We no longer stock this product, but can recommend AG3 Graffiti Remover as a great alternative.
Graffiti Magic Multi Surface Graffiti Remover is a truly remarkable graffiti remover, incorporating breakthrough technology to give effective removal on both porous & non-porous substrates as well as from many previously painted surfaces.
Graffiti Magic Multi-Surface Graffiti Remover incorporates the latest technology to allow it to work on a multitude of uncoated surfaces - such as Brick, stone, concrete & render as well as hard surfaces such as those found in rail carriages, shop fronts and bus shelters. It will even remove graffiti from many types of painted surfaces.
- One safer Graffiti Remover replaces a range of products.
- Use inside and out on many different surfaces, including Anti-Graffiti coatings.
- 100% biodegradable formulation.
- Contains no chlorinated solvents.
- Gelled for use on vertical surfaces.
- Easily washes off with water.
- Fast acting with slow evaporation means it stays wet to works longer.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
|dave h on 29/01/2018|
How to get marker pen graffiti off upvc
Some Plastics are not compatible with even the gentlest of cleaners, so it is essential to carry out a ‘small discrete trial application’ prior to any use on these materials to see if removal can be carried out successfully & without any long term damage to, or change in, surface appearance.
It is entirely the responsibility of the user to determine both the initial suitability and then the appropriate dwell times for Graffiti Magic Multi Surface Graffiti Remover for their particular use.
On Plastics or Coated Surfaces
Test for ‘dwell’ time (the amount of time the remover takes to work). Apply the product to a small area of graffiti. Using a clean cloth check a part of this area every few minutes. When the graffiti is loose and lifting clean off the surface this is your ‘dwell time’. Wipe off completely and rinse well with clean water. Check to ensure no surface damage has occurred. If sucessful, apply Graffiti Magic Multi Surface Graffiti Remover liberally over the area to be cleaned using a brush and allow to dwell for the pre-determined time before removal. For small areas remove with a clean cloth turning the cloth repeatedly to ‘lift’ the Graffiti away then rinse thoroughly. For larger areas wash down with clean water using an appropriate brush or sponge.
Refer to the product data sheets TDS (Technical Data Sheet) and MSDS (Material Safety Data Sheet) available to download above for more information.
|Jim Mcfarlane on 18/01/2018|
Question: Do you have any product that will remove paint from a recently render surface.
To remove graffiti from un-coated, porous surfaces we recommend Graffiti Magic Bare Surface Graffiti Remover.
|Campbell syme on 07/02/2017|
Question: Looking for a graffiti remover that works on sandstone
Graffiti Magic Bare Surface Graffiti Remover will remove graffiti from sandstone.
|nigel kay on 11/01/2017|
Question: what coverage of area can you expect for a 20 litre bottle?
A 20lt should remove graffiti from approximately 30-40m² of surface area dependant upon the surface texture, porosity and level of graffiti attack.
|clare evans on 10/10/2016|
Question: can you provide some guidance on roughly what area a 5l bottle of graffiti magic will cover. thanks
5 litres of Graffiti Magic Multi Surface Graffiti Remover will clean approximately 10m².
|Martin on 11/08/2015|
Looking for a good graffiti remover that will remove marker pen from sandstone, tried various aerosols that have been no good.
For stubborn graffiti on bare surfaces we recommend our 1402 Pro Coating Remover. We've had great success with the product on similar projects and it evens removes any shadowing that can sometimes be left on particularly porous surfaces.
Colour reproduction of the Products on the Site is limited by the technology used to deliver web pages and by the colour representation of Customer’s own monitor and computer set-up. We have made every effort to display as accurately as possible the colours of our Products but we cannot guarantee that the colour shown on Customer’s monitor’s display will accurately reflect the colour of the Product on delivery. We recommend that Customer first purchases the smallest Product available or access an industry standard colour chart in person (and not digitally) to ensure that the colour is acceptable for its purposes. For more information, please see our Terms & Conditions of Sale.Close