We no longer stock this product, but can recommend Hydron Nu-Guard AG as a great alternative.
A quick-drying, single pack clear anti-graffiti coating from Rawlins Paints offering permanent protection on a wide range of substrates against graffiti of all kinds and can be cleaned repeatedly with just soapy water.
Short drying and re-coating times mean rapid protection against graffiti can be achieved whilst continuing to retain the appearance and aesthetics of the original surface. On top of that, this coating has also been designed to resist water and mildew.
• Excellent water and mildew resistance.
• Permanent protection - up to 20yrs life expectancy.
• Protects surfaces against graffiti and poster attacks.
• Clear finish to keep the appearance of previously painted or bare substrates.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
|The figures stated above are approximate. Please ensure you refer to all datasheets for full application information.|
|Kyriacos on 24/10/2018|
What can I use against graffiti on aluminium surface?
You can apply Hydron Nu-Guard AG directly to prepared aluminium.
|Mark Lavis on 24/09/2018|
Hi there Is there a product that protects against graffiti for pebble dash walls ?
Yes, Hydron Nu-Guard AG would be our suggestion. Apply 2 - 3 coats with a long pile roller.
|b T decorating on 27/02/2018|
what temperature can it be applied
The weather and the substrate should be dry, with air temperature at least 5°C (max 30°C) with a surface temperature 3°C above Dew Point and relative humidity below 90%. Drying and recoating times will be extended in cold, damp conditions.
|Zenon on 03/10/2017|
can"1301 clear graffiti coating msds" be used on tiled walls?
|Peter Morrill on 05/09/2017|
What is the best product to protect a noticeboard with a perspex window?
|Mhairi on 07/12/2016|
Question: Can this be used on pvc door and pebble dash wall thanks
1303 Clear Adhesion Primer would need to be used on uPVC before application of 1301 Clear Graffiti Coating, but a test would need to be carried out first to ensure adhesion and compatibility. Pebble dash walls can be coated directly with 1301 Clear Graffiti Coating if they are just stone.
Colour reproduction of the Products on the Site is limited by the technology used to deliver web pages and by the colour representation of Customer’s own monitor and computer set-up. We have made every effort to display as accurately as possible the colours of our Products but we cannot guarantee that the colour shown on Customer’s monitor’s display will accurately reflect the colour of the Product on delivery. We recommend that Customer first purchases the smallest Product available or access an industry standard colour chart in person (and not digitally) to ensure that the colour is acceptable for its purposes. For more information, please see our Terms & Conditions of Sale.Close