Heskins Conformable Safety-Grip Anti-Slip Tape

    H3406
    HES4036

    Heskins Conformable Safety Grip, a self adhesive anti slip tape covering for irregular surfaces such as durbar plate, chequer plate and diamond tread often seen in fire exits, walkways, access platforms, etc, providing excellent grip even in wet or dirty conditions.

    • Non slip tape for steps on irregular metal treads
    • Diamond hard mineral (9 on the MOHS scale)
    • Foil backing provides Class 0 fire retardant
    • R118 approved
    • Custom shapes, sizes and cuts can be made to order in most RAL colours
      • Give our sales team an email or a call on 0113 2455450 to discuss your requirements.
    • Ensure to read the Application Guide, downloadable from the "Data Sheets" tab, before purchase and application

    Colour
    Pick a Colour
    • Current colour: Black
    Close colour picker
    • White
    • Black
    • RAL1023 - Traffic Yellow
    • Orange
    • Hazard Black/Yellow
    Size
    £17.60(ex. VAT)
    £21.11 (inc. VAT)
    Quantity
    Please choose your colour
    Available for Delivery (See Delivery Options Below)

    Description

    Heskins Conformable Safety-Grip non slip tape for steps provides extra grip on metal treads such as durbar plate, chequer plate and diamond tread which, despite their design, can actually be slippery to walk on. Given that these metal treads are often used for fire exits, walkways, access platforms, etc., it is crucial that these surfaces are safe for foot traffic. The self adhesive anti slip tape has been used effectively on access stairs on cruise vessels and ferries, which are made from steel durbar plate. The raised surfaces, which are supposed to provide grip, actually reduce the surface area, making steps and stairs slippery.

    Heskins Conformable Safety-Grip has a soft aluminium foil backing that shapes itself around metal treads, whereas a plastic-backed grip would try to revert to its original state. This has been effective installations at power plants which traditionally have lots of treaded steps and stairs, requiring grip tapes with anti-fire backing since the risk of fire is so high. One additional benefit of Conformable Safety-Grip being constructed using a foil instead of plastic base is that this gives it high flame retardancy levels. Conformable safety-grip tape has been tested and certified to CAA FAA specification 8 for use within cockpit areas, for more information please contact our technical sales team.

    The upper surface is a conventional abrasive which has exceptionally high grip levels (coefficient of friction), even in wet or dirty conditions. The diamond hard mineral that Heskins uses (9 on the MOHS scale) ensures that good grip is obtained.

    The Safety Grip range is available in many colours, including Transparent, on rolls as well as pre-made shapes; more sizes (widths up to 980mm) and custom cuts and shapes can be made to order in most RAL colours - contact our sales team by email or on 0113 2455450.

    Available Colours
    H3406N - Black
    H3406W - White
    H3406Y - Yellow (RAL 1023)
    H3406O - Orange
    H3406 - Black/Yellow Hazard

    Ordering References

    Colours - Available on 18.3m rolls in widths from 25mm wide to 950mm, or as a 150mm x 610mm strip.

    Hazard - Available on 18.3m rolls in widths from 25mm wide to 450mm, or as a 150mm x 610mm strip.

    For unstable surfaces, such as sodden timber, flaking or saturated concrete, etc, Heskins Safety-Grip Bolt Down Plates screw into place for a sound and safe anti-slip thread.

    See the Heskins range of accessories for additional help during application, pro-longing the life of anti-slip tapes and line markings. The range consists of primers, edge fixing, mallets, rollers etc.



    Features & Benefits


    • Provides grip on irregular surfaces
    • Ideal for use on durbar plate, chequer plate and diamond tread
      • Surfaces often seen in fire exits, walkways, access platforms, etc.
    • Diamond hard mineral (9 on the MOHS scale)
    • Foil backing provides Class 0 fire retardant
    • R118 approved
    • Ensures excellent grip, even in wet or dirty conditions
    • Custom shapes, sizes and cuts can be made to order in most RAL colours
      • Give our sales team an email or a call on 0113 2455450 to discuss your requirements.



    Safety Data & Test Results


    SubjectResultTest method
    Back carrierSoft Aluminum 0.075mmMeasuring Stick
    Total applied thickness1.12mmCalliper Method
    Type of adhesiveSolvent AcrylicN/A
    Peel Adhesion N/25mm17.7180˚ FINAT FTM1
    Tensile Strength, N/25mm148.63Lloyd, 500N load cell
    Mineral typeAluminium OxidN/A
    Adhesion to Steel (g/25.4mm²)2000↑PSTC-4
    Temperature Range-30ºC to +160ºCSee notes below

    The above tests were conducted in accordance with ASTM C 1028-96, the tests were conducted in a recognized independent friction testing laboratory, and copy certificates are available upon request. ASTM C 1028-96 is a static test, for the dynamic test results are available that are done via a pendulum with a four-S rubber slider© 

    Coefficient of Friction Data
    Safety-Grip®Dry Surface Test ResultWet Surface Test Result
    Standard1.140.98



    R118 approved


    This is a test to determine “the burning behaviour and/or the capability to repel fuel or lubricant of materials used in the construction of M3 category vehicles classified II or III.”

    Heskins Safety Grip was put through 3 out of the 5 tests that are in the R118 regulation (not all are required to pass). As detailed on the R118 certification, the material was subjected to Annexe 6, 7 and 8.

    Product Details
    4036-767459

    Data sheet

    For Use By
    Consumer Use
    Single, Two or Three Pack
    Single
    Maximum Applied Thickness
    1.12mm (Calliper Method)
    Tensile Strength
    148.63 (N/25mm)
    Max. Application Temperature
    +160ºC
    Min. Application Temperature
    -30ºC
    Coefficient of Friction (Dry)
    1.14
    Coefficient of Friction (Wet)
    0.98
    Suitable For Use On
    Metal
    Suitable For Use On
    Floors
    Finish
    Anti-Slip
    Application Method
    Self-Adhesive
    Product Usage Type
    Tape
    Colour Family
    Black
    Colour Family
    Yellow
    Colour Family
    White
    Colour Family
    Orange
    Product Type
    Conformable
    Attachments
    Download


    Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


    questions Tina Weston on 2019-12-22 18:43:32
    Question: 

    Hi, I want to wrap this tape (in white) around a shower grab rail which is a bit slippy. It is mounted vertically and has vertical ribbing for grip (hence conformable tape), but would be better if it were horizontal ribbing. Not at liberty to change the rail, so want to retro-fit some grip. Would this tape do the job?

    Answer from Rawlins’ Technical Team: 

    Yes this should be fine in this instance, we would also recommend the use of Heskins Edge Fix after application.


    Question about the product

    * Required fields
    (read)
    Send

    IMPORTANT SHIPPING & DELIVERY INFORMATION

    Heskins Conformable Safety-Grip Anti-Slip Tape is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

    Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

    Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

    All delivery costs below are excluding VAT


    You might also like

    Heskins Safety-Grip Anti-Slip Tape Rolls

    Use Heskins Safety Grip to provide extra grip on internal and exterior surfaces such as steps and stair nosings, helping to prevent slips and falls, workplace accidents, etc.Tough and durable, with high levels of Coefficient of Friction Adheres to most surfaces, including porous substrates (follow Heskins` procedures) Available on rolls...

    Price £10.02 (ex. VAT)
    In Stock and Available for Delivery

    Heskins Safety-Grip Photoluminescent Anti-Slip Tape Rolls

    Heskins Safety Grip Photoluminescent self adhesive anti slip tape provides extra grip on a wide range of surfaces such as steps and stair nosings, and glows in the dark to help prevent slips and falls.Tough and durable, with high levels of Coefficient of Friction Choose between plain design and hazard pattern Stair nosings and ready-cut...

    Price £18.74 (ex. VAT)
    In Stock and Available for Delivery

    Heskins Conformable Safety-Grip Anti-Slip Tape

    Heskins Conformable Safety Grip, a self adhesive anti slip tape covering for irregular surfaces such as durbar plate, chequer plate and diamond tread often seen in fire exits, walkways, access platforms, etc, providing excellent grip even in wet or dirty conditions.Non slip tape for steps on irregular metal treads Diamond hard mineral (9...

    Price £17.60 (ex. VAT)
    In Stock and Available for Delivery

    Heskins Safety-Grip Anti-Slip Bolt Down Plates

    Heskins Bolt Down Plates, metal fixings coated with Safety-Grip self adhesive anti slip tape for screwing to flat and lipped surfaces, steps and stairs, providing a safe and sound anti-slip surface for walking on.Screws to unstable substrates such as sodden timber, flaking or saturated concrete, etc Ideal for loose surfaces or those that...

    Price £16.49 (ex. VAT)
    In Stock and Available for Delivery

    Heskins Dual Purpose Safety-Grip Anti-Slip Floor Tiles

    Heskins Heskins Dual Purpose Safety Grip anti-slip floor tiles help to guide personnel in low-light areas or during power cuts, pointing out obstacles such as ledges and stairs, helping to reduce injuries from trips and falls.Will adhere to most surfacesContact our technical team to discuss your project on 0113 2455450Available...

    Price £1.50 (ex. VAT)
    In Stock and Available for Delivery

    Heskins Printed Safety-Grip Anti-Slip Warning Tape

    Heskins Printed Safety Grip, a durable anti-slip warning tape for highlighting hazardous areas to foot traffic.Available on rolls or ready-cut pieces Reads "Attention Danger", "Caution", or "Watch Your Step" Extremely tough Not readily affected by chemicals once applied Can be applied onto almost any interior or exterior surface R118...

    Price £2.79 (ex. VAT)
    In Stock and Available for Delivery

    Heskins Safety-Grip Walkway System

    Heskins Safety Grip Walkway System is an all-encompassing self-adhesive anti-slip roll for quick installation on floors, providing a safe route for personnel.Ideal for offices, factories and warehouse environments Provides grip even when wet Faster turnaround than paint systems Available on rolls in 2 sizes Coated with...

    Price £101.40 (ex. VAT)
    In Stock and Available for Delivery

    Heskins Removable Safety-Grip Anti-Slip Tape

    Heskins Removable Safety-Grip, ideal for weddings, promotional events, concerts, markets, etc. Has a semi-permanent adhesive that is easy to remove and won`t mark areas.Temporary self adhesive anti slip tape Hardwearing surface for extra grip R118 approved Available on 18.3m rolls from 25mm widths to 950mm Can be made to order in...

    Price £12.86 (ex. VAT)
    In Stock and Available for Delivery

    Heskins Chemical Resistant Safety-Grip Anti-Slip Tape

    Heskins Chemical Resistant Safety Grip, anti slip floor tape for use in exposed chemical environments such as cleaning cupboards, labs, hospitals, etc.Resists most chemical attacks Withstanding long term exposure to high concentration chemicals Not designed to resist harsh chemicals such as toluene, MEK etc 3 grades of friction to...

    Price £20.73 (ex. VAT)
    In Stock and Available for Delivery

    Heskins Pressure Application Roller

    Heskins Pressure Application Roller, also known as a seam roller, helps increase the durability of your anti slip tape or floor marking tape application. Once the tape is in position, applying pressure to the surface with the seam roller increases the bond between the adhesive and floor surface, resulting in a quickly cured surface. More...

    Price £10.34 (ex. VAT)
    In Stock and Available for Delivery

    Heskins Squeegee

    The Heskins Squeegee removes virtually all air bubbles for an effective, smooth application of marking tape. The squeegee is a reusable tool made from ABS resin that is strong enough to not break, but flexible enough to not cause any damage to the material. More Information Delivery Info

    Price £0.77 (ex. VAT)
    In Stock and Available for Delivery