We no longer stock this product; please contact our technical team on 0113 2455450 (option 2) or send a message to [email protected] where we will be happy to find an alternative product.
Timberex Active Stain is a range of water-based grey stains that penetrate deep into the wood for a lasting grey ‘weathered wood’ look. Only apply once, then topcoat can be applied.
Features & Benefits
- Trendy grey shades for oak wood
- High coverage up to 8-12 m²/L
- Water-based and non-corrosive
- Easy application, no special tools needed
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
- 8-12m² per litre
- Touch Dry
- 12 hours
|Norman Biddlecombe on 2017-11-11 19:18:07|| |
Question: Would the Driftwood be suitable for staining Birch Plywood for an internal ceiling and then protected with an oil or oil/wax finish such as Osmo or Fiddes ? Although you recommend application by roller I take it there is no problem with using a sponge and brush as I will need to protect the walls while working on the ceiling. Thanks
On the basis that the plywood will be porous and allow the oil to penetrate, then yes, Timberex Active Satin could be used. Application by brush instead of roller is acceptable but we have no experience of the product being applied by sponge.
Timberex Enviro should be used as a finishing oil and not Osmo or Fiddes.