutes strength after 90 minutes

Price £20.15
In stock

Ennis-Flint Stonegrip

Ennis-Flint Stonegrip is a specialist, hand applied surface treatment, consisting of a thermosetting, modified epoxy resin binder, dressed with a decorative aggregate. A wide range of aggregates are available comprising of different colours and sizes.

Price £341.50
In stock

503 Easy Clean Anti Slip Coating

503 Easy Clean Anti Slip Coating is a high-build epoxy resin coating containing a hard wearing fine particle anti slip additive that is pre-dispersed into the resin and held in suspension. The result provides a ready to use product that leaves an evenly textured, slip resistant surface that is easy to clean and extremely durable.

Price £80.80
In stock

Remmers PUR Grip 100

Remmers PUR Grip 100 is a solvent free, flexible, three component, fast cure anti-skid system used as an anti-skid system onto various surfaces. It offers a degree of flexibility and can be used inside and out. Ideal for metal bridge decks, loading bays, pedestrian walkways, ramps and car parks, footpaths, roads and pavements, driveways,...

Price £165.15
In stock

Smartkote Protectakote

Smartkote Protectakote is a single component, ready-to-use, anti-slip coating with polyurethane performance for ultimate toughness. The course profile textured surface is ideal for interior floors, factory work-stations, walkways, stairs, ramps, vehicles and other areas where a flexible, durable and long lasting anti-slip surface is important....

Price £18.29
In stock

703 MMA Flexible Anti-Slip Coating

703 MMA Flexible Anti-Slip Coating is a fast curing, flexible coating for interior or exterior tarmac and asphalt surfaces enhanced by the incorporation of slip resistant aggregates premixed into the resin.

Price £106.32
In stock