Smartkote Protectakote is a single component, ready-to-use, anti-slip coating with polyurethane performance for ultimate toughness. The course profile textured surface is ideal for interior floors, factory work-stations, walkways, stairs, ramps, vehicles and other areas where a flexible, durable and long lasting anti-slip surface is important....
Remmers PUR Grip 100
Remmers PUR Grip 100 is a solvent free, flexible, three component, fast cure anti-skid system used as an anti-skid system onto various surfaces. It offers a degree of flexibility and can be used inside and out. Ideal for metal bridge decks, loading bays, pedestrian walkways, ramps and car parks, footpaths, roads and pavements, driveways, balconies, decks and podiums.
Remmers PUR Grip 100 is a solvent free, flexible, three component, fast cure anti-skid system used as an anti-skid system onto various surfaces. It offers a degree of flexibility and can be used inside and out.
- Metal bridge decks
- Loading bays
- Pedestrian walkways
- Ramps and car parks
- Roads and pavements
- Decks and podiums
Features & Benefits
- Hard wearing
- Fast curing (can be accelerated)*
- Solvent free
- High strength binder
- Very good elasticity
- Very economic
- Resistant to fuels, oils
- Non hazardous materials
- Decorative aggregates can be used
*In some cases, particularly low temperatures, Accelerator Grip 100 may need to be added. See data sheet for details. DO NOT USE IN TEMPERATURES BELOW 5°C.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Be the first to ask a question about this product!
Smartkote Safekote is a ready-to-use polyurethane coating that provides an attractive, abrasion resistant anti-slip surface. The fine texture is provided by small silica particles which will not hurt bare feet, making it ideal for showers, change rooms, ablution blocks and other surfaces in environments such as hospitals, hotels or children’s...
A fibre modified concrete for backfilling around manhole frames and gullies and can also be used for surface repairs. HAPAS Approved since 2005 Shrinkage compensated Rapid set: 10-20 minutes 20N/mm² compressive Open to traffic: 90 minutes strength after 90 minutes
Resubind CP, a 3 component, non-pigmented, solvent-free polyurethane binder designed for car park decks, walkways and driveways, surface dressed with aggregates to create non-slip, hard wearing, textured floor finishes. Can be used in interior or exterior car park decks on a variety of substrates. Different aggregates can be used to create...
A one coat, hard wearing epoxy resin anti-slip coating for concrete, stone, metal and wood. Solvent-free and virtually odour-free, Rust-Oleum SuperGrip Treadsafe is finished with hard-wearing carborundum particles and will easily withstand heavy traffic including forklift trucks and harsh chemicals. Tough, long lasting finish Coarse...
Remmers Epoxy SIC Color is a textured, dissipative, hard grain coating that is conductive, provides slip-resistance, withstands mechanical/chemical loads and is physiologically harmless after curing.
Smartkote Protectakote UVR is a tough anti-slip aliphatic polyurethane coating, which forms a colour-fast, abrasion and weather resistant film. Protectakote UVR is single component, ready to use and easy to apply. Protectakote UVR is easy to apply and ideal to create anti-slip areas on exterior and interior surfaces.
502 HD Anti Slip Coating is applied by brush or roller in one thick, durable coat and it will provide a heavily textured finish incorporating an anti-slip aggregate which is dispersed within the material upon application. Each pack contains sufficient material to provide a slip resistant epoxy coating system to 5 square metres of surface.
Jotun Jota Armour WG is a Winter Grade version of the standard Jota Armour to allow faster curing in lower temperatures. It is a three component, abrasion resistant, polyamine cured epoxy coating specially designed as an anti-skid coating. Suitable for approved primers or directly on concrete substrates.
Blackfriar Anti-Slip Step Paint is specially designed for steps. It contains an aggregate that helps to reduce the risk of slipping, while providing an attractive hardwearing finish. Useful for areas that see a lot of footfall where safety is a concern. Product Features Anti-slip - added aggregate helps reduce slipping. Interior and...
Sherwin-Williams Epidek M339 is a 3-pack epoxy high build anti-slip deck coating designed for spray application using suitable equipment as a high profile anti-slip deck paint. It may also be applied directly to suitable sound deck coatings.
501 Anti Slip Floor Paint is a ready mixed floor coating which creates a textured surface with excellent grip properties for foot and light truck traffic areas. Ideal anywhere anti slip properties are important providing durability, decoration and protection.
Coo-Var Anti-Slip Acrylic Floor Paint is used to provide a durable and hard wearing surface with an anti-slip finish. This product has been independently tested and has a PTV rating of 68 in dry conditions and 58 in wet. UK law recommends on a minimum Pendulum Test Value on floors of 36 dry, wet or contaminated. Product Features Low...
Teamac Suregrip Deck Paint, is a modified alkyd, ready mixed, aggregated deck coating which provides a rough anti-slip finish when dry Suitable for: Foot traffic Light truck traffic Use on wood Use on metal Use on concrete Use on GRP Available in a range of colours Click to jump down to Technical Data
Epo-Flex FX (formerly known as Resuflor FX), a 3-part self-smoothing polyurethane modified epoxy resin floor finish designed for industrial use, providing a hard wearing gloss finish between 2.5 - 3 mm thickness, which has a degree of seamless flexibility. Recommended for use in buildings with plywood or chipboard floor substrates, retail...
Axalta Highway Anti-Skid Traffic Paint is a highly durable, fast drying, low-slip traffic paint based on a specially modified chlorinated rubber system. The coating is coloured with chemical and weather resistant pigments. developed as a traffic line / parking bay paint with low-slip properties, suitable for application to asphalt, concrete,...