Stair Riser Plates by Rawlins Paints are designed to complement our Anti-Slip Stair Tread Covers, to be installed to the rise of the stair case, and allow the concealment of worn or scruffy concrete, or simply to prevent objects falling through the open area of steel or timber staircases.
Simply glue & screw to the existing substrate
Quickly rejuvenates or infills stair risers
Manufactured from 4mm thick corrosion resistant glass reinforced plastic (GRP)
Stair Riser Plates by Rawlins Paints are designed to complement our Anti-Slip Stair Tread Covers, to be installed to the rise of the stair case. The product helps to conceal worn or scruffy concrete, or simply to prevent objects falling through the open area of steel or timber staircases.
Stair Riser Plates are made from 4mm thick GRP and are available in Beige, Grey, Yellow or Black in the following sizes;
145mm high x 1220mm wide
145mm high x 2000mm wide
145mm high x 2440mm wide
If one of the above sizes does not suit your requirements we offer a free cutting service to enable you to buy the exact dimensions you need at no extra cost. Please consult our Technical Department on 0113 2455450 (option 2) or send a message to [email protected]</a
For specific advice regarding any aspect of this product, please consult our Technical Department on 0113 2455450 (option 2) or send a message to [email protected]
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Anti-Slip Stair Tread Covers from Rawlins Paints are designed to cover the entire stair and provide a firmer grip underfoot. Our Anti-Slip Stair Tread Covers work well in wet, icy or greasy conditions and can transform tired looking staircases whilst minimising the risk of slips, trips, and falls.
Designed for easy installation onto...
Illbruck PU230 Rapid Adhesive is a PU adhesive paste for wood which cures rapidly to form an exceptionally strong water resistant bond. It is ideal for use in all types of joinery, construction and repair applications where a permanent bond is required.
Waterproof adhesive suitable for external use - meets the requirements of EN 204 (D4)...
Recommended to fix our anti-slip GRP products to metal substrates in conjunction with Illbruck PU230 Rapid Adhesive. Easy to use, self drilling screws mean installation time is kept to a minimum.
Recommended to fix our anti-slip GRP products to timber and concrete substrates in conjunction with Illbruck PU230 Rapid Adhesive. Corrosion resistant stainless steel makes them ideal for indoor or outdoor use.
Pre-Drilling & Countersinking: Our warehouse can pre-drill and countersink holes in your anti-slip GRP prior to despatch to your specifications to ensure a uniform, professional appearance is achieved, and installation time and labour is reduced.
Ensures a uniform, professional appearance
Installation time and labour is reduced
4.8mm...
