Heskins Fire Exit Markers, self-adhesive floor markings for highlighting fire exits in factories and warehouses, helping to ensure they remain clear of boxes and clutter. Faster application compared to stencilling, masking and painting Industry-standard anti-slip coating Available in 2 sizes, for single and double doors Pre-printed with...
Heskins Safety-Grip Walkway System
Heskins Safety Grip Walkway System is an all-encompassing self-adhesive anti-slip roll for quick installation on floors, providing a safe route for personnel.
- Ideal for offices, factories and warehouse environments
- Provides grip even when wet
- Faster turnaround than paint systems
- Available on rolls in 2 sizes
- Coated with industry-standard, high-quality grit
The Heskins Safety-Grip Walkway System helps to set a safe anti-slip route for staff, customers and personnel in the workplace. Available in 2 roll sizes, the system is self-adhesive and quick to install, meaning less downtime for business and a faster turnaround when compared to painted walkways.
Ideal for use in factories and warehouse environments, the Heskins Safety Grip Walkway System is safe for interior and exterior use. Coated with industry-standard high-quality anti-slip grit that still provides grip when wet, using a Safety-Grip system can be safer than paint systems that can become slippery when wet.
All-encompassing, the walkway system is pre-prepared with a green base and two yellow walking men at regular intervals. Compliment the system with Heskins Fire Exit Markers and Heskins Handrail Grip Tape. For an alternative walkway, PermaRoute can be made to order in wide widths.
See the Heskins range of accessories for additional help during application, pro-longing the life of anti-slip tapes and line markings. The range consists of primers, edge fixing, mallets, rollers etc.
The Safety Grip range is available in many thicknesses and colours, including Transparent, Fluorescent Yellow, Hazard schemes in red/white and black/yellow, Camouflage, and Glow In The Dark Photoluminescent. The material comes on rolls as well as pre-made shapes, such as feet and boot outlines; more sizes and custom cuts, shapes and colours can be made to order, up to a maximum width of 1168mm - contact our sales team by email or on 0113 2455450 to discuss your requirements.
|Back carrier||0.1mm PVC||Caliper method|
|Type of adhesive||Solvent acrylic||N/A|
|Mineral type||Aluminium Oxide||N/A|
|Adhesion to steel (g/25.4mm²)||1500↑||PSTC-4|
|Tensile strength (Kg/25.4mm²)||6.0↑||PSTC-31|
|Tear resistance (g)||5600 +/- 200||PSTC-39|
|Elongation at break||25%↑||PSTC-31|
|Temperature range||-30ºC to +70ºC||See notes below|
|Resistance to water (months)||10||PSTC-35|
|Resistance to chemicals (months)||8||PSTC-35|
|Resistance to motor oil||Excellent||PSTC-35|
|Life (months)||12 to 24||PSTC-9|
The independent test laboratory at Adhesive Technical Services Ltd performed the temperature test, England (test results available)
|Coefficient of Friction Data|
|Dry Surface Test Result||Wet Surface Test Result|
|H3416||102 TRL||71 TRL|
The above tests were conducted in accordance with Pendulum, the tests were conducted at a recognised independent friction testing laboratory, and copy certificates are available on request. Pendulum is a dynamic test, for static tests we also have results ASTM C 1028-96.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
- Coefficient of Friction (Dry)
- 102 TRL
- Coefficient of Friction (Wet)
- 71 TRL
- Tear resistance (g)
- 5600 +/- 200
- Elongation at break
Be the first to ask a question about this product!
Heskins Handrail Grip Tape, an anti-slip tape for wrapping around internal and external handrails for extra grip. Insulated to prevent cold penetration Under-surface laminated layer of PET Satisfies UK Building Regulations Act 2000 (part M1 & M2) FAR 25.853 certified; flame and burn safe, can be used inside of commercial aircraft...
Heskins Glow In The Dark Floor Signs, directional signs to guide personnel down emergency routes and towards fire exits. Useful for dimly-lit areas or those prone to power failure Quick and easy to install in minutes Faster application than paint and stencil systems Charges from natural and artificial/incandescent light sources Applies...
Heskins PermaStripe rolls, part of a durable line marking system for warehouse and factory floors and a great alternative to resin or painted lines. Create clearly defined high-visibility routes for employees to perform duties and guests to pass through work areas safely and effectively. Marks out aisles, bays, escape routes, etc 2...
Heskins PermaStripe Die-Cut Shapes form part of a durable line marking system for warehouse and factory floors and a great alternative to resin or painted lines. Create clearly defined, high-visibility routes for employees to perform duties and guests to pass through work areas safely and effectively. Quick to install - self adhesive and...
Heskins PermaRoute Rolls are thermoplastic line marking tape that form part of a complete floor marking system for warehouses, factories and industrial environments. Combine with PermaRoute Shapes to create corners, junctions, bays, etc Durable, with a top laminated surface that won`t scratch off Solvent-free - no fumes, ideal for areas...
Heskins PermaRoute Shapes are part of a complete floor marking system for industrial environments such as warehouses, factories, assembly areas, etc. Excellent alternative to resin and painted lines Combine with PermaRoute Rolls to create corners, junctions, bays, etc Durable, with a top laminated surface that won`t scratch off...