Mathys Pegafix is a colourless impregnating primer for porous, mineral substrates such as concrete, breeze block, bricks, etc. before painting them with waterborne paints. High fixing capacity Superior penetration characteristics Water based More Information
We no longer stock this product, but can recommend Rust-Oleum Mathys Murfill Quartz as a great alternative.
Rust-Oleum Mathys Paracem Quartz is a high quality, textured acrylic wall paint for outside and inside use.
- Cement Rendering
- Plaster Boards
- Wooden Panels
- Density: ± 1,65
- Solids content in volume: 55 - 59 %
- Solids Content in weight: 73 - 75 %
Drying Times At 20°C/RH 50%
- Touch dry: 1 hour
- Dry to recoat: 8 hours
- Fully cured: 1 day
500 g/m² on even flat substrates. Minimum 1 kg/m² on structured substrates such as concrete cell blocks.
Practical coverage depends on many factors such as porosity and roughness of the substrate and material losses during application.
Cell concrete blocks: prime with Martin Mathys Pegafix or Primer 44HS. Walls in poor condition:remove all old coatings or bad plasterwork. Sand/treat the wall with a wire brush to remove all loose particles. Repair all damaged parts with a cement mortar or Martin Mathys Pegacrete. Small repairs can be treated with a mix of Paracem Quartz filled with dry sharp sand. All repairs should be primed with Martin Mathys Pegafix. Fill up holesand seal joints or fissures with Martin Mathys Elastofill. New walls/masonry: if possible wait 1 year before treatment. The substrate must be sufficiently dry and stable and no bleeding of nitric acid should be visible. Brush dry and dust, then apply a coat of Martin Mathys Pegafix or Primer 44 HS.
- Brush, Roller, Spray
- Dry to Recoat (at 20°C)
- 8 Hours
- Fully Cured (at 20°C)
- 1 Day
- 500 g/m² on even flat substrates. Minimum 1 kg/m² on structured substrates such as concrete cell blocks
- Solids by Volume
- 55 - 59 %
- 30 g/l
- Shelf Life (from date of manufacture)
- 2 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5° and 35°C
- Touch Dry
- 1 Hour
- Recommended Dry Film Thickness
- 175 µm
- Recommended Wet Film Thickness
- 300 µm
- UN Number
- Not regulated
|David on 2018-10-19 20:43:22|| |
Is this suitable for outside mobile homes coatings
Rust-Oleum Mathys Paracem Quartz is intended for masonry wall surfaces, if the exterior of your mobile home is bare or previously painted masonry then Rust-Oleum Mathys Paracem Quartz would be suitable. If you have a different substrate please contact our Technical Team on 0113 2455450 or [email protected] so we can offer an alternative product.
|david tout on 2016-07-18 11:17:43|| |
Question: is this paint ok to use on lime render
Rust-Oleum Mathys Primer 44 HS has a large fixation capacity for stabilising loose particles and improving the adherence of subsequent topcoats. Unsaponifiable Good UV resistance Excellent fixation on roofs Very flexible Chlorinated rubber technology, solvent-based Quickly water-resistant (1 hour after application at 20°C)...
Rust-Oleum Mathys Elastofill is an elastic jointing paste based on acrylic dispersions for filling up cracks, crevices or fissures with periodically varying width, that forms a rubber-like mass with permanently high elasticity (>900%) after evaporation of the water. Used for for sealing, jointing, filling fixing and gluing Can absorb...