SikaBond Wood & Laminate Floor Cleaner is a ready-to-use, spray-applied hard floor cleaner suitable for use on laminate, wood, ceramic, polished stone & vinyl floors, leaving a clean, smear-free surface. Features and Benefits Ready to use – no dilution required No rinsing required – just spray and wipe Fast acting Safe and...
Coo-Var Oil Remover
Coo-Var Oil Remover is a water based, environmentally friendly cleaner with powerful cleaning and degreasing properties. To be used to degrease and remove oil patches from the surface prior to acid etching or painting. An excellent addition to the cleaning and preparation process.
- Designed for use on floors, walls and other hard surfaces.
- Rapidly releases heavy oils, hydrocarbons and ground-in dirt from surfaces such as concrete, brick and breezeblock.
- Used to deep clean floor surfaces prior to the application of coatings, seals and other finishes.
- Removes slip hazards following leaks and spills.
- Contains no dangerous caustic chemicals, harmful solvents, phosphates or aggressive biocides.
Coo-Var Oil Remover is a water based, environmentally friendly cleaner with powerful cleaning and degreasing properties. To be used to degrease and remove oil patches from the surface prior to acid etching or painting. An excellent addition to the cleaning and preparation process. An aqueous, environmentally friendly cleaner suitable for use on floors, walls and other hard surfaces.
Sweep floor to remove debris.
Apply liberally to the area to be cleaned. Work well into the surface with a stiff brush and leave for 20 to 60 minutes. Rinse the area well with a pressure washer or hose, collect the rinse water with a wet vac machine. Once the surface oil contamination has been removed, continue with any surface preparation as necessary i.e. mechanical abrasion or chemical etching as required to provide a key for a subsequent coating.
Allow the surface to dry thoroughly. This can take up to several days. Apply a suitable primer for the surface if overcoating.
Oil remover contains no dangerous caustic chemicals, harmful solvents, phosphates or aggressive biocides. It is safer for the user and the environment.
Please contact Rawlins Paints' Technical Support Team on 0113 2455450 for more information.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
- Base Type
- Apply Manually
- 1-2m² per litre
- Shelf Life (from date of manufacture)
- 12 Months
- UN Number
Be the first to ask a question about this product!
Paving can be a breading ground for all sorts of pollution and stains, including soil. The Mona-Clean Paving Cleaner will effectively remove these kinds of nasties, leaving it gleaming and looking great. Advantages Easy to apply; no extensive labour needed. Economical; cost-effective for your wallet. 12-month shelf life; no need to use...
Blackfriar Professional Acid Etch is a surface preparation solution for use on concrete and screed floors that removes excess lime dust (laitence) which can interfere with the adhesion of floor coatings. Product Features Hydrochloric acid solution. Etches power floated, very smooth, hard or chemically treated concrete floors to ‘key’ the...
Coo-Var Acid Etch is a careful blend of acids and wetting agents in solution, used to clean and ‘etch’ concrete/mortared floors and pools prior to painting. Used to prepare new and smoothed concrete. Product Details Removes laitance from concrete/render Removes salts from concrete/render Can be used as a degreaser Removes patches of oil...
SS2 Sterilising Solution is a specially prepared, ready to use wash for use before painting to protect against mould or algae with the Hydron Nu-Cryl System. Advantages Kills spores of mould and algae. Prevents the growth of new spores for up to 3 years. Ready to use product. 8-10m² per Litre coverage.
SS1 Sterilising Solution is a specially prepared, ready to use wash for use before painting to protect surfaces against mould or fungi before appyling the Hydron Nu-Cryl System. Advantages Protects against mould or fungi Supplied in 5 & 25 litres Colourless solution 12-month shelf life
Sika Brick and Patio Cleaner is a fast acting acid based formula which dissolves mortar and cement stains, ingrained dirt and most paints on mineral surfaces such as brick, stone, concrete, paving slabs and earthenware. Can be cleaned up after use with cold water. Features and Benefits Removes mortar, cement, efflorescence, stains and...
Bradite Acid Etch removes excess lime from power floated or very smooth concrete floors, this Acid Etch from Bradite is an ideal pre-treatment for concrete surfaces. Manufactured under the auspices of an ISO 9001:2008 & ISO 14001:2004. Advantages Pre-treatment for concrete surfaces Removes excess lime from power floated or very smooth...
Sika Concrete Remover is a highly concentrated, fast acting acid based formula which removes concrete waste and spillage. Removes ingrained dirt and most paints on mineral surfaces such as brick, render and concrete. Clean up after use is with cold water. Features and Benefits Acid based - powerful cleaning action. Water clean up....
Public car parks and driveways inevitably get stained with oil and grease. The unslightly appearance isn't just grubby, it can also be a health and safety hazard. Using Mona-Clean Oil Dispersant will combat this, effectively removing oil and grease; the end result is an aesthetically-pleasing surface. Ideas for Uses Roads and car parks....
Rust-Oleum Floor Cleaner is an extremely economical daily cleaner for floors, and does not harm or discolour coatings, even alkyd paints, making it an ideal maintenance product for coated floors. It is sold in 5 & 1 litre units for convenience and for heavy pollution it should not be diluted, for daily cleaning a dilution of up to 1:8 is...
Coo-Var Universal Degreaser Cleaner is a careful blend of solvents to give powerful cleaning and degreasing properties. Product Features Degreases and removes oil patches from floors, walls, interior and exterior surfaces prior to acid etching or painting. Part of the cleaning process. Essential for a good finish. Can also be used as a...
If your project involves applying a coating onto external tiled roofs, walls, timber decking or block paving, then Britannia Fungicidal Wash Solution is the ideal pre-treatment to clean fungus and algae from surfaces prior to painting. The product is cleared under the control of pesticides Regulations 1986. Advantages Treats fungal/algal...
Rust-Oleum Mathys 108 Surfa Etch Solution is an easy to use, non-flammable and virtually odour free etching solution for the preparation of smooth concrete surfaces, masonry, galvanized steel and aluminum before applying a paint coating system. Improves the adhesion of coating systems Neutralizes alkaline salts Also ideal to remove "white...
Rust-Oleum 2901 Epoxyshield Cleaner/Degreaser for floors is a concentrated, alkaline, non-flammable, virtually odour-free cleaning/degreasing solution. Removes grease, oil and other contaminations Virtually odour free Non-flammable 6-8 m²/l coverage
Dumond Smart Strip PRO Professional Strength Paint Remover effectively removes 2-component, high-performance coatings and lead paints, including multiple coats of oil-based, water-based, acrylics, varnishes, epoxies, urethanes, elastomeric and lead paint from most interior or exterior surfaces (wood, brick, stone, concrete, plaster, metal,...