Blackfriar Professional Anti-Slip Floor Paint is suitable for concrete, cement, brickwork, masonry, wood, stone, and metal surfaces: Excellent slip-resistance Tough and durable coating Resists grease and oil Resists light foot traffic For interior/exterior use Ideal for light industrial, commercial and domestic floors Economic and...
Anglo Floor Paint Slip Resistant Grade
Anglo Floor Paint Slip Resistant Grade dust proofs, seals and transforms drab concrete floors. It is easy to apply and dries quickly to a tough, mid-gloss finish and is ideal for slippery concrete floors, the anti slip aggregate is pre-blended with the paint to produce a more evenly textured finish.
Anglo Floor Paint Slip Resistant Grade dust proofs, seals and transforms drab concrete floors. It is easy to apply and dries quickly to a tough, mid-gloss finish. Anglo Floor Paint Slip Resistant Grade is ideal for slippery concrete floors, the anti slip aggregate is pre-blended with the paint to produce a more evenly textured finish. The texture is easier to clean than ‘gritty’ coatings making it particularly suitable for larger areas.
Features & Benefits
- Single pack polyurethane formulation
- No primer required
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
- Typical Coverage (per coat)
- 8m² per litre
- Touch Dry
- 12 hours
- Brush, Roller
Be the first to ask a question about this product!
Remmers PUR Grip 100 is a solvent free, flexible, three component, fast cure anti-skid system used as an anti-skid system onto various surfaces. It offers a degree of flexibility and can be used inside and out. Ideal for metal bridge decks, loading bays, pedestrian walkways, ramps and car parks, footpaths, roads and pavements, driveways,...
502 HD Anti Slip Coating is applied by brush or roller in one thick, durable coat and it will provide a heavily textured finish incorporating an anti-slip aggregate which is dispersed within the material upon application. Each pack contains sufficient material to provide a slip resistant epoxy coating system to 5 square metres of surface.
Jotun Jota Armour is a three component, abrasion resistant, polyamine cured epoxy coating specially designed as an anti-skid coating. Suitable for approved primers or directly on concrete substrates - such as helidecks, walkways, ramps, weigh bridge decks, decks in general where abrasion resistance and non-slip properties are required.
Resugrip is a high-build, pigment and solvent-free polyurethane floor binder for when anti-slip is essential. It is designed to be added to surface dressing with aggregates and is very hard-wearing. ADVANTAGES Good chemical resistance High bond strength Will cure at temperatures down to 5°C Coloured aggregates are available to make it decorative...
Smartkote Protectakote UVR is a tough anti-slip aliphatic polyurethane coating, which forms a colour-fast, abrasion and weather resistant film. Protectakote UVR is single component, ready to use and easy to apply. Protectakote UVR is easy to apply and ideal to create anti-slip areas on exterior and interior surfaces.
Smartkote Protectakote is a single component, ready-to-use, anti-slip coating with polyurethane performance for ultimate toughness. The course profile textured surface is ideal for interior floors, factory work-stations, walkways, stairs, ramps, vehicles and other areas where a flexible, durable and long lasting anti-slip surface is important....
Smartkote Safekote is a ready-to-use polyurethane coating that provides an attractive, abrasion resistant anti-slip surface. The fine texture is provided by small silica particles which will not hurt bare feet, making it ideal for showers, change rooms, ablution blocks and other surfaces in environments such as hospitals, hotels or children’s...
Smartkote Protectakote WB Smooth is a water-based, smooth polyurethane coating. This water-based solvent-free formulation is weather resistant, has a low odour, and is non-flammable for both interior and exterior applications. It’s enhanced with polyurethane for ultimate toughness, with excellent resistance to abrasion, chemicals and solvents....
506 Anti Slip Dressing is sold in 10m² packs with each contain a flexible binding resin and decorative aggregate to create a 'stone carpet' finish which gives the appearance of loose aggregate, but avoids maintenance problems. Primarily used on outdoor walkways and concourse areas but can also be used internally to reflect the natural beauty of the outdoors.
501 Anti Slip Floor Paint is a ready mixed floor coating which creates a textured surface with excellent grip properties for foot and light truck traffic areas. Ideal anywhere anti slip properties are important providing durability, decoration and protection.
Ennis-Flint MMAXGrip PRMX 45 is designed as a versatile MMA coating for application to bituminous substrates, possesses excellent abrasion-resistance and non-skid properties and was developed specifically as a heavy-duty surfacing and can be applied to asphalt substrates without a primer. The product is used as a priming surfacer, a topping layer and...
Nu-Base SP Floor Finish is a fast-drying floor paint for protecting flooring substrates from mild chemicals and solvents, whilst giving an excellent decorative appearance. Advantages Fast-drying Standard or non-slip versions Available in all RAL colours Interior and exterior use Fast-drying 12-month shelf life
Coo-Var Anti-Slip Acrylic Floor Paint is used to provide a durable and hard-wearing surface with an anti-slip finish. ADVANTAGES Internal/external use Low odour Fast drying Water-based 68 PTV rating in dry 58 PTV rating in wet
Coo-Var Suregrip Anti-Slip Floor Paint is a ready-mixed aggregated floor coating which provides a rough anti-slip finish to floors when dry. ADVANTAGES Durability Decoration Protection Interior/Exterior use Light truck traffic Available in 8 colours Can even be used as a high grip surface on climbing walls
Sikafloor 264 N Thixo is a two part, economic, coloured epoxy resin textured roller and seal coat. This Sikafloor product is solvent free, thixothropic grade for high build textured and structured finishes.