Mathys Plastopan Super N

88.1.1

We no longer stock this product.

Quantity

Description

We no longer stock this product; please contact our technical team on 0113 2455450 (option 2) or send a message to [email protected] where we will be happy to find an alternative product.

Mathys Plastopan Super N

Mathys Plastopan Super N is a solvent-based synthetic filler based on linseed oil alkyd resin for smoothing out uneven areas on indoor and outdoor woodwork that have to be recoated with oil based or synthetic based paints.

Features & Benefits

  • Quick hardening
  • Excellent filling
  • Contains no water soluble substances
  • Absorbs very little of the applied paint.

Technical Data

  • Density: ± 2,4
  • Gloss Level: Matt
  • Solids content in volume: ± 70 %
  • Solids Content in weight: ± 87 %

Drying Times At 20°C/RH 50%

  • Touch dry: 1 hour
  • Dry to recoat: 24 hours
  • Fully cured: 1 week

Theoretical Consumption

1 - 5 kg/m²

Practical Consumption

Depends on several factors such as porosity and roughness of the substrate and material losses during application (see DIN 53220).

Surface Preparation

Clean the substrate thoroughly, remove old weather-stained paint that is adhering poorly. Apply a thin layer of Fassiprim (diluted with ± 10% volume white spirit) on surfaces before filling them. First treat substrates that are powdering or chalking with Fixonal. After filling and sanding, apply a primer coat of Fassiprim on all the surfaces; if matt finished portions are still visible after the primer dries, re-apply the primer to obtain a uniform appearance.

Directions For Use

Apply in a dry and well-ventilated environment.

Application Conditions

  • Apply in a dry and well ventilated environment.
  • White spirit

Remarks

Apply thin layers of Plastopan Super N.

It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.

Product Details
88.1.1

Data sheet

Manufacturer
Rust-Oleum
Base Type
Solvent base
Suitable Substrates
Wood
Touch Dry (at 20°C)
1 hour
Dry to Recoat (at 20°C)
24 hours
Fully Cured (at 20°C)
1 week
VOC
390 g/l
Recommended Dry Film Thickness
± 1,4 mm
Recommended Wet Film Thickness
± 2 mm
UN Number
Not regulated
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


Be the first to ask a question about this product!


Question about the product

* Required fields
(read)
Send