A high build polyurethane topcoat, specifically formulated to offer optimum performance for the protection and redecoration of architectural metal cladding. Provides a tough, durable finish combining abrasion resistance with outstanding colour and sheen retention giving longer life expectancies while being able to cure at sub zero temperatures and tolerate slight surface moisture during application.
Recommended for the maintenance of Corus Colorcoat HP200 and HPS200 cladding. It’s also suitable for PVF2, Silicone Polyester and Polyester Cladding as well as bare galvanised and aluminium surfaces when applied over 903 Cladding Primer.
• Up to 15yrs protection
• Tough, durable and weather resistant
• Cures at sub zero temperatures
• Tolerant of slight surface moisture during application
• Available in a wide range of colours including metallic shade RAL 9006 White Aluminium
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
|Typical Coverage (per coat)||9m² per litre|
|Touch Dry||1 hour|
|Application||Brush, Roller, Spray|
|The figures stated above are approximate. Please ensure you refer to all datasheets for full application information.|
Be the first to ask a question about this product!
Colour reproduction of the Products on the Site is limited by the technology used to deliver web pages and by the colour representation of Customer’s own monitor and computer set-up. We have made every effort to display as accurately as possible the colours of our Products but we cannot guarantee that the colour shown on Customer’s monitor’s display will accurately reflect the colour of the Product on delivery. We recommend that Customer first purchases the smallest Product available or access an industry standard colour chart in person (and not digitally) to ensure that the colour is acceptable for its purposes. For more information, please see our Terms & Conditions of Sale.Close