1301 Clear Graffiti Coating
  • 1301 Clear Graffiti Coating

1301 Clear Graffiti Coating

We no longer stock this product, but can recommend Hydron Nu-Guard AG as a great alternative.

Product not available
This Product has been Discontinued


We no longer stock this product, but can recommend Hydron Nu-Guard AG as a great alternative.

A quick-drying, single pack clear anti-graffiti coating from Rawlins Paints offering permanent protection on a wide range of substrates against graffiti of all kinds and can be cleaned repeatedly with just soapy water.

Short drying and re-coating times mean rapid protection against graffiti can be achieved whilst continuing to retain the appearance and aesthetics of the original surface. On top of that, this coating has also been designed to resist water and mildew. 


• Excellent water and mildew resistance.
• Permanent protection - up to 20yrs life expectancy.
• Protects surfaces against graffiti and poster attacks.
• Clear finish to keep the appearance of previously painted or bare substrates.

Product Details

Data sheet

Brush, Roller, Spray
Touch Dry
2 hours
Rawlins Paints

questions Kyriacos on 2018-10-24 06:08:36

What can I use against graffiti on aluminium surface?


You can apply Hydron Nu-Guard AG directly to prepared aluminium.

questions Mark Lavis  on 2018-09-24 08:21:42

Hi there Is there a product that protects against graffiti for pebble dash walls ?


Yes, Hydron Nu-Guard AG would be our suggestion. Apply 2 - 3 coats with a long pile roller.

questions b T decorating  on 2018-02-27 15:46:01

what temperature can it be applied


The weather and the substrate should be dry, with air temperature at least 5°C (max 30°C) with a surface temperature 3°C above Dew Point and relative humidity below 90%. Drying and recoating times will be extended in cold, damp conditions.

questions Zenon on 2017-10-03 14:19:14

can"1301 clear graffiti coating msds" be used on tiled walls?


No, but Nu-Guard AG Adhesion Promoter followed by Nu-Guard AG can be used on glazed tiles and other dense surfaces.

questions Peter Morrill on 2017-09-05 20:08:34

What is the best product to protect a noticeboard with a perspex window?


We would recommend Nu-Guard AG Adhesion Promoter followed by Nu-Guard AG. Ensure a test area is carried out first to ensure adhesion, performance, appearance, compatibility, etc.

questions Mhairi on 2016-12-07 19:54:03
Question: Can this be used on pvc door and pebble dash wall thanks

1303 Clear Adhesion Primer would need to be used on uPVC before application of 1301 Clear Graffiti Coating, but a test would need to be carried out first to ensure adhesion and compatibility. Pebble dash walls can be coated directly with 1301 Clear Graffiti Coating if they are just stone.


Question about the product

* Required fields