Call 0113 245 5450 for Sales or Technical
Alternatively you can email our sales & support team on [email protected]
International Interplus 614 is a single component, water based rust remover gel, specifically designed to remove tightly adhering light to medium rust deposits from metallic substrates prior to repainting with approved maintenance coatings.
International Interplus 614 is a single component, water based rust remover gel, which can be described as readily biodegradable as tested by OECD 301B CO2 Evolution test.
Intended Uses
Please contact Rawlins Paints' Technical Support Team on 0113 2455450 for more information.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Cromadex 678 Spirit Wipe is formulated to remove all traces of oil and grease from metal surfaces prior to painting. Recommended for manual cleaning where vapour degreasing is not suitable, product is supplied ready for use.
Teamac Mordant Solution (T Wash), is a pre-treatment for new galvanised steel to ensure adhesion of subsequent coatings. Satisfactory treatment will be shown by a colour change to dark grey throughout the whole surface. Advantages Application: Brush, Dip, Roller Coverage: 40 Square Metres Per Litre Suitable For: Galvanised Metal...
HMG Mordant T Wash is designed for use as an etching solution for galvanised steel & zintec. Manufactured to a formulation originally developed by the British Rail Board Click to jump down to Technical Data
HMG Prep Clean 2803 is a slow evaporating, low odour and mild preparatory cleaning solvent for the degreasing of substrates. Used in many applications. For use on bare surfaces only. Click to jump down to Technical Data
For use with all access covers, emergency concrete repairs, bedding and profiling of kerbs and tidal repair projects. Rapid strength gain Conforms to HD27/15 Excellent workable consistency Open to traffic: 45 minutes Shrinkage compensated Approved for use on the London Underground and Overground
Removes all types of soiling, pollution and stains from plastic, metal (including aluminium) and painted surfaces, renovating new life into the surface. Advantages Restores the surface back to the original colour. Easy to apply and ready to use. Economical application.
HMG Prep Clean 2802 is a fast evaporating, strong Preparatory Cleaning solvent for the heavy duty degreasing of substrates. Used in many applications. For use on bare surfaces only. Click to jump down to Technical Data
International Interplus 546 is a single component solvent based cleaner/degreaser, which is specifically designed to remove surface contamination such as oil, grease, dirt and soot from metallic and coated substrates as part of a maintenance program.
A biologically degradable liquid surface cleaner without any hazardous substances. It is approved as a HOCNF Class Yellow product, and can be disposed to drains/sewage systems without containment. Top Features Removes rust, chalk, magnetite, salt, algae and other deposits. Well-suited for internal treatment of pipes and piping systems....
Bradite Pre-Treat Galvanised Steel is a mordent solution used as a pre-treatment for galvanised steel, to provide a key for all paint primers and finishes. Easy to use solution; clean up with water after use. Advantages British gas reference BGC MO1. Department of Transport Item NO:155. ISO 9001:2008 ISO 140001:2004
M90 is ideal for bedding access covers and general repairs. This general purpose mortar conforms to HD27/04, and a rapid strength gain and can be opened to traffic in 90 minutes. Workability: 5 – 10 minutes Set time: 20 minutes Depth: 10mm – 75mm 21N/mm² compressive strength in 2 hours Approved for use on the London Underground and...
PPG Prep 88 (also known as Duraprep) is a waterborne alkaline cleaner that is ideal for cleaning soiled and chalked surfaces. Free from solvents, phosphates, halogens and petroleum distillates. Top Features Biodegrable Dramatically improves aged overcoatability Freezing point: 25°F (-4°C) Boiling Point: 212°F (100°C)
International Interplus 634 is specifically designed to remove tightly adhering coating residues from metallic substrates prior to repainting with approved maintenance coatings. Coating residues include conventional epoxies, polyurethanes, alkyds, acrylics and water borne coatings.
Tor T-Wash Mordant Solution, a pre-treatment wash for galvanised steel that ensures adhesion for a wider range of subsequent coatings. The product changes colour (from grey to black) for a visual aid and proof that the entire surface has been treated satisfactorily. Good coverage - up to 20 square metres per litre Pre-treatment only -...
Sherwin-Williams Degreaser W500, formerly known as Envirogard W500, is a water based degreasing agent based on a blend of plant derived surfactants free from caustic alkalis, silicates, harmful solvents, phosphates or aggressive biocides. Degreaser W500 is suitable for removal of dirt, oil and grease from all ferrous and non-ferrous metallic...
International Interprime 160 is a phosphoric acid based mordant solution for treating galvanised steel. International Interprime 160 is for the chemical pretreatment of galvanised steel prior to the application of protective coating systems, in order to ensure good adhesion where blasting or abrasion is not possible.
