Rust-Oleum Pre-Paint Cleaner cleans and degreases surfaces before painting. It is suitable for all types of surfaces and is not flammable, not corrosive and nearly odourless. Rust-Oleum Pre-Paint Cleaner is for all types of surfaces including floors, walls, doors, windows, metal, etc. it cleans, degreases and also removes nicotine stains....
Sika Mould Buster
Sika Mould Buster is a powerful, fast acting solution which is effective on most surfaces. It removes algae, mould and green growth without the need for scrubbing or pressure washing.
Approved under the Control of Pesticides Regulation 1986 (as amended) for use as directed. HSE No 8376. Also approved for use in Ireland, PCS No. 96329.
Features and Benefits
- No scrubbing or pressure washing required
- Biodegradable – no bleaches or acids
- Helps protect against early regrowth
Sika Mould Buster is a powerful, fast acting solution which is effective on most surfaces. It removes algae, mould and green growth without the need for scrubbing or pressure washing. Sika Mould Buster is approved under the Control of Pesticides Regulation 1986 (as amended) for use as directed. HSE No 8376. Also approved for use in Ireland, PCS No. 96329.
- No scrubbing or pressure washing required.
- Biodegradable – no bleaches or acids.
- Helps protect against early regrowth.
Areas For Use
- Brickwork and masonry
- Decking and garden furniture
- All exterior hard surfaces
- Do not use if rain is expected within 5-6 hours of application.
- May leave a slight sheen on the surface after application. This will dissipate naturally over time.
- Use only as directed.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Be the first to ask a question about this product!
Sika Hand Cleanser is for the removal of uncured Sikaflex and SikaBond products from hands. The special formula works quickly to easily remove unwanted product that has got onto hands during application.
Cleaning agent used for degreasing and cleaning contaminated surfaces prior to painting. May be used to clean properly cured acrylics, alkyds, epoxies, phenolics, polyurethanes and others as recommended. Top Features Minimum toxicity - waterborne Biodegradable
Krud Kutter Gloss-Off is a no rinse formula that's specially deisgned to prepare high gloss and other hard-to-stick-to surfaces for repainting or refinishing. Specially formulated to help new paint and varnish bond to old finishes, or as a wall preparation prior to wallpapering. Krud Kutter Gloss-Off cleans and deglosses without sanding increasing...
GacoFlex GacoWash is a concentrated cleaning solution for roof membranes and existing waterproof systems. It is specially formulated to remove tough dirt, pollen, mildew and fungus. Ideal for use as a cleaning solution for aged asphalt, aged EPDM and TPO/CPA, built-up, cap sheet, composite, concrete, fiberglass, metal, modified bitumen and...
Krud Kutter Original Cleaner/Degreaser is a concentrated cleaner, degreaser and stain remover that quickly and easily removes tough stains from many different surfaces. Water-based, it contains no petroleum solvents, bleach or ammonia. It cleans what ordinary cleaners simply can't and is particularly good as a tile and grout cleaner.
Remmers BFA is a highly effective, liquid restoration solution with a bactericide, fungicide and algacide effect. BAuA Reg. No.: N-48396. Remmers BFA is a restoration solution for removing algae, fungi, lichen and moss on mineral building materials and other water resistant surfaces as well as for preventive treatment to create an “active...
Remmers Oil & Grease Remover is used for manually cleaning synthetic resin flooring, ceramic surfaces and all other alkali resistant substrates when grease or other coarse soiling must be removed, e.g. in large-scale kitchens, hotels, industrial operations, printing operations, vehicle parks, etc. Because it is strongly alkaline, it is...
HW/C Cleaner & Degreaser is a cleaning liquid to gently remove grease, wax, cigarette stains, etc., before applying Envirograf® Fire Protection. Can be diluted with 20% water (if required). Part of the HW system of fire protection paints by Envirograf. Available in sizes between 1 & 5 litres.
Remmers Clean SL (formerly Traffic Film Remover) is a highly effective solution of surface-active agents used for the removal of grime, crusts of dirt, dust and deposits of oil and grease on mineral substrates such as render, masonry work, concrete & natural stone. Remmers CLean SL is a highly effect solution of surface active agents....
Remmers Arte Mundit Eco is a self-vulcanising single component cleaning paste for the removal of dirt and dust on interior and exterior walls. For dry and thorough removal of dust, soot, films of dirt and other soiling on walls, ceilings, floors, stucco, natural stone, concrete, brick, render, marble and akoustolith tiles and all other water...
SS2 Sterilising Solution is a specially prepared, ready to use wash for use before painting to protect against mould or algae with the Hydron Nu-Cryl System. Advantages Kills spores of mould and algae. Prevents the growth of new spores for up to 3 years. Ready to use product. 8-10m² per Litre coverage.
A biologically degradable liquid surface cleaner without any hazardous substances. It is approved as a HOCNF Class Yellow product, and can be disposed to drains/sewage systems without containment. Top Features Removes rust, chalk, magnetite, salt, algae and other deposits. Well-suited for internal treatment of pipes and piping systems....
SS1 Sterilising Solution is a specially prepared, ready to use wash for use before painting to protect surfaces against mould or fungi before appyling the Hydron Nu-Cryl System. Advantages Protects against mould or fungi Supplied in 5 & 25 litres Colourless solution 12-month shelf life
The AG3 Graffiti Remover is an ideal graffiti remover for non-porous substrates such as gloss paint, tile, glass and metalwork. Advantages Ideal for non-porous surfaces Available in 10x 500ml sprays or 5L drum 12-month shelf life
Removes all types of soiling, pollution and stains from plastic, metal (including aluminium) and painted surfaces, renovating new life into the surface. Advantages Restores the surface back to the original colour. Easy to apply and ready to use. Economical application.