

We no longer stock this product, but can recommend Axalta ViterClad 50 Finish as a great alternative.
A high build polyurethane topcoat, specifically formulated to offer optimum performance for the protection and redecoration of architectural metal cladding. Provides a tough, durable finish combining abrasion resistance with outstanding colour and sheen retention giving longer life expectancies while being able to cure at sub zero temperatures and tolerate slight surface moisture during application.
Recommended for the maintenance of Corus Colorcoat HP200 and HPS200 cladding. It’s also suitable for PVF2, Silicone Polyester and Polyester Cladding as well as bare galvanised and aluminium surfaces when applied over 903 Cladding Primer.
• Up to 15yrs protection
• Tough, durable and weather resistant
• Cures at sub zero temperatures
• Tolerant of slight surface moisture during application
• Available in a wide range of colours including metallic shade RAL 9006 White Aluminium
![]() | Question:
Could we have a small pot of BS411 and BS412 to test paint a panel and decide on colour for the cladding on the units. SEND TO: F.A.O. Graham Beer Unit 3B Beaver industrial Estate Midhurst Road Liphook GU30 7EU |
Answer:
Unfortunately we do not offer samples of this product but we do sell British Standard Colour Fans which include the two colours you have requested for £50.00 + VAT. Alternatively you could purchase a product like Zinsser AllCoat Exterior or Rust-Oleum CombiColor in a 1lt size of each colour to apply to your cladding to test the colours. | |
• These colour samples are to be used for guidance only.
• Product contained within is generic to provide a close representation to your chosen colour.
• Should not be used to carry out any painting project, this is for colour selection purposes only and does not remove the need for you to ensure the correct product is chosen and tested for your application once a colour has been decided on.
• It is not a sample of the product you intend to purchase/use and cannot be used to test anything other than colour appearance.
• Notwithstanding any other provision of our conditions of sale, you agree and understand that many factors affect the colour of a painted product, including lighting, sheen level, method of application, batches variances number of coats and substrate surface.
• We cannot therefore promise that the colour of the product you ultimately purchase will exactly match the colour of this colour sample.
• Once you have selected a colour, you must purchase the smallest amount of the product you intend to use in your chosen colour and apply to a small, inconspicuous test area to be sure that it meets your expectations.
• Leave the product for 24 hours and then only buy more paint and/or apply more paint if you are completely happy with the results on the test area.
• We cannot be liable to you for any loss or damage if you have not complied with this process.
• Notwithstanding any other provision of our conditions of sale, you agree and understand that many factors affect the colour of a painted product, including lighting, sheen level, method of application and product surface.
• We cannot therefore promise that the colour of the product you paint with the Kolorbond paint will exactly match the colour of the item you send to us.
• You must therefore purchase the smallest Kolorbond paint pot available first and then apply the paint to a small, and where possible hidden, test area of your product to be sure that it meets your expectations.
• Leave the product for 24 hours and then only buy more paint and/or apply more paint to your product if you are completely happy with the results on the test area.
• We cannot be liable to you for any loss or damage if you have not complied with this process.