Ennis-Flint MMAXGRIP PRMX 65 is a MMA-based coating that was developed specifically for application to public main roads and side streets as well as other traffic zones. Its special properties make MMAXGRIP PRMX 65 particularly suitable for surfaces where coloured road markings are required on main roads and side streets in urban areas and elsewhere.
Axalta Highway Anti-Skid Traffic Paint
Axalta Highway Anti-Skid Traffic Paint is a highly durable, fast drying, low-slip traffic paint based on a specially modified chlorinated rubber system. The coating is coloured with chemical and weather resistant pigments. developed as a traffic line / parking bay paint with low-slip properties, suitable for application to asphalt, concrete, block paving and some wooden floors.
Axalta Highway Anti-Skid Traffic Paint is a highly durable, fast drying, low-slip traffic paint based on a specially modified chlorinated rubber system, containing high quality, pre-dispersed aggregate. The coating is coloured with chemical and weather resistant pigments.
Axalta Highway Anti-Skid Traffic Paint has been developed as a traffic line / parking bay / road marking paint with low-slip properties, suitable for application to asphalt, concrete, block paving and some wooden floors.
- Recommended Film Thickness: 159µm WFT / 70µm DFT
- Theoretical Spreading Rate: 6.2m² per litre
- Application Method: Brush / Roller
Surfaces to be coated, inside or outside should be clean, dry and free oil, grease, laitance, dust and other contamination. Do not apply to damp surfaces or fresh concrete. Compatible with most surfaces as recommended, but due to the wide variety of substrates available, a small test area is recommended to confirm compatibility. Adhesion should be checked, test patches should be left for 7 days before assessment is made.
Usually sold as a single system - in most instances, apply 2 full coats.
- Do not apply when RH exceeds 85% or the surface is less than 3°C above dew point.
- Do not use on asphalt surfaces where cracks are visible.
- On asphalt, applications in excess of 150µm WFT per coat should be avoided, with a maximum of 2 coats applied.
- On coarse asphalt, it is essential that the pits are not filled with the coating.
- This product is subject to a 10 working day lead time and minimum order quantities.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
- Brush, Roller
- 6.2m² per litre
- Touch Dry
- 15 mins
Be the first to ask a question about this product!
Jotun Jota Armour WG is a Winter Grade version of the standard Jota Armour to allow faster curing in lower temperatures. It is a three component, abrasion resistant, polyamine cured epoxy coating specially designed as an anti-skid coating. Suitable for approved primers or directly on concrete substrates.
A one coat, hard wearing epoxy resin anti-slip coating for concrete, stone, metal and wood. Solvent-free and virtually odour-free, Rust-Oleum SuperGrip Treadsafe is finished with hard-wearing carborundum particles and will easily withstand heavy traffic including forklift trucks and harsh chemicals.
703 MMA Flexible Anti-Slip Coating is a fast curing, flexible coating for interior or exterior tarmac and asphalt surfaces enhanced by the incorporation of slip resistant aggregates premixed into the resin.
Sikafloor 264 N Thixo is a two part, economic, coloured epoxy resin textured roller and seal coat. This Sikafloor product is solvent free, thixothropic grade for high build textured and structured finishes.
Remmers PUR Grip 100 is a solvent free, flexible, three component, fast cure anti-skid system used as an anti-skid system onto various surfaces. It offers a degree of flexibility and can be used inside and out. Ideal for metal bridge decks, loading bays, pedestrian walkways, ramps and car parks, footpaths, roads and pavements, driveways,...
Sherwin-Williams Epidek M339 is a 3-pack epoxy high build anti-slip deck coating designed for spray application using suitable equipment as a high profile anti-slip deck paint. It may also be applied directly to suitable sound deck coatings.
Smartkote Protectakote WB Smooth is a water-based, smooth polyurethane coating. This water-based solvent-free formulation is weather resistant, has a low odour, and is non-flammable for both interior and exterior applications. It’s enhanced with polyurethane for ultimate toughness, with excellent resistance to abrasion, chemicals and solvents....
Blackfriar Professional Anti-Slip Floor Paint is suitable for concrete, cement, brickwork, masonry, wood, stone, and metal surfaces: Excellent slip-resistance Tough and durable coating Resists grease and oil Resists light foot traffic For interior/exterior use Ideal for light industrial, commercial and domestic floors Economic and...
501 Anti Slip Floor Paint is a ready mixed floor coating which creates a textured surface with excellent grip properties for foot and light truck traffic areas. Ideal anywhere anti slip properties are important providing durability, decoration and protection.
Coo-Var Suregrip Anti-Slip Floor Paint is a ready-mixed aggregated floor coating which provides a rough anti-slip finish to floors when dry. ADVANTAGES Durability Decoration Protection Interior/Exterior use Light truck traffic Available in 8 colours Can even be used as a high grip surface on climbing walls
Anti-slip marine coating specially made for the decks of sea faring vessels which is a ready mixed, aggregated coating which provides a rough anti-slip finish when dry to provide extra protection for crew-members while traversing the deck of a boat in motion or vessel in rough seas.
Resugrip is a high-build, pigment and solvent-free polyurethane floor binder for when anti-slip is essential. It is designed to be added to surface dressing with aggregates and is very hard-wearing. ADVANTAGES Good chemical resistance High bond strength Will cure at temperatures down to 5°C Coloured aggregates are available to make it decorative...
Ennis-Flint Stonegrip is a specialist, hand applied surface treatment, consisting of a thermosetting, modified epoxy resin binder, dressed with a decorative aggregate. A wide range of aggregates are available comprising of different colours and sizes.
Anglo Floor Paint Slip Resistant Grade dust proofs, seals and transforms drab concrete floors. It is easy to apply and dries quickly to a tough, mid-gloss finish and is ideal for slippery concrete floors, the anti slip aggregate is pre-blended with the paint to produce a more evenly textured finish.
Blackfriar Anti-Slip Step Paint is specially designed for steps, contains an aggregate that helps to reduce the risk of slipping, while providing an attractive hardwearing finish.