Tor Unicover Ultra S

Professional use only - from the 24th August 2023, adequate training is required before industrial or professional use of this product.

Should you require training, visit - https://www.safeusediisocyanates.eu/

Tor Unicover Ultra S (RC402) is a high performance, hardwearing colour stable top coat for long term exterior protection of concrete and steel structures, roofs, cladding, etc. A two-pack, high solids aliphatic urethane pre-polymer containing light-fast pigments and inert extenders. Cures by activation with atmospheric moisture. Also suitable as finishing coat of moisture cured systems for cementitious surfaces etc.

Features & Benefits

• Two-pack system
• Quick and easy application
• Wide colour range available
• Attractive semi-gloss finish
• Fast curing formula
• Flexible
• Excellent resistance to weathering
• Cost effective
• Provides long term protection - 15 year system

What does the system include?

Primer
Chosen to promote adhesion on a range of metal surfaces with varying conditions.

Topcoat
Unicover Ultra S (RC402), a high performance, high solids, hardwearing colour stable top coat for long term exterior protection of roofs and cladding.

Product Appearance

Smooth, plain colour, high-performance, protective coating with a semi-gloss finish.

What does it do?

Unicover Ultra S has been specifically designed to provide a high performance and attractive finish for the refurbishment, decoration and protection of weathered roof and vertical sheet cladding, profiled metal sheet roofs, roof edge trims and cappings and “Mansard” type roof edge cladding systems etc.

Unicover Ultra S can also be used in conjunction with Tor Elastaseal™ products to provide a hybrid waterproofing coating for metal sheet roof systems.

Where can it be used?

Substrates
Suitable for refurbishing many types of architectural cladding including: PVC Plastisols, PVF2, Silicone Polyester, powder coated or GRP sheets and trims, and asbestos cement/fibre cement sheeting.

Buildings
Unicover Ultra S is ideally suited for refurbishing and protecting weathered substrates on many types of building:

• Retail units
• Warehouses and distribution centres
• Factories
• Schools and colleges
• Hospitals and care homes
• Garages

Surface Preparation

Ensure surfaces are sound, clean, dry, properly prepared and primed where necessary with Tor Elastaseal Z Metal Primer (RC145). Can also be applied over Elastaseal-treated sheeted roofs.

Method of Application

Brush, short pile roller, or airless spray. Apply one or two coats as required over primed/undercoated surfaces ensuring good edge cover.

Limitations

• Do not apply onto damp substrates. Prior to spray application, care should be taken to thoroughly dry off any surface condensation that may be present.
• Do not use personnel who are asthmatic to apply these products, especially in confined spaces.
• Application of excessive material may result in down-glossing and other film defects.
• Must be over coated within 48 hours otherwise sanding and/or solvent washing may be required in order to maintain intercoat adhesion.