Anti-Slip Infill Decking Strips are specifically designed to be fit into timber decking boards that have been rebated to accommodate the depth and width of the strip. Tough and resilient against extreme weather conditions, these strips are designed to overcome environmental causes of slippery wooden areas such as water, moss, algae & mould.
Designed to fit into rebated decking boards.
Sits flush with the surface, reducing the trip hazard.
Decking Strips are available in 50mm and 100mm widths.
Anti-Slip Infill Decking Strips are specifically designed to be fit into timber decking boards that have been rebated to accommodate the depth and width of the strip.
Once installed Anti-Slip Infill Decking Strips are tough and resilient against extreme weather conditions, these strips are designed to overcome environmental causes of slippery wooden areas such as water, moss, algae & mould. They provide a firmer grip underfoot and work well in wet, icy or greasy conditions whilst minimising the risk of slips, trips, and falls.
Designed to fit into rebated decking boards.
Sits flush with the surface, reducing the trip hazard.
Decking Strips are available in 50mm and 100mm widths.
Lengths stocked up to 2440mm.
Pre-Drilling of fixing holes available.
Free cutting service
The Quartzgrip™ Anti-Slip Infill Decking Strips are manufactured from premium grade, corrosion resistant Glass Reinforced Plastic (Fibreglass) to maximise quality, durability, and lifespan and can be cut to any size. We strongly suggest you glue and screw this product in place.
The following products/services are recommended for installation:
Quality Assurance: Manufactured in accordance with ISO 9001 accredited Quality Management System, the structural integrity of the specified material is high grade. A suggested life span of 25 years is expected, but not guaranteed, and is based on a number of variables: environmental, installation process, maintenance, loading and traffic conditions.
Slip Resistance: The integral angular quartz gritted surface has been tested and certified in accordance with BS 7976-2. It provides an exceptional level of slip resistance over its lifespan. Lifespan depends on frequency of use.
Chemical Resistance: Fibreglass products are resistant to a wide range of chemicals across a broad temperature spectrum. GRP is made using a number of different resins to achieve specific chemical resistant properties. Please refer to chemical resistance charts at the end of data sheet.
Fire Resistance: All products contain a Fire Resistant Additive resulting in a Euro Class 1 fire rating in accordance with ISO 9239-1 and ISO 11925-2. This performance is equivalent to ASTM E84 class 1 and BS 476 part 7 class 2 flame spread and in effect gives a 25 minute burn time on the material.
Sizes
Anti-Slip Infill Decking Strips are available in Black, Yellow and Beige in 50mm or 100mm widths. At 4mm thick they are available in the following lengths;
1000mm
2000mm
2440mm
If one of the above sizes does not suit your requirements we offer a free cutting service to enable you to buy the exact dimensions you need at no extra cost.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Can the anti-slip strips be painted? If so, which paint would you recommend? Thanks
Answer from Rawlins’ Technical Team:
Yes they can be painted, but care should be taken to not apply so much paint that it compromises the level of slip resistance.
Assuming the strips are clean, dry, sound and prepared as detailed in the technical data sheet we can recommend Smartkote Protectakote UVR Smooth.
This is available in clear and a range of colours.
Leigh on 2019-05-09 17:05:33
Question:
Hi, please could you tell me if screws are provided. Many Thanks
Answer from Rawlins’ Technical Team:
Our Anti-Slip Decking Strips come pre-drilled with screws free of charge. Anti-Slip Infill Decking Strips do not, so screws and/or pre-drilling would need to be purchased additionally.
Anti-Slip Infill Decking Strips is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
This product is temporarily unavailable; in the meantime, our technical team recommend Adesco Hi-Tack Bonding Adhesive as a great alternative.
Please note: it is important to check that any alternative product is suitable for your requirements, as our suggestion is given in good faith but without warranty. If you are in any doubt please...
Box of 100 Self Drilling Screws (For metal) are recommended to fix our anti-slip GRP products to metal substrates in conjunction with Illbruck PU230 Rapid Adhesive.
Easy to use
Self-drilling screws
Installation time is kept to a minimum
More Information Delivery Info
Box of 100 Screws & Plugs (for wood & concrete) are recommended to fix our anti-slip GRP products to timber and concrete substrates in conjunction with Illbruck PU230 Rapid Adhesive.
Corrosion resistant stainless steel
Ideal for indoor or outdoor use
More Information Delivery Info
Pre-Drilling & Countersinking: Our warehouse can pre-drill and countersink holes in your anti-slip GRP prior to despatch to your specifications to ensure a uniform, professional appearance is achieved, and installation time and labour is reduced.
Ensures a uniform, professional appearance
Installation time and labour is reduced
4.8mm...
Rebecca Snowden on 2022-02-07 14:21:36
