- There are no more items in your cart
- Shipping Calculated at checkout
- Sub-Total (ex. VAT) £0.00
Rust-Oleum X1 Cutting & Tapping Spray
We no longer stock this product; please contact our technical team on 0113 2455450 (option 2) or send a message to [email protected] where we will be happy to find an alternative product. See our Technical Sprays page for more paints and coatings.
Rust-Oleum X1 Cutting & Tapping Spray
Rust-Oleum X1 Cutting & Tapping Spray is a specially formulated cutting fluid which lubricates and cools the cutting tools and work piece for every form of metalworking such as cutting, drilling, sawing and tapping. It withstands extreme loads and temperatures, will resist chemical attacks and has excellent thermal conductivity. An ultra-thin film will give lasting lubrication and protection.
Features & Benefits
- Reduced friction leads to better surface finish
- Increases process speeds
- Non silicone
- Contains extreme pressure additives which help prevent galling and pitting
- Cools while cutting
- Prolongs tool life
Recommended Uses
Cutting, drilling, sawing and tapping all types of ferrous and non ferrous metals
Technical Data
Heat Resistance: -30°C to 130°C
Surface Preparation
Ensure electrical equipment is isolated and check surfaces for compatibility prior to application. Clean and remove old lubricant from components prior to application.
Application Conditions
Apply at temperatures between 5° and 35°C. Shake aerosol before use. Spray a light film onto surface from 20 to 30 cm. Do not over apply.
Data sheet
- Manufacturer
- Rust-Oleum
- For Use On
- Ferrous Metals, Non-Ferrous Metals
- Application Method
- Spray
- Single, Two or Three Pack
- Single
- Pack Size
- 500ml
- Max. Application Temperature
- 35°C
- Min. Application Temperature
- 5°C
- Heat Resistance (up-to)
- -30 °C to 130°C
- Shelf Life (from date of manufacture)
- 3 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5° and 35°C.
- UN Number
- UN 1950
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Rust-Oleum X1 Cutting & Tapping Spray is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT