Heskins Safety-Grip Anti-Slip Tape Shapes

    H3401S
    HES4741

    Use Heskins Safety Grip Anti-Slip Tape Shapes to provide extra grip on internal and exterior surfaces such as steps and stair nosings, helping to prevent slips and falls, workplace accidents, etc.

    • Tough and durable, with high levels of Coefficient of Friction
    • Adheres to most surfaces, including porous substrates (follow Heskins` procedures)
    • Available in ready-cut shapes, such as feet and boots
    • Custom shapes, sizes and cuts can be made to order, in most RAL colours
    • Very easy to apply - self-adhesive
    • Withstands most chemicals present in industrial and commercial environments, with excellent resistance to motor oil
    • R118 Approved
    • Ensure to read the Application Guide, downloadable from the "Data Sheets" tab, before purchase and application

    Colour
    Pick a Colour
    • Current colour: RAL 9004 - Black
    Close colour picker
    • Transparent
    • Hazard Black/Yellow
    • Hazard Red/White
    • RAL 9004 - Black
    • RAL 5000 - Blue
    • RAL 8002 - Brown
    • RAL 6010 - Green
    • RAL 1023 - Yellow
    • RAL 3020 - Red
    • RAL 2004 - Orange
    • RAL 1016 - Fluorescent Yellow
    • RAL 9003 - White
    • RAL 7004 - Grey
    Size
    Finish
    £2.43(ex. VAT)
    £2.92 (inc. VAT)
    Quantity
    Please choose your colour
    Available for Delivery (See Delivery Options Below)

    Description

    Heskins Safety-Grip Anti-Slip Tape Shapes are a tough, durable, self-adhesive anti-slip material providing extra grip on a wide range of surfaces, including porous substrates, such as steps and stair nosings. Ideal for pedestrian traffic or light vehicular traffic, Safety-Grip is very easy to apply and can be used on most surfaces, making it particularly useful for workplaces - even on the forks of forlift trucks - and has even been used at events such as Red Bull's Cliff Diving and during BMX trials at the Rio 2016 Olympics, London 2012, and Baku 2015.

    Once applied correctly (following Heskins' procedures) by simply removing the backing tape and pressing into position, Safety-Grip provides grip even if oil, water or other contaminants are present, and is fully effective after 48 hours. The tape has been used in extreme and challenging environments, including the tops of wind turbines to aid inspection and maintenance, and upon the Mundo Marino Platu 25 boat during competition. One company coated the flat surfaces of their waste-disposal bins with Safety-Grip to prevent stickers, posters and flyers from being stuck on the sides.

    The Safety-Grip range is available in many thicknesses and colours, including Transparent, Fluorescent Yellow, Hazard schemes in red/white and black/yellow, Camouflage, and Glow In The Dark Photoluminescent. The material is also available on rolls (see Heskins Safety-Grip Anti-Slip Tape Rolls) as well as pre-made shapes, such as feet and boot outlines; more sizes and custom cuts, shapes and colours can be made to order, up to a maximum width of 1168mm - contact our sales team by email or on 0113 2455450 to discuss your requirements.

    Check out the videos above for applications instructions to different substrates and surfaces, or contact our technical team for more information on 0113 2455450.

    See the Heskins range of accessories for additional help during application, pro-longing the life of anti-slip tapes and line markings. The range consists of primers, edge fixing, mallets, rollers etc.

    For application on irregular surfaces, such as ribbed decking, see Heskins Conformable Safety-Grip or Heskins Safety-Grip Bolt Down Plates.



    Features & Benefits


    • Tough and durable anti-slip material
    • Also available on rolls in various widths
    • Adheres to most surfaces (follow Heskins' procedures)
    • Ideal for steps, stairs and walkways
    • Use with Heskin's Bolt Down Plates to apply to decking
      • See video above for details
    • High levels of Coefficient of Friction - details further below
      • Made of abrasive aluminium oxide particles
      • See safety data sheets in the Attachments section for more test results
    • Very easy to apply
    • Withstands most chemicals present in commercial environments
      • Excellent resistance to motor oil
    • R118 Approved
    • Custom shapes, sizes and cuts can be made to order, in most RAL colours
    • Glow In The Dark Safety Grip also available.



    Ordering References


    Contact our sales team by email or on 0113 2455450 to order custom shapes, sizes and cuts, which can be made to order in most RAL colours.

    For boot/foot shapes, please download and refer to the size guide.

     

    Standard Grip


    Colours

    Includes Black, Brown, Fluorescent Yellow, Green, Grey, Orange, Red, White, Yellow, Blue and Transparent.

    Available sizes:

    • 25mm x 18.3m
    • 50mm x 18.3m
    • 100mm x 18.3m
    • 140mm x 140mm
    • 150mm x 610mm
    • 50mm Ø disk
    • TL29 Boot - 240mm x 90mm
    • TL37 Foot outline - 280mm x 105mm
    • TL99 Full foot - 57mm x 104mm
    • TL100 Full foot - 102mm x 210mm
    • TL242 Boot - 300mm x 120mm

    Hazard

    Includes Red/White (RAL3000 & 9016) and Black/Yellow (RAL1023 & 9017).

    Available sizes:

    • 25mm x 18.3m
    • 50mm x 18.3m
    • 100mm x 18.3m
    • TL29 Boot - 240mm x 90mm
    • TL37 Foot outline - 280mm x 105mm
    • TL99 Full foot - 57mm x 104mm
    • TL100 Full foot - 102mm x 210mm
    • TL242 Boot - 300mm x 120mm

    Camouflage

    Available sizes:

    • 25mm x 18.3m
    • 50mm x 18.3m
    • 100mm x 18.3m

     

    Coarse Grip


    The coarser Safety Grip provides a surface more resistant to clogging from dust and mud, making it ideal for use on construction and building sites.

    The grit is still the same substance, aluminium oxide; the grit granules are larger with deeper valleys and higher peaks. A deep anti slip coating helps to prevent clogging with dirt, dust, ice etc.

    Colours

    Includes Black and Yellow.

    Available sizes:

    • 25mm x 18.3m
    • 50mm x 18.3m
    • 100mm x 18.3m
    • 140mm x 140mm
    • 150mm x 610mm
    • 50mm Ø disk

    Hazard

    Includes Black/Yellow (RAL1023 & 9017).

    Available sizes:

    • 25mm x 18.3m
    • 50mm x 18.3m
    • 100mm x 18.3m
    • 150mm x 610mm

     

    Extra Coarse


    Designed for heavy duty, industrial use, the extra-coarse Safety Grip copes with harsh environments and heavy use.

    Available in Black or Green, in the following sizes:

    • 25mm x 18.3m
    • 50mm x 18.3m
    • 100mm x 18.3m
    • 140mm x 140mm
    • 150mm x 610mm



    Product Details


    The material is constructed from a self-adhesive plastic base film.

    The adhesive is pressure sensitive and is protected by a siliconised treated release paper.

    The upper surface consists of abrasive aluminium oxide particles held in place by a polymer resin. Prior to setting, the granules are charged by static electricity to help point upwards thus increasing grip levels.

    When applied, Safety Grip will typically last 3 years, and can be incinerated or disposed of through conventional methods; the waste disposal code is 20.01.04.



    Application Instructions


    These instructions can be downloaded in the attachments tab above, along with more safety data and test results.

    For best results follow the instructions below to ensure maximum performance in all environments.

    1. Material Storage - Ensure the material is kept in dry, warm conditions in the original protective packaging.
    2. Surface Preparation - A clean, dry surface is essential. Use an IPA cleaner to remove all surface contaminants (paint flakes, etc) – DO NOT use methylated spirits/petrol/lighter fluid etc as these leave behind a thin, greasy residue. Ensure prepared surface is above 10°C.
    3. Porous Surface Sealing - Porous surfaces must be sealed prior to application to prevent water attacking the adhesive. Toluene based primers are ideal - we recommend Heskins own H3506 Primer for this job. Apply a thin coat to the cleaned surface using a paint brush, then leave to dry.
    4. Tape Application - Peel back part of the release liner then press the adhesive firmly onto the prepared surface, and slowly keep peeling back the liner while applying the tape. Try to ensure that the tape is not taut.
    5. Finish! - Once applied, press tape down firmly using even pressure (decorating rollers are excellent for this). We recommend sealing the edges using ‘edge fix’ as this will extend the life of the product. Only use a small amount down the edges, a thin bead.

    If correctly applied, the new anti-slip surface can be walked on instantly, you will get maximum benefit from the adhesive system after 48 hours.



    Safety Data & Test Data


    SubjectResultTest Method
    Back carrier0.1mm PVCCalliper method
    Type of adhesiveSolvent acrylicN/A
    Mineral typeAluminium OxideN/A
    Adhesion to steel (g/25.4mm²)1500↑PSTC-4
    Tensile strength (Kg/25.4mm²)6.0↑PSTC-31
    Tear resistance (g)5600 +/- 200PSTC-39
    Peel adhesion, N/25mm23.5180° FINAT FTM1
    Tensile strength, N/25mm68Lloyd, 500N load cell
    Elongation at break25%↑PSTC-31
    Temperature range-40ºC to +70ºCSee notes below
    Maximum size of production roll1168mm x 100mN/A
    Resistance to water (months)10PSTC-35
    Resistance to chemicals (months)8PSTC-35
    Resistance to motor oilExcellentPSTC-35

    The independent test laboratory at Adhesive Technical Services Ltd performed the temperature test, England (test results available on request)

    For more in-depth safety and test data, please refer to the attachments above, or give our technical team a call on 0113 2455450.

    Coefficient of friction data
    Safety-GripDry surface test resultWet surface test result
    Standard102 TRL71 TRL
    Coarse99 TRL80 TRL
    X-Coarse102 TRL80 TRL



    R118 approved


    This is a test to determine “the burning behaviour and/or the capability to repel fuel or lubricant of materials used in the construction of M3 category vehicles classified II or III.”

    Heskins Safety Grip was put through 3 out of the 5 tests that are in the R118 regulation (not all are required to pass). As detailed on the R118 certification, the material was subjected to Annexe 6, 7 and 8.

    Product Details
    4741-766962

    Data sheet

    Manufacturer
    Heskins
    For Use By
    Industrial Use
    Single, Two or Three Pack
    Single
    Key Features
    Provides extra grip on surfaces, such as stairs, even if oil, water or other contaminants are present
    Application
    Self-Adhesive
    Tensile Strength
    68.0
    Max. Application Temperature
    +70°C
    Min. Application Temperature
    -40°C
    Coefficient of Friction (Dry)
    102 TRL
    Coefficient of Friction (Wet)
    71 TRL
    Tensile strength (kg/25.4mm2)
    6.0↑
    Tear resistance (g)
    5600 +/- 200
    Elongation at break
    25%↑
    Resistance to water
    10 months
    Resistance to chemicals
    8 months
    Resistance to motor oil
    Excellent
    Finish
    Anti-Slip
    Application Method
    Self-Adhesive
    Product Usage Type
    Shapes
    Product Range
    Safety-Grip
    Product Type
    Abrasive
    Attachments
    Download


    Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


    Be the first to ask a question about this product!


    Question about the product

    * Required fields
    (read)
    Send

    IMPORTANT SHIPPING & DELIVERY INFORMATION

    Heskins Safety-Grip Anti-Slip Tape Shapes is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

    Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

    Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

    All delivery costs below are excluding VAT


    You might also like

    Heskins Safety-Grip Photoluminescent Anti-Slip Tape Rolls

    Heskins Safety Grip Photoluminescent self adhesive anti slip tape provides extra grip on a wide range of surfaces such as steps and stair nosings, and glows in the dark to help prevent slips and falls.Tough and durable, with high levels of Coefficient of Friction Choose between plain design and hazard pattern Stair nosings and ready-cut...

    Price £18.74 (ex. VAT)
    In Stock and Available for Delivery

    Heskins Conformable Safety-Grip Anti-Slip Tape

    Heskins Conformable Safety Grip, a self adhesive anti slip tape covering for irregular surfaces such as durbar plate, chequer plate and diamond tread often seen in fire exits, walkways, access platforms, etc, providing excellent grip even in wet or dirty conditions.Non slip tape for steps on irregular metal treads Diamond hard mineral (9...

    Price £17.60 (ex. VAT)
    In Stock and Available for Delivery

    Heskins Safety-Grip Anti-Slip Bolt Down Plates

    Heskins Bolt Down Plates, metal fixings coated with Safety-Grip self adhesive anti slip tape for screwing to flat and lipped surfaces, steps and stairs, providing a safe and sound anti-slip surface for walking on.Screws to unstable substrates such as sodden timber, flaking or saturated concrete, etc Ideal for loose surfaces or those that...

    Price £16.49 (ex. VAT)
    In Stock and Available for Delivery

    Heskins Dual Purpose Safety-Grip Anti-Slip Floor Tiles

    Heskins Heskins Dual Purpose Safety Grip anti-slip floor tiles help to guide personnel in low-light areas or during power cuts, pointing out obstacles such as ledges and stairs, helping to reduce injuries from trips and falls.Will adhere to most surfacesContact our technical team to discuss your project on 0113 2455450Available...

    Price £1.50 (ex. VAT)
    In Stock and Available for Delivery

    Heskins Printed Safety-Grip Anti-Slip Warning Tape

    Heskins Printed Safety Grip, a durable anti-slip warning tape for highlighting hazardous areas to foot traffic.Available on rolls or ready-cut pieces Reads "Attention Danger", "Caution", or "Watch Your Step" Extremely tough Not readily affected by chemicals once applied Can be applied onto almost any interior or exterior surface R118...

    Price £2.79 (ex. VAT)
    In Stock and Available for Delivery

    Heskins Safety-Grip Walkway System

    Heskins Safety Grip Walkway System is an all-encompassing self-adhesive anti-slip roll for quick installation on floors, providing a safe route for personnel.Ideal for offices, factories and warehouse environments Provides grip even when wet Faster turnaround than paint systems Available on rolls in 2 sizes Coated with...

    Price £101.40 (ex. VAT)
    In Stock and Available for Delivery

    Heskins Chemical Resistant Safety-Grip Anti-Slip Tape

    Heskins Chemical Resistant Safety Grip, anti slip floor tape for use in exposed chemical environments such as cleaning cupboards, labs, hospitals, etc.Resists most chemical attacks Withstanding long term exposure to high concentration chemicals Not designed to resist harsh chemicals such as toluene, MEK etc 3 grades of friction to...

    Price £20.73 (ex. VAT)
    In Stock and Available for Delivery

    Heskins Marine Safety-Grip Anti-Slip Tape

    Heskins Marine Safety Grip, a tailor-made anti slip tape for marine environments, for use on boats and ships out in the open sea.Use on pleasure craft to competitive boats and commercial vessels Salt resistant Comfortable for bare feet Excellent grip in stressed environments, such as the open sea More sizes and custom cuts can be made...

    Price £11.60 (ex. VAT)
    In Stock and Available for Delivery

    Heskins Edge Fix (140ml)

    Heskins Edge Fix (140ml) greatly helps to prevent the lifting of the Safety-Grip™ antislip in high traffic areas. Simply apply a small amount of the edge fix down the side of the tape using the narrow nozzle built into the tube, helping to secure the product and extend its life. More Information Delivery Info

    Price £13.49 (ex. VAT)
    In Stock and Available for Delivery

    Heskins Primer

    Heskins Primer seals porous surfaces such as wood, concrete or stone prior to application of Heskins` anti-slip tapes, preventing moisture from degrading the adhesive. The surface primer also greatly helps to create an extra bond on other surfaces.Typical coverage - 5m² per litre. Available in water-based or solventMore Information...

    Price £13.83 (ex. VAT)
    In Stock and Available for Delivery

    Heskins Cleaner

    Heskins Cleaner, also known as IPA Cleaner, cleans surfaces effectively before the application of Heskins` anti-slip grip tapes. The cleaner helps to remove contaminants and does not leave behind a greasy residue, unlike methylated spirits, petrol etc. Only a small amount is needed per job, making the 1 litre bottle very economical. More...

    Price £13.74 (ex. VAT)
    In Stock and Available for Delivery

    Heskins Pressure Application Roller

    Heskins Pressure Application Roller, also known as a seam roller, helps increase the durability of your anti slip tape or floor marking tape application. Once the tape is in position, applying pressure to the surface with the seam roller increases the bond between the adhesive and floor surface, resulting in a quickly cured surface. More...

    Price £10.34 (ex. VAT)
    In Stock and Available for Delivery

    Heskins Squeegee

    The Heskins Squeegee removes virtually all air bubbles for an effective, smooth application of marking tape. The squeegee is a reusable tool made from ABS resin that is strong enough to not break, but flexible enough to not cause any damage to the material. More Information Delivery Info

    Price £0.77 (ex. VAT)
    In Stock and Available for Delivery

    Heskins Thick Safety-Grip Anti-Slip Tape

    Heskins Thick Safety-Grip is a much thicker (2mm) anti-slip tape in the Safety-Grip range, providing grip in recesses and standing above surrounding surfaces such as metal or stone. Ensure to read the Application Guide, downloadable from the "Data Sheets" tab, before purchase and application More Information Delivery Info

    Price £28.44 (ex. VAT)
    In Stock and Available for Delivery