Anti-Slip Stair Nosings
Manufacturer: Rawlins Paints
Anti Slip Stair Nosings are easy to fit and help highlight the hazardous leading edge area of the step. This is the ideal product if you are looking for an affordable solution to minimise the risk of slips, trips, and falls in the workplace or in your own garden. Not only does stair nosing add an extra anti-slip surface underfoot, but it also highlights attention to the edge of a stair.
Anti Slip Stair Nosings are easy to fit and help highlight the hazardous leading edge area of the step. This is the ideal product if you are looking for an affordable solution to minimise the risk of slips, trips, and falls in the workplace or in your own garden. Not only does stair nosing add an extra anti-slip surface underfoot, but it also highlights attention to the edge of a stair - which can often be missed in low lighting, particularly outdoors or in a poorly lit stairwell.
Luminous Stair Nosings (only available in the 55x55mm size) provide a highly visible yellow colour in normal light and produces a long lasting luminous glow in low light. Gives an effective contrast to the background and highlights the leading edge of the step to ensure good visibity in an emergency when lighting is poor.
- Use on timber, concrete or metal stairs/steps.
- Easy install, simply glue and screw to the existing substrate.
- Gritted surface provides exceptional slip resistance, BS7976 - 2 tested.
- Manufactured from corrosion resistant GRP.
- Reduces trip hazard risk and allows a flush fit with existing substrate.
- Safety yellow, white, black, beige and luminous available to provide an effective colour contrast in accordance with DDA Legislation.
Our Anti Slip Stair Nosing is manufactured from premium grade slip resistant fiberglass to maximise quality; durability and lifespan and can be cut to any size. Simply glue and screw your stair nosing to Timber, Concrete, Chequer Plate steps or stairs.
Features & Benefits
- High Strength
- Low Maintenance
- Fire retardant
- Corrosive resistant
- UV stable
- Chemical resistant
A hard-wearing Silicon Carbide Grit is applied to the top surface to provide an effective anti-slip finish, which outperforms conventional aluminium or rubber material in terms of slip resistance.
Quality Assurance: Manufactured in accordance with ISO 9001 accredited Quality Management System, the structural integrity of the specified material is high grade. A suggested life span of 25 years is expected, but not guaranteed, and is based on a number of variables: environmental, installation process, maintenance, loading and traffic conditions.
Slip Resistance: The integral angular quartz gritted surface has been tested and certified in accordance with BS 7976-2. It provides an exceptional level of slip resistance over its lifespan. Lifespan depends on frequency of use.
Chemical Resistance: Fibreglass products are resistant to a wide range of chemicals across a broad temperature spectrum. GRP is made using a number of different resins to achieve specific chemical resistant properties. Please refer to chemical resistance charts at the end of data sheet.
Fire Resistance: All products contain a Fire Resistant Additive resulting in a Euro Class 1 fire rating in accordance with ISO 9239-1 and ISO 11925-2. This performance is equivalent to ASTM E84 class 1 and BS 476 part 7 class 2 flame spread and in effect gives a 25 minute burn time on the material.
|Voltage breakdown||18K volts/mm|
|Density kg/m³||2100||BS 476|
|Thermal Expansion Factor||13 x 10-6 mm/mm°C|
|Water Absorption rate||0.45 x 24hrs||ASTM D570|
|Operating Temperature||-100°C to + 200°C||BS 476|
Anti Slip Stair Nosings are available in Black, White, Yellow, Beige, Grey and Luminous. They are available in either 55mm or 70mm depth to tread on and a 55mm nosing returning down the tread riser, they are made from 4mm thick GRP with a chamfered leading edge to reduce potential trips and the following lengths are available;
If one of the above sizes does not suit your requirements we offer a free cutting service which allows us to cut the length of each nosing for you at no extra cost.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
|Nathan Pegg on 08/12/2018|
Can this product be cut on site? Also what's best to use to cut it?
Yes - if any localised trimming/cutting is required, we recommend the use of a Jigsaw, preferably fitted with a tungsten carbide blade (Bosch T141 HM or similar) or suitable hacksaw or grinder – with a stone or diamond cutting disc. The operative should ensure he is wearing appropriate P.P.E. and uses cutting equipment in a safe manner. Care should be taken to select a safe area for cutting and ensure the safety of others. A suitable bench should be used. It is best to cut the sheet face side up. Standard marking and cutting procedures should be employed. All waste material should be disposed of using duly appointed receptacles.
|Brenda swain on 04/12/2018|
Hi is your stair nosing suitable for a commercial kitchen regards brenda
|Jane Craven on 15/05/2017|
Question: 1. Do you deliver to France?
2. Is it possible to order 5 stair nosings at 600x55x55 please?
I'm afraid we don't export but if you wish you could arrange your own collection.
|Brian Gunn on 18/05/2016|
Question: Does this product work with Durbar galvanised steel plate that has a raised profile
I need something to highlight step edges but not create a trip hazard due to the raised profile of the steel plate.
Yes our 1101 Anti-Slip Stair Nosings can be used on these type of steps, we would recommend fixing with our Self Drilling Screws for metal and our 1106 Clear Adhesive. We can post free of charge samples of this product for you to see before purchase also, just contact our Sales Team on 0113 2455450 or [email protected]
|Kathryn on 23/08/2015|
Are 1101 Anti-Slip Stair Nosings (55 x 55mm) suitable for external use?
Absolutely - on stone, concrete, timber or metal steps.
Colour reproduction of the Products on the Site is limited by the technology used to deliver web pages and by the colour representation of Customer’s own monitor and computer set-up. We have made every effort to display as accurately as possible the colours of our Products but we cannot guarantee that the colour shown on Customer’s monitor’s display will accurately reflect the colour of the Product on delivery. We recommend that Customer first purchases the smallest Product available or access an industry standard colour chart in person (and not digitally) to ensure that the colour is acceptable for its purposes. For more information, please see our Terms & Conditions of Sale.Close