Coo-Var Anti-Slip Acrylic Floor Paint
  • Coo-Var Anti-Slip Acrylic Floor Paint

Coo-Var Anti-Slip Acrylic Floor Paint

117/W460

Coo-Var Anti-Slip Acrylic Floor Paint is used to provide a durable and hard-wearing surface with an anti-slip finish.

ADVANTAGES

  • Internal/external use
  • Low odour
  • Fast drying
  • Water-based
  • 68 PTV rating in dry
  • 58 PTV rating in wet
Colour
  • Current colour: Clear
Choose a colour
Close colour picker
  • Clear
  • White
  • Black
  • Tile Red
  • Forest Green
  • Light Grey
  • Grey
  • Yellow
Size
Finish
£27.20
VAT excluded

£32.64 Tax incl.
Quantity

Description

Coo-Var Anti-Slip Acrylic Floor Paint is used to provide a durable and hard-wearing surface with an anti-slip finish. This product has been independently tested and has a PTV rating of 68 in dry conditions and 58 in wet. UK law recommends on a minimum Pendulum Test Value on floors of 36 dry, wet or contaminated. Suitable for indoor and outdoor use.

Recommended Uses

  • Concrete
  • Wood
  • Tarmac
  • stone
  • Brickwork
  • Prepared metal

Substrate Preparation

All surfaces should be clean, dry, sound and free from contaminants.

Concrete - power floated, granolithic and smooth surfaces should be roughened first to provide a good "key" for the paint. This can be done mechanically by abrading or blasting, or chemically, using Coo-Var Acid Etch. These processes will have the advantage in addition to preparing the surface of also removing dirt and laitance.

New concrete must be allowed to cure thoroughly which can take up to 3 months. Other surfaces have to be prepared and primed with the suitable primer for that substrate.

Existing painted surfaces - Surfaces should be cleaned, degreased and sanded to ensure an adequate "key" is produced. Remove all loose and flaking material and treat bare areas as new substrate and prepare accordingly.

Preceding Coat:

Apply direct to wood

Coo-Var Water Based All Metals Primer on Metal

Coo-Var Anti-Slip Acrylic Floor Paint thinned 5% with clean water on all other unpainted surfaces.

Application

Apply by brush or roller.

Drying time

Touch dry in one hour

Hard dry in 2 hours

Overcoat time

6 hours

Estimated Coverage: 5-9 sq m²/litre

Please contact Rawlins Paints' Technical Support Team on 0113 2455450 for more information.

It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.

Product Details
117/W460

Data sheet

Application
Brush, Roller
Coverage
5 - 9m² per litre
Touch Dry
1 Hour
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


questions Pat Griffin on 15/01/2019
Question: 

Hi, I have always applied every year 2 pack floor paint to a concrete floor in our fish processing area where there would be a wet area, this paint is not non slip and needs coating once a year, I have got a quotation from a specialist company to re do this floor but the price i was quoted is ridiculous. so could you recommend something non slip and hard wearing

Answer: 

We would suggest 503 Easy Clean Anti Slip Coating, this is a high-build epoxy resin coating containing a hard wearing fine particle anti slip additive that is pre-dispersed into the resin and held in suspension. The result providers a ready to use product that leaves an evenly textured, slip resistant surface that is easy to clean and extremely durable.


Question about the product

* Required fields
(read)
Send
16 other products in the same category:

502 HD Anti Slip Coating

502 HD Anti Slip Coating is applied by brush or roller in one thick, durable coat and it will provide a heavily textured finish incorporating an anti-slip aggregate which is dispersed within the material upon application. Each pack contains sufficient material to provide a slip resistant epoxy coating system to 5 square metres of surface.

Price £70.17
In stock

Blackfriar Professional Anti-Slip Floor Paint

Blackfriar Professional Anti-Slip Floor Paint is suitable for concrete, cement, brickwork, masonry, wood, stone, and metal surfaces:  Excellent slip-resistance Tough and durable coating Resists grease and oil Resists light foot traffic For interior/exterior use Ideal for light industrial, commercial and domestic floors Economic and...

Price £14.09
In stock

Sherwin-Williams Epidek M339

Sherwin-Williams Epidek M339 is a 3-pack epoxy high build anti-slip deck coating designed for spray application using suitable equipment as a high profile anti-slip deck paint. It may also be applied directly to suitable sound deck coatings. 

Price £174.93
In stock

Blackfriar Anti-Slip Step Paint

Blackfriar Anti-Slip Step Paint is specially designed for steps, contains an aggregate that helps to reduce the risk of slipping, while providing an attractive hardwearing finish.

Price £11.61
In stock

Smartkote Protectakote UVR

Smartkote Protectakote UVR is a tough anti-slip aliphatic polyurethane coating, which forms a colour-fast, abrasion and weather resistant film. Protectakote UVR is single component, ready to use and easy to apply. Protectakote UVR is easy to apply and ideal to create anti-slip areas on exterior and interior surfaces.

Price £24.96
In stock

Smartkote Protectakote WB

Smartkote Protectakote WB is a water-based anti-slip polyurethane coating. Its textured finish is ideal to create safe, anti-slip walkways, steps and ramps on light industrial and commercial floors, for both interior and exterior applications. This water-based solvent-free formulation is weather resistant, has a low odour, and is...

Price £20.40
In stock

Ennis-Flint MMAXGrip PRMX 45

Ennis-Flint MMAXGrip PRMX 45 is designed as a versatile MMA coating for application to bituminous substrates, possesses excellent abrasion-resistance and non-skid properties and was developed specifically as a heavy-duty surfacing and can be applied to asphalt substrates without a primer. The product is used as a priming surfacer, a topping layer and...

Price £109.15
In stock

Coo-Var Suregrip Anti-Slip Floor Paint

Coo-Var Suregrip Anti-Slip Floor Paint is a ready-mixed aggregated floor coating which provides a rough anti-slip finish to floors when dry. ADVANTAGES Durability Decoration Protection Interior/Exterior use Light truck traffic Available in 8 colours Can even be used as a high grip surface on climbing walls

Price £20.21
In stock

501 Anti Slip Floor Paint

501 Anti Slip Floor Paint is a ready mixed floor coating which creates a textured surface with excellent grip properties for foot and light truck traffic areas. Ideal anywhere anti slip properties are important providing durability, decoration and protection.

Price £43.35
In stock

703 MMA Flexible Anti-Slip Coating

703 MMA Flexible Anti-Slip Coating is a fast curing, flexible coating for interior or exterior tarmac and asphalt surfaces enhanced by the incorporation of slip resistant aggregates premixed into the resin.

Price £106.32
In stock

Rust-Oleum 7100NS Anti-Slip Floor Coating

Rust-Oleum 7100NS Anti-Slip Floor Coating is an easy to apply, solvent based anti-slip floor coating: For foot traffic, interior and exterior Anti-slip additive is premixed in the coating For use on old concrete (>2 yrs), metal and wood Unique uniform appearance, high gloss Touch dry: 6 hours, coverage: 8m² per litre Available in...

Price £38.43 Regular price £42.70
In stock

Hydron Nu-Base SP Floor Finish

Nu-Base SP Floor Finish is a fast-drying floor paint for protecting flooring substrates from mild chemicals and solvents, whilst giving an excellent decorative appearance. Advantages Fast-drying Standard or non-slip versions Available in all RAL colours Interior and exterior use Fast-drying 12-month shelf life

Price £57.00
In stock

Jotun Jota Armour

Jotun Jota Armour is a three component, abrasion resistant, polyamine cured epoxy coating specially designed as an anti-skid coating. Suitable for approved primers or directly on concrete substrates - such as helidecks, walkways, ramps, weigh bridge decks, decks in general where abrasion resistance and non-slip properties are required.

Price £108.83
In stock

503 Easy Clean Anti Slip Coating

503 Easy Clean Anti Slip Coating is a high-build epoxy resin coating containing a hard wearing fine particle anti slip additive that is pre-dispersed into the resin and held in suspension. The result providers a ready to use product that leaves an evenly textured, slip resistant surface that is easy to clean and extremely durable.

Price £80.80
In stock

RSL Resugrip

Resugrip is a high-build, pigment and solvent-free polyurethane floor binder for when anti-slip is essential. It is designed to be added to surface dressing with aggregates and is very hard-wearing. ADVANTAGES Good chemical resistance High bond strength Will cure at temperatures down to 5°C Coloured aggregates are available to make it decorative...

Price £120.29
In stock

Teamac Suregrip Deck Paint

Anti-slip marine coating specially made for the decks of sea faring vessels which is a ready mixed, aggregated coating which provides a rough anti-slip finish when dry to provide extra protection for crew-members while traversing the deck of a boat in motion or vessel in rough seas.

Price £17.01
In stock