- There are no more items in your cart
- Shipping Calculated at checkout
- Sub-Total (ex. VAT) £0.00
Sika 1 Finishing Mortar
We no longer stock this product, but can recommend Sika 1 Pre-Bagged Finishing Mortar as a great alternative.
Please note: it is important to check that any alternative product is suitable for your requirements, as our suggestion is given in good faith but without warranty. If you are in any doubt please first contact our technical team on 0113 2455450 (option 2) or send a message to [email protected] where we will be happy to discuss your project.
Sika 1 Finishing Mortar is part of the Sika 1 Structural Waterproofing System and is the third layer of the wall render system.
- Supplied in pre-batched green banded bags for easy identification and use
- When mixed with Sika 1 Waterproofer Liquid Admixture it produces part of a complete structural waterproofing system for walls
Sika 1 Finishing Mortar is part of the Sika 1 Structural Waterproofing System and is the third layer of the wall render system. Supplied in pre-batched green banded bags for easy identification and use. When mixed with Sika 1 Waterproofer Liquid Admixture it produces part of a complete structural waterproofing system for walls, contains no impurities and can be applied internally and externally for brick, concrete and stone substrates.
Sika 1 Finishing Mortar is pre-batched kiln dried blends of specially graded aggregates and cements packaged in the appropriate mix ratios for optimum application performance and durability. When mixed with the diluted Sika 1 Waterproofer Liquid Admixture it provides part of the multi-coat system for structural waterproofing render systems.
Uses
- Internal waterproofing of below ground structures to meet the requirements of BS8102 – 2009 Grades 1 - 3
- Waterproofing of swimming pools and other water retaining structures
- Waterproofing of basements, cellars and vaults
- Waterproofing of tunnels
Features and Benefits
- 90 years track record
- Type A waterproofing system according to BS8102- 2009
- Proven resistance to hydrostatic back pressure
- Fully bonded waterproofing barrier
- Can be applied to wet substrates
- For use on concrete, brick and structural blockwork
- Can be used internal and externally
- Quality controlled system
- Used for negative or positive water pressure situations
For more details please download the product data sheet from the 'DATASHEETS' tab above.
Data sheet
- Manufacturer
- Sika
- Interior / Exterior Use
- Internal and External
- For Use On
- Concrete, Brickwork
- Application Method
- Trowel
- Colour
- Standard / Ready Mixed
- Single, Two or Three Pack
- Single
- Pack Size
- 25KG
- Coverage
- 2m² @ 6mm per 25kg
Barry martin on 2020-11-20 18:44:29 | Question: When you apply the sila 1 finishing coat how long does it take to finish this product in hours |
Answer from Rawlins’ Technical Team: Sika 1 Pre-bagged Waterproofing render systems must be kept moist during the work period and for a minimum 7 day period after final application to stop drying out and reduce cracking. They should be prevented from being exposed to sudden changes in air temperature and relative humidity. | |
Alu on 2020-02-12 13:57:14 | Question: Hi do you do this in any smaller quantity I o ly have a 1ft sq patch to repair. Also what length use by date is usual for this product Thanks |
Answer from Rawlins’ Technical Team: This is available in 25kg bags only. | |
IMPORTANT SHIPPING & DELIVERY INFORMATION
Sika 1 Finishing Mortar is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT