

We no longer stock this product, but can recommend Jotun Steelmaster 600WF as our nearest alternative. Please contact our Technical Team on 0113 2455450 (option 2) or send a message to [email protected] prior to purchase/use for advice on suitability.
Jotun Steelmaster 60WB is specially designed as passive fire protection for steel constructions. Suitable for structural steel to be exposed to a wide range of corrosive environments up to high as a part of a complete system.
Additional certificates and approvals may be available on request.
Steelmaster 60WB is applied using airless spray, roller and brush for touch up only. For the full guidance notes download the Steelmaster product application guide.
Please note: Grey in this product is now made to order - minimum quantities and lead times may apply.
IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions and should be applied only by an individual with the necessary expertise and experience. We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
![]() | Question: Hi, Once the steel is painted with your fire resistant paint, can you paint over it with normal paint ie dulux or crown paints. Regards |
Answer from Rawlins’ Technical Team: No, only an approved Jotun topcoat should be used. Approved topcoats for Jotun Steelmaster 60WB currently include Jotun Conseal Touch-Up, Jotun Pioner Topcoat, Jotun Hardtop AX, Jotun Hardtop XPL, Jotun Hardtop HB and Jotun Futura Classic. You must check with our Technical Department before proceeding as Jotun do continually update their recommendations/approved topcoats.
| |
![]() | Question: Hi, Once the steel is painted with your fire resistant paint, can you paint over it with normal paint ie dulux or crown paints. Regards |
Answer from Rawlins’ Technical Team:
No by brush only. If spray application is required use the aerosol version instead. | |
![]() | Question: How many years protection will it give in a indoor enviroment |
Answer from Rawlins’ Technical Team: Jotun Steelmaster 60WB itself does not offer any corrosion protection. However, when used with the correct primer/topcoat combination you can achieve up to 15 years expected service life from the system as outlined in ISO 12944-2. For an internal C3 environment, a suitable primer and Steelmaster 60WB alone should give the required protection. If Steelmaster 60WB is to be left exposed and not clad or boarded in, a suitable topcoat should be used to finish the system to prolong the service life and achieve the 15 year + durability. | |
![]() | Question: is it best to erect the steelwork (primed) then spray the fireproof paint after.? |
Answer from Rawlins’ Technical Team: Yes it is. Ensure the building is at a stage where the steels are protected from the elements, dry and internal before applying Jotun Steelmaster 60WB Jotun Pilot QD Primer is a compatible primer and often used under Steelmaster 60WB on bare, prepared mild steel sections. Jotun Pioner Topcoat is often used as a compatible finish if required. | |
![]() | Question: Will Jotun Steelmaster 60WB be ok to use on ducting for fire protection? |
Answer from Rawlins’ Technical Team: No, Jotun Steelmaster 60WB is for structural steel members in a building. Duct work is normally thin galvanised metal sheet rolled up to form the ducting tubes and is too thin to protect with an intumescent paint of this kind. | |
Jotun Steelmaster 60WB is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT