Anti-Slip Decking Strips provide an easy to install solution that gives timber a non-slip and weatherproof surface. Tough and resilient against extreme weather conditions, these strips are designed to overcome environmental causes of slippery wooden areas such as water, moss, algae & mould. Anti-Slip Decking Strips provide a firmer grip underfoot and work well in wet, icy or greasy conditions and can transform tired looking decking areas whilst minimising the risk of slips, trips, and falls.
All decking strips come with pre-drilled and countersunk holes for fixing and screws to suit FREE!
- Designed to fit directly onto existing timber decking.
- Unique chamfered edge ensures a low profile fit, reducing the trip hazard.
- Decking Strips are available in 50mm and 100mm widths.
- Lengths stocked up to 3.6m.
- Pre-Drilling of fixing holes available.
- Free cutting service
- Illbruck PU230 Rapid Adhesive is recommended for use during installation
The Quartzgrip™ DDA compliant Anti-Slip Decking Strips are manufactured from premium grade, corrosion resistant Glass Reinforced Plastic (Fibreglass) to maximise quality, durability, and lifespan and can be cut to any size. Designed for easy installation onto timber, we strongly suggest you glue and screw this product in place.
Features & Benefits
- Anti-slip
- High Strength
- Low Maintenance
- Fire retardant
- Corrosive resistant
- UV stable
- Chemical resistant
- Anti-static
Drilling Guide;
Decking Strip Length |
No. of Holes |
750mm |
5 |
1000mm |
6 |
1500mm |
8 |
2000mm |
11 |
2500mm |
13 |
3000mm |
15 |
3600mm |
18 |
The 100mm strips use the same format as above but have 2 rows instead of 1.
Material Characteristics
Quality Assurance: Manufactured in accordance with ISO 9001 accredited Quality Management System, the structural integrity of the specified material is high grade. A suggested life span of 25 years is expected, but not guaranteed, and is based on a number of variables: environmental, installation process, maintenance, loading and traffic conditions.
Slip Resistance: The integral angular quartz gritted surface has been tested and certified in accordance with BS 7976-2. It provides an exceptional level of slip resistance over its lifespan. Lifespan depends on frequency of use.
Chemical Resistance: Fibreglass products are resistant to a wide range of chemicals across a broad temperature spectrum. GRP is made using a number of different resins to achieve specific chemical resistant properties. Please refer to chemical resistance charts at the end of data sheet.
Fire Resistance: All products contain a Fire Resistant Additive resulting in a Euro Class 1 fire rating in accordance with ISO 9239-1 and ISO 11925-2. This performance is equivalent to ASTM E84 class 1 and BS 476 part 7 class 2 flame spread and in effect gives a 25 minute burn time on the material.
Sizes
Anti-Slip Decking Strips are available in Black, Brown, Yellow, Beige, Grey, and Green in 50mm or 100mm widths. 4mm thick and chamfered on either side, they are available in the following lengths;
- 750mm
- 1000mm
- 1500mm
- 2000mm
- 2500mm
- 3000mm
- 3600mm
If one of the above sizes does not suit your requirements we offer a free cutting service to enable you to buy the exact dimensions you need at no extra cost.