Rust-Oleum Non-Skid Additive NS 200
    • Rust-Oleum Non-Skid Additive NS 200

    Rust-Oleum Non-Skid Additive NS 200 1kg

    200.1
    RUS1303

    Rust-Oleum Non-Skid Additive NS 200 is a specially selected non-skid additive that can be mixed with the required Rust-Oleum coating system or sprinkled into the freshly applied coating to produce a non-skid surface.

    • Durable aluminium oxide anti-slip additive
    • Resists vehicular traffic
    • Choice of 3 different granule sizes
    • Can be pre-mixed or broadcasted over wet paint
    • For any 2K paint

    Size
    £6.60(ex. VAT)
    £7.92 (inc. VAT)
    Quantity
    Please choose your colour
    Available for Delivery (See Delivery Options Below)

    Description

    Rust-Oleum Non-Skid Additive NS 200 is based on thermally split flint stones and is intended to be added to floor coatings to produce a non-skid surface. Rust-Oleum Non-Skid Additive NS 200 can be used in combination with the following Rust-Oleum Floor coatings:

    Technical Data

    • Density: 2,3
    • Solids content in volume: 100 %
    • Solids Content in weight: 100 %

    Theoretical Consumption

    • NS200/300: Sparingly: 20 m²/kg (= 200 g/l if mixed in), Dense: 10 m²/kg (= 400 g/l if
      mixed in)
    • NS500: Sparingly: 5 m²/kg, Dense: 2 m²/kg

    Rust-Oleum Non-Skid Additives can be mixed with the required Rust-Oleum coating system or can be sprinkled into the freshly applied coating manually or with special low pressure spraying equipment. Rust-Oleum Non-Skid Additives are intended for Non-Skid industrial flooring and should be topcoated with the required Rust-Oleum System if sprinkled.

    Directions for Use

    Sprinkling: Sprinkle the granulates onto the freshly applied, wet Rust-Oleum coating, manually with a "sprinkler-box" for small areas, or with special low-pressure spraying equipment with a nozzle opening of at least 18mm; air pressure between 1 - 3 bars.

    Mixing: Mix the granulates into the wet coating material and apply the coating with a roller or a brush (not by spraying), stir regularly to avoid settling of the granulates.

    Note: For coating systems with a dry film thickness less than 300μm it is recommended to use NS 200.

    Coverage:

    • Sparingly: 20 m²/kg (= 200 g/l if mixed in)
    • Dense: 10 m²/kg (= 400 g/l if mixed in)
    Product Details
    1303-994194

    Data sheet

    Manufacturer
    Rust-Oleum
    For Use By
    Professional Use
    Application Method
    Brush
    Roller
    Pack Size
    15KG
    Density
    2.3g/cm³
    Solids by Volume
    100 %
    Shelf Life (from date of manufacture)
    5 years
    Usages
    Anti-Slip
    Product Usage Type
    Additive
    Attachments
    Download


    Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


    Be the first to ask a question about this product!


    Question about the product

    * Required fields
    (read)
    Send

    IMPORTANT SHIPPING & DELIVERY INFORMATION

    Rust-Oleum Non-Skid Additive NS 200 1kg is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

    Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

    Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

    All delivery costs below are excluding VAT


    You might also like

    Rust-Oleum 9700 Coldmax Rapid (Standard)

    We no longer stock this product, but can recommend Watco Cold Set Coating as a great alternative. Please note: it is important to check that any alternative product is suitable for your requirements, as our suggestion is given in good faith but without warranty. If you are in any doubt please first contact our technical team on 0113 2455450...

    In stock

    Rust-Oleum 5800 Epoxy Rapid WB

    Rust-Oleum 5800 Epoxy Rapid WB is a fast curing epoxy floor paint for inside use. For garages, warehouses, showrooms, corridors, indoor car parks, workshops etc.For Professional use Overcoatable after just 3 hours Water-based, so no odour and safe to use Excellent flow Nice smooth finish, easy to clean Ample application time (4 hours)...

    Price £107.45 (ex. VAT)
    In Stock and Available for Delivery

    Rust-Oleum 5500 Solvent Free Epoxy

    Rust-Oleum 5500 Solvent Free Epoxy is a high build, solvent-free epoxy floor paint for garages, warehouses, showrooms, corridors, indoor car parks, workshops etc. Optimal protection in only one or two layers.For Professional use High build coating (150 microns), very durable Suitable for frequent (chemical) cleaning Excellent resistance...

    Price £170.17 (ex. VAT)
    In Stock and Available for Delivery

    Rust-Oleum 9100 Winter Grade Epoxy

    We no longer stock this product; please contact our technical team on 0113 2455450 (option 2) or send a message to [email protected] where we will be happy to find an alternative product.

    In stock

    Rust-Oleum Mathys Pegakote

    Rust-Oleum Mathys Pegakote is an easy to apply, two-pack, water based, epoxy coating for interior floor and wall surfaces in garages, warehouses, showrooms, corridors, indoor car parks, workshops, etc. Available in 4,400+ colours, inc. RAL, RAL Design, BS, NCS & the new NCS 2050 colours New Sizes - Now Available in 5L and 10L Pack...

    Price £123.00 (ex. VAT)
    In Stock and Available for Delivery

    Rust-Oleum 9100 High Performance Epoxy

    We no longer stock this product, but can recommend Rust-Oleum 9100 High Solids Epoxy or Rust-Oleum 9100 Winter Grade Epoxy as a great alternatives.

    In stock

    Rust-Oleum 9600 Rust-O-Thane Polyurethane

    We no longer stock this product, but can recommend Jotun Hardtop XP as a great alternative. Please note: it is important to check that any alternative product is suitable for your requirements, as our suggestion is given in good faith but without warranty. If you are in any doubt please first contact our technical team on 0113 2455450 (option...

    In stock

    Rust-Oleum 9100 High Solids Epoxy

    Rust-Oleum 9100 High Solids Epoxy is a higher solids, better coverage and lower VOC content product than the standard 9100 Epoxy. Two-pack, glossy epoxy coating for metal, walls and floors. The most efficient epoxy system providing a very hard coating with high layer thickness for lasting results even with a single coat application....

    Price £113.18 (ex. VAT)
    In Stock and Available for Delivery