• On sale!
Bradite One Can
  • Bradite One Can
  • Bradite One Can
  • Bradite One Can

CLEARANCE - Bradite One Can

OC64

Bradite One Can is a quick-drying primer/finish coat in one can, with excellent adhesion, stain blocking and anti-corrosive properties. Suitable for use over most properly cleaned and prepared commercial wood, uPVC, glass, plastic and metals. Manufactured under the auspices of an ISO 9001:2008 & ISO 14001:2004.

Advantages

  • Available in more than 350 colours in RAL & BS
  • Anti-corrosive on all metals
  • Dries in 30 minutes and recoatable within an hour
  • Blocks and locks stains
  • Low odour and water-thinned

5 x 1l Black available - now 50% off

3 x 1l White available - now 50% off

4 x 2.5l Black available - now 50% off

5 x 2.5l White available - now 50% off

Colour
Size
Finish
£19.95
£9.99 Save £11.95
VAT excluded

£11.99 Tax incl.
Quantity

Description

Bradite One Can is a quick-drying, low odour, water thinned primer/finish coat, with excellent adhesion, stain blocking and anti-corrosive properties. Compatibility with existing coatings should be confirmed by preparing and painting a test patch. Bare steel and non-ferrous metals should be properly prepared before painting with this product.

Please refer to the datasheet for surface and substrate preparation and use on:

  • Suitably prepared metals - ferrous and non-ferrous
  • Wood
  • Plastic
  • uPVC
  • Ceramic tiles
  • Glass
  • Existing painted surfaces

Available in stunning RAL shades as well as black and white, Bradite One Can makes for a seriously impressive and immensely useful colourful paint coating of choice for many applications.

Although the anti-corrosive properties will appeal to those looking to paint metals, the use of this paint on wood and plastic should not go unnoticed:

  • Furniture
  • Sculptures
  • Storage bins and racks
  • Doors
  • Shelving and shelving units

Perfect for both interior and exterior use, Bradite One Can is the new go-to for primer and top coat... in one can.

Manufactured under the auspices of an ISO 9001:2008 quality & ISO 14001:2004 environmental management systems. 2004/42/EC EU limit value for this product (Annex IIA/i: wb): 140g/l (2010). This product contains max 30 g/l VOC.


Features & Benefits

  • Available in more than 350 colours in RAL & BS
  • All-purpose primer and topcoat in one can
  • Dries in 30 minutes and recoatable within an hour
  • Anti-corrosive on all metals.
  • Interior and exterior use with excellent durability.
  • Blocks and locks stains.


Preparation

Loose and non adhered contamination should be removed. Cleaning using Bradite TD39 Industrial degreaser is recommended to remove oils, grease and other contamination, rinse with clean water and allow to dry.

Intact areas of existing coatings should, ideally, be roughened by manual or mechanical sanding. Feather back exposed areas to a sound coating edge. Cracks and pits should be filled using a suitable filler before painting. Substrate should be dust free and completely dry before coating.

Aluminium, stainless steel, galvanised steel, copper and other metals: cleaned and degreased, and lightly abraded if possible. White salts on weathered galvanising must be removed during cleaning and degreasing. Light surface rusting can be treated with Bradite Rust Convertor RC46. Heavy rusting to be removed to clean metallic finish (SIS-St 3).

New Wood: Ensure moisture content of the timber is below 15% before commencing application. Damp wood should never be painted as this may give rise to blistering, flaking, cracking and premature coating failure.

Green oak should not be painted unless it has been weathered for at least 6 months.

Existing paint finish: Remove all loose and flaking paintwork. Degrease using Bradite TD39 Industrial Degreaser, followed by clean water rinse. Rub down thoroughly with a medium grade sand paper to provide a key and a defect free smooth surface, “feathering in” areas where paint has been removed.

Plastics: For long term performance, clean & lightly sand down surfaces.

New plaster walls: For plaster skim, allow at least four weeks for the plaster to thoroughly dry. Apply a primer coat by thinning the paint with a 5 to 25% (v/v) addition of clean water, depending upon the porosity of the substrate. Cut in by brushing at the same dilution recommendation as for priming, to promote flow and sealing of the substrate. For new, fully plastered walls, allow at least six months for the plaster to thoroughly dry before painting. This product is not recommended for painting lime or other natural plasters.

Existing plaster walls: Lightly wash any existing paint work to remove any dust or surface laitance. Apply a primer coat by thinning with a 0 to 25% (v/v) addition of clean water, depending upon the porosity of the substrate.

This product is not recommended for painting previously painted lime or other natural plasters.

For high gloss/low slip substrates that can’t be roughened e.g. Ceramic Tiles then Prime the substrate with 1 coat of One Can OC64 White Base before applying the required colour.

Painting System

1st coat: Bradite ONE CAN OC64.

2nd coat: Bradite ONE CAN OC64.

3rd coat: Bradite ONE CAN OC64 (If required).


Application

All surfaces must be dry and dust free before coating. Application should always conform with the codes of practice described in BS 6150 and BS 5493.

Brush and Roller: Supplied ready for use. Thin with 0-5% Water if required.

Conventional Air Spraying: Thin with 5-15% water as required. Tip size - 2.0mm. Tip pressure - 60psi (0.4MPa) approximately.

Airless Spraying: Thin with 0-10% water as required. Tip size - 19 thou (0.48mm) approximately Tip pressure - 2100 psi (15MPa) approximately.

Equipment should be cleaned immediately after use with water.

It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.

Product Details
OC64

Data sheet

Application
Brush, Roller, Spray
Coverage
11m2 per Litre
Touch Dry
30 Mins
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


Be the first to ask a question about this product!


Question about the product

* Required fields
(read)
Send