Rust-Oleum 9170 Epoxy Metal Primer
A fast drying metal primer based on two-component epoxy resin offering extra protection against corrosion on bare or blasted metal, also ideal for galvanised metal under severe conditions.
Rust-Oleum 9170 Epoxy Metal Primer is a fast drying metal primer based on two-component epoxy resin offering extra protection against corrosion on bare or blasted metal. Rust-Oleum 9170 Epoxy Metal Primer is the best fast drying primer for bare and galvanised metal under severe conditions.
Rust-Oleum 9170 Epoxy Metal Primer is designed for application on bare or blasted metal and can be recoated with Rust-Oleum 9100 topcoats, offering the appropriate protection against strong chemicals, acids, alkalis and solvents; frequent product spillage and frequent chemical cleaning; high humidity and moist conditions.
Features & Benefits
- Fast drying
- High film build; up to 100 microns dry in one coat is possible
- Easy to apply
- Excellent adhesion
- Easy mixing (1:1 ratio)
Please note: This product is recoatable with 9100 Epoxy topcoat and if good U.V. resistance is required, Rust-O-Thane Polyurethane Topcoat 9600 should be applied.
Please contact Rawlins Paints' Technical Support Team on 0113 2455450 for more information.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Be the first to ask a question about this product!