- On sale!
Rust-Oleum CombiColor Wrought Iron - Last One Left
A Wrought Iron effect maintenance paint by Rust-Oleum for metal with superior metal protection from their CombiColor product range. This CombiColor paint topcoat and primer in one, and can be applied direct to rust. It will provide excellent rust protection to metal, wood and steel surfaces.
Last one left in this sale, don't miss out!
- 1x 750ml Wrought Iron Green Matt
Rust-Oleum CombiColor Wrought Iron can be applied directly on bare, manually derusted or with CombiPrimer Anti-Corrosion 3369/3380 primed steel. Rust-Oleum CombiColor Wrought Iron produces a matt, wrought iron effect finish and is available in a brush/roller or aerosol version. Rust-Oleum CombiColor Wrought Iron should be used in light industrial exposures, normal humidity and interior applications.
Features & Benefits
- Primer and topcoat in one
- For application onto rust, bare metal and wood
- Wrought iron finish - high hiding power
- Usable down to 5°C
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
- Brush, Roller, Spray
- Touch Dry
- 2 hours (brush) / 2 hours (aerosol)
Be the first to ask a question about this product!
Limited stock left in this sale, don't miss out! 3x 2.5L Clear Gloss Coo-Var Glocote Protective Coat is a clear glaze which can be used to protect the exterior performance and prolong the colour retention of Coo-Var Glocote Fluorescent Paint ADVANTAGES Prolongs colour retention Protects from weathering Increases the all-round...
Rust-Oleum Mathys Pegakote is a two-pack, water based, epoxy coating for interior floor and wall surfaces in garages, warehouses, showrooms, corridors, indoor car parks, workshops, etc. It is exceptionally abrasion resistant, very low odour, easy to clean leaving a smooth, stain finish and resistant to oils and solvents.
Available from Rust-Oleum at Rawlins Paints, this is a pasty, water-based hydrophobic substance specially developed to make mineral surfaces and mostly non-porous concrete durably water-repellent.
Sika 1 Screed Mortar is part of the Sika 1 Structural Waterproofing System and is the third layer of the floor screed system. Supplied in pre-batched blue banded bags for easy identification and use. When mixed with Sika 1 Waterproofer Liquid Admixture it produces part of a complete structural waterproofing system for floors.
Jotun Thinner No. 10 is a paint thinner designed to improve the flow of a range of Jotun polyurethane products. It can also be used as a cleaner of pumps and tools after and before painting. Jotun Thinner No. 10 is specially suitable as a thinner for polyurethane and similar products.
Stimsonite 980 Road Studs are surface mounted road studs that are injection moulded from durable polymers to endure high traffic volumes. The patented sure grip base provides excellent adhesion to the road surface and the patented prismatic glass lens provides high, long-term levels of enhanced reflectivity.
Coo-Var Hammercote Smooth Aerosol is a fast drying coating which gives a hard, durable, smooth finish direct to metal objects in a handy 400ml aerosol. ADVANTAGES Very fast drying Full hardness after several days Apply direct to metal or primer Durable Gloss finish Rust resistant Heat resistant up to 150°C Interior/Exterior use
Blackfriar Exterior Wood Preservative Gold Star is a deep penetrating wood preservative based on powerful fungicide and insecticide. ADVANTAGES Protects against wood destroying fungi, Dry rot, insect attack Water repellent Lower odour NEW Interior/Exterior use NEW Can be spray applied NEW Better colour stability NEW Coverage rate...