1108 Anti-Slip Luminous Stair Nosings (55 x 55mm)
Condition: New product
Manufacturer: Rawlins Paints
A range of ultra hard-wearing stair edge nosings to provide an effective anti-slip surface to the most vulnerable area of the step in little or no light. Provides a highly visible yellow colour in normal light and produces a long lasting luminous glow in low light.
1108 Anti-Slip Luminous Stair Nosings are a range of ultra hard-wearing stair edge nosings to provide an effective anti-slip surface to the most vulnerable area of the step in little or no light. Provides a highly visible yellow colour in normal light and produces a long lasting luminous glow in low light. Gives an effective contrast to the background and highlights the leading edge of the step to ensure good visibity in an emergency when lighting is poor.
Features & Benefits
- Simply glue & screw to the existing substrate.
- Can help to quickly reinstate damaged stair edges.
- Gritted surface provides exceptional slip resistance, BS7976 - 2 Certified (Co-Efficient of Friction Test).
- Manufactured from corrosion resistant glass reinforced plastic (GRP).
- Chamfered edge to reduce trip hazard risk & allows a flush fit with existing substrate.
1108 Anti-Slip Luminous Stair Nosings have 55mm to tread on and 55mm returning down the tread riser, they are chamfered on the back edge and are made from 4mm thick GRP. The following lengths are available;
- 750mm x 55mm x 55mm
- 1000mm x 55mm x 55mm
- 1500mm x 55mm x 55mm
- 2000mm x 55mm x 55mm
- 2500mm x 55mm x 55mm
- 3000mm x 55mm x 55mm
If one of the above sizes does not suit your requirements we offer a free cutting service to enable you to buy the exact dimensions you need at no extra cost.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
|Frances du Corbier on 15/12/2017|
Question: How do Ito fit this product?
There is an installation guide available to download from the 'DATASHEETS' tab on the product page.
Colour reproduction of the Products on the Site is limited by the technology used to deliver web pages and by the colour representation of Customer’s own monitor and computer set-up. We have made every effort to display as accurately as possible the colours of our Products but we cannot guarantee that the colour shown on Customer’s monitor’s display will accurately reflect the colour of the Product on delivery. We recommend that Customer first purchases the smallest Product available or access an industry standard colour chart in person (and not digitally) to ensure that the colour is acceptable for its purposes. For more information, please see our Terms & Conditions of Sale.Close