Wethertex C10 Multi-Surface Fungicidal Wash

Wethertex C10 Multi-Surface Fungicidal Wash is a ready to use, water based masonry wash for the removal of a broad range of bacterial, algal and fungal growth on masonry surfaces prior to painting. Developed using fast acting bioactive tec-nology, the product is particularly effective against algae and mould growth and creates a clean surface, ready for painting.

Features & Benefits

• Long term protection
• Fast acting
• Bio Stop
• Kills algae and mould growth
• Ready to use
• Suitable for hand or spray application
• For use on masonry or wood

Preparation

Organic growths may indicate consistently damp conditions and substandard direct sunlight. Sources of moisture should be identified and rectified to prevent recurrence. Condensation, rising damp, faulty plumbing or guttering, etc. should be considered as a possible source. Remove all loose and flaking material by cleaning the surface with a soft bristle brush. If possible, power wash the substrate with a suitable power washer.

Application

Apply C10 Multi-surface Fungicidal Wash directly onto the surface using a pressurised knapsack or garden sprayer but can be brush or roller applied. Ensure the surface is drenched in the wash and has been absorbed into the capillaries of the substrate. C10 Fungicidal Wash should be left for 24hrs to take effect and kill the growing moss and unseen spores. Dead growth should be removed by brushing with a steel brush or a suitable power washer.

Note: Do not apply C10 Multi-surface Fungicidal Wash in rain or in temperatures below 5°C.