Coo-Var Universal Degreaser Cleaner
Coo-Var Universal Degreaser Cleaner is a careful blend of solvents to give powerful cleaning and degreasing properties.
Coo-Var Universal Degreaser Cleaner is a careful blend of solvents to give powerful cleaning and degreasing properties. To be used to degrease and remove oil patches etc. from the surface prior to acid etching or painting. Part of the cleaning process. Essential for a good finish, apply by lintless cloth.
Be the first to ask a question about this product!
Rust-Oleum Floor Cleaner is an extremely economical daily cleaner for floors, and does not harm or discolour coatings, even alkyd paints, making it an ideal maintenance product for coated floors. It is sold in 5 & 1 litre units for convenience and for heavy pollution it should not be diluted, for daily cleaning a dilution of up to 1:8 is possible.
Sika Brick and Patio Cleaner is a fast acting acid based formula which dissolves mortar and cement stains, ingrained dirt and most paints on mineral surfaces such as brick, stone, concrete, paving slabs and earthenware. Can be cleaned up after use with cold water.
SS2 Sterilising Solution is a specially prepared, ready to use wash for use before painting to protect against mould or algae with the Hydron Nu-Cryl System. Advantages Kills spores of mould and algae. Prevents the growth of new spores for up to 3 years. Ready to use product. 8-10m² per Litre coverage.
Sika Concrete Remover is a highly concentrated, fast acting acid based formula which removes concrete waste and spillage. Sika Concrete Remover also removes ingrained dirt and most paints on mineral surfaces such as brick, render and concrete. Clean up after use is with cold water.
If your project involves applying a coating onto external tiled roofs, walls, timber decking or block paving, then Britannia Fungicidal Wash Solution is the ideal pre-treatment to clean fungus and algae from surfaces prior to painting. The product is cleared under the control of pesticides Regulations 1986. Advantages Treats fungal/algal growth. Easy...
Rust-Oleum Mathys 108 Surfa Etch Solution is an easy to use, non-flammable and virtually odour free etching solution for the preparation of smooth concrete surfaces, masonry, galvanized steel and aluminum before applying a paint coating system.
Coo-Var Acid Etch is a careful blend of acids and wetting agents in solution, used to clean and ‘etch’ concrete/mortared floors and pools prior to painting. ADVANTAGES Removes laitance from concrete/render Removes salts from concrete/render Can be used as a degreaser Removes patches of oil and grease. Essential for good adhesion
Removes excess lime from power floated or very smooth concrete floors, this Acid Etch from Bradite is an ideal pre-treatment for concrete surfaces. Manufactured under the auspices of an ISO 9001:2008 & ISO 14001:2004. Advantages Pre-treatment for concrete surfaces Removes excess lime from power floated or very smooth concrete floor Gives improved...
An aqueous alkaline low foaming detergent used for degreasing contaminated surfaces prior to painting. Ideally suited for degreasing oily or soiled surfaces and for removing road dirt. Manufactured under the auspices of an ISO 9001:2008 & ISO 14001:2004. Advantages Biodegradable in general use Economical degreasing alternative to solvents Mild odour...
Public car parks and driveways inevitably get stained with oil and grease. The unslightly appearance isn't just grubby, it can also be a health and safety hazard. Using Mona-Clean Oil Dispersant will combat this, effectively removing oil and grease; the end result is an aesthetically-pleasing surface. Ideas for Uses Roads and car parks. Garages....
SikaBond Wood & Laminate Floor Cleaner is a ready-to-use, spray-applied hard floor cleaner suitable for use on laminate, wood, ceramic, polished stone & vinyl floors, leaving a clean, smear-free surface with a pleasant odour. Easy to use, with no need for dilution, you can just spray and wipe.
A water based, environmentally friendly cleaner with powerful cleaning and degreasing properties. To be used to degrease and remove oil patches from the surface prior to acid etching or painting. An excellent addition to the cleaning and preparation process.
SS1 Sterilising Solution is a specially prepared, ready to use wash for use before painting to protect surfaces against mould or fungi before appyling the Hydron Nu-Cryl System. Advantages Protects against mould or fungi Supplied in 5 & 25 litres Colourless solution 12-month shelf life
Paving can be a breading ground for all sorts of pollution and stains, including soil. The Mona-Clean Paving Cleaner will effectively remove these kinds of nasties, leaving it gleaming and looking great. Advantages Easy to apply; no extensive labour needed. Economical; cost-effective for your wallet. 12-month shelf life; no need to use...