Anti-Slip Flat Plate is a range of low profile 4mm thick, anti-slip sheeting suitable for installation onto existing concrete, timber or steel substrates. These plates provide and extremely cost effective solution and help rejuvenate worn, slippery and tired walkways, access ramps, gangways, bridges and industrial floors internally or externally.
Anti-Slip Flat Plate is a range of low profile 4mm thick, anti-slip sheeting suitable for installation onto existing concrete, timber or steel substrates. These plates provide and extremely cost effective solution and help rejuvenate worn, slippery and tired walkways, access ramps, gangways, bridges and industrial floors internally or externally.
The Quartzgrip™ DDA compliant Anti-Slip Flat Plate is manufactured from premium grade, corrosion resistant Glass Reinforced Plastic (Fibreglass) to maximise quality, durability, and lifespan and can be cut to any size. Designed for easy installation onto existing concrete, timber or steel.
The following products/services are recommended for installation:
Quality Assurance: Manufactured in accordance with ISO 9001 accredited Quality Management System, the structuralintegrity of the specified material is high grade. A suggested life span of 25 years is expected, but not guaranteed, and is based on a number of variables: environmental, installation process, maintenance, loading and traffic conditions.
Slip Resistance: The integral angular quartz gritted surface has been tested and certified in accordance with BS 7976-2. It provides an exceptional level of slip resistance over its lifespan. Lifespan depends on frequency of use.
Chemical Resistance: Fibreglass products are resistant to a wide range of chemicals across a broad temperature spectrum. GRP is made using a number of different resins to achieve specific chemical resistant properties. Please refer to chemical resistance charts at the end of data sheet.
Fire Resistance: All products contain a Fire Resistant Additive resulting in a Euro Class 1 fire rating in accordance with ISO 9239-1 and ISO 11925-2. This performance is equivalent to ASTM E84 class 1 and BS 476 part 7 class 2 flame spread and in effect gives a 25 minute burn time on the material.
GRP Characteristics
Unit
Reference
Voltage breakdown
18K volts/mm
ASTM D149
Density kg/m³
2100
BS 476
Thermal Expansion Factor
13 x 10-6 mm/mm°C
Water Absorption rate
0.45 x 24hrs
ASTM D570
Operating Temperature
-100°C to + 200°C
BS 476
Anti-Slip Flat Plate is available in Black, Yellow, Beige or Grey and made from 4mm thick GRP and is available in the following sizes;
1220mm x 1220mm
2000mm x 1000mm
2440mm x 1220mm
In addition the below size is available in Black only:
3000mm x 1220mm
If one of the above sizes does not suit your requirements we offer a free cutting service to enable you to buy the exact dimensions you need at no extra cost.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
This product is temporarily unavailable; in the meantime, our technical team recommend Adesco Hi-Tack Bonding Adhesive as a great alternative.
Please note: it is important to check that any alternative product is suitable for your requirements, as our suggestion is given in good faith but without warranty. If you are in any doubt please...
Box of 100 Self Drilling Screws (For metal) are recommended to fix our anti-slip GRP products to metal substrates in conjunction with Illbruck PU230 Rapid Adhesive.
Easy to use
Self-drilling screws
Installation time is kept to a minimum
More Information Delivery Info
Box of 100 Screws & Plugs (for wood & concrete) are recommended to fix our anti-slip GRP products to timber and concrete substrates in conjunction with Illbruck PU230 Rapid Adhesive.
Corrosion resistant stainless steel
Ideal for indoor or outdoor use
More Information Delivery Info
Pre-Drilling & Countersinking: Our warehouse can pre-drill and countersink holes in your anti-slip GRP prior to despatch to your specifications to ensure a uniform, professional appearance is achieved, and installation time and labour is reduced.
Ensures a uniform, professional appearance
Installation time and labour is reduced
4.8mm...
