Anti-Slip Decking Strips
Manufacturer: Rawlins Paints
Anti-Slip Decking Strips provide an easy to install solution that gives timber a non-slip, weatherproof surface. Tough & resilient against extreme weather conditions, these strips are designed to overcome environmental causes of slippery wooden areas such as water, moss, algae & mould. Ideal for use in garden decking, family picnic areas, walkways, pontoons, terraces, promenades, and boardwalks.
Anti-Slip Decking Strips provide an easy to install solution that gives timber a non-slip and weatherproof surface. Tough and resilient against extreme weather conditions, these strips are designed to overcome environmental causes of slippery wooden areas such as water, moss, algae & mould. Anti-Slip Decking Strips provide a firmer grip underfoot and work well in wet, icy or greasy conditions and can transform tired looking decking areas whilst minimising the risk of slips, trips, and falls.
All decking strips come with pre-drilled and countersunk holes for fixing and screws to suit FREE!
- Designed to fit directly onto existing timber decking.
- Unique chamfered edge ensures a low profile fit, reducing the trip hazard.
- Decking Strips are available in 50mm and 100mm widths.
- Lengths stocked up to 3.6m.
- Pre-Drilling of fixing holes available.
- Free cutting service
The Quartzgrip™ DDA compliant Anti-Slip Decking Strips are manufactured from premium grade, corrosion resistant Glass Reinforced Plastic (Fibreglass) to maximise quality, durability, and lifespan and can be cut to any size. Designed for easy installation onto timber, we strongly suggest you glue and screw this product in place.
Features & Benefits
- High Strength
- Low Maintenance
- Fire retardant
- Corrosive resistant
- UV stable
- Chemical resistant
|Decking Strip Length||No. of Holes|
The 100mm strips use the same format as above but have 2 rows instead of 1.
Quality Assurance: Manufactured in accordance with ISO 9001 accredited Quality Management System, the structural integrity of the specified material is high grade. A suggested life span of 25 years is expected, but not guaranteed, and is based on a number of variables: environmental, installation process, maintenance, loading and traffic conditions.
Slip Resistance: The integral angular quartz gritted surface has been tested and certified in accordance with BS 7976-2. It provides an exceptional level of slip resistance over its lifespan. Lifespan depends on frequency of use.
Chemical Resistance: Fibreglass products are resistant to a wide range of chemicals across a broad temperature spectrum. GRP is made using a number of different resins to achieve specific chemical resistant properties. Please refer to chemical resistance charts at the end of data sheet.
Fire Resistance: All products contain a Fire Resistant Additive resulting in a Euro Class 1 fire rating in accordance with ISO 9239-1 and ISO 11925-2. This performance is equivalent to ASTM E84 class 1 and BS 476 part 7 class 2 flame spread and in effect gives a 25 minute burn time on the material.
Anti-Slip Decking Strips are available in Black, Brown, Yellow, Beige, Grey, and Green in 50mm or 100mm widths. 4mm thick and chamfered on either side, they are available in the following lengths;
If one of the above sizes does not suit your requirements we offer a free cutting service to enable you to buy the exact dimensions you need at no extra cost.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
|Christine McColl on 23/09/2016|
Question: Is glue supplied with the non strip strips?
If not - how much is the glue and what type do l need to buy?
|Margaret on 24/12/2015|
How far apart do your 1105 Anti-Slip Convex Decking Strips (50mm) need to be fixed?
There is no set measurement as decking areas can be different project to project. As a guide we suggest you make sure you place the decking strips so people can't tread between them, a rough guide would be 75-100mm apart centre to centre.
Colour reproduction of the Products on the Site is limited by the technology used to deliver web pages and by the colour representation of Customer’s own monitor and computer set-up. We have made every effort to display as accurately as possible the colours of our Products but we cannot guarantee that the colour shown on Customer’s monitor’s display will accurately reflect the colour of the Product on delivery. We recommend that Customer first purchases the smallest Product available or access an industry standard colour chart in person (and not digitally) to ensure that the colour is acceptable for its purposes. For more information, please see our Terms & Conditions of Sale.Close