Rust-Oleum Mathys AMW Fungicidal Wash

Manufacturer:

Rust-Oleum Mathys AMW is a ready mixed fungicidal wash; a solution of an approved biocide in water (HSE Approval No 4246). Rust-Oleum Mathys AMW should be used as a masonry surface fungicidal wash for professional use against mould, fungi, moss, etc. Also suitable for treatment of similarly affected roof surfaces.

Bulk Buy

£22.57 tax excl.

Product Description

Rust-Oleum Mathys AMW is a ready mixed fungicidal wash; a solution of an approved biocide in water (HSE Approval No 4246). Rust-Oleum Mathys AMW should be used as a masonry surface fungicidal wash for professional use against mould, fungi, moss, etc. Also suitable for treatment of similarly affected roof surfaces.

Features & Benefits

  • Effective algae, fungi and dirt remover
  • Cleans polluted roofs and surfaces effectively
  • Not hazardous for applicator
  • Does not harm glass or PVC
  • For bitumen, concrete, asphalt, wood and pre-painted substrates

Surface Preparation
All mould, fungi, lichens etc. should be given a saturated coat of AMW before their complete removal (to kill spores). Remove debris by power washing or use of a stiff brush. The whole area should then be given a second coat of AMW and allowed to dry (to render the substrate sterile).

Directions for Use
Apply Rust-Oleum AMW abundantly, preferably by brush, and wait 12 hours. Dry-brush and remove dust prior to painting, or clean with high-pressure water and let the surface dry. Affected by heavy rainfall for at least 4 hours after application. If doubtful re-apply. Ensure residues are substantially diluted with water before entering drains etc.

Applications
Tools: Brush or “coarse” spray such as a pneumatic garden spray. Do not dilute.

It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.

Technical Data

Typical Coverage (per coat)5m² per litre
Touch Dry12 Hours
ApplicationBrush, Spray
The figures stated above are approximate. Please ensure you refer to all datasheets for full application information.

Download

Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.

Questions



Be the first to ask a question about this product!

Question about the product

* Required fields
Send

The question has been correctly sent

Free delivery

On orders over
£75.00 + VAT

Low trade prices

Our best trade prices on everything!

Technical Advice

Fast FREE Technical Advice for Products & Projects

Click & collect

Order and collect from
our Leeds based trade store.