Please note: it is important to check that any alternative product is suitable for your requirements, as our suggestion is given in good faith but without warranty. If you are in any doubt please first contact our technical team on 0113 2455450 (option 2) or send a message to [email protected] where we will be happy to discuss your project.
Mathys Fassilux Satin is a first quality satin gloss alkyd enamel, for interior and exterior woodwork, to be used as a topcoat on wood and all pretreated not alkaline substrates.
Simple and fast application
Excellent flow
Excellent scratch and wear resistance
Good outdoor durability, weatherproof
Quick drying
Good coverage
Even gloss finish
Good edge coverage
High gain
Can be tinted in virtually any colour
Product customisation
Don't forget to save your customization to be able to add to cart
Mathys Fassilux Satin is a first quality satin gloss alkyd enamel, for interior and exterior work. To be used as a topcoat for interior and exterior woodwork, applicable on wood and all pretreated not alkaline substrates.
Features & Benefits
Simple and fast application
Excellent flow
Excellent scratch and wear resistance
Good outdoor durability, weatherproof
Quick drying
Good coverage
Even gloss finish
Good edge coverage
High gain
Can be tinted in virtually any colour
Technical Data
Density: 1,34 - 1,37
Gloss Level: Satin
Gloss level at 60º: +/- 30%
Solids content in volume: 53 - 56 % (weiss)
Solids Content in weight: 70 - 73% (wit)
Drying Times At 20°C/RH 50%
Touch dry: 4 - 5 hours
Dry to handle: 5 - 6 hours
Dry to recoat: 24 hours
Fully cured: ± 1 week
Theoretical Consumption
18 m²/l
Practical Consumption
Practical coverage depends on many factors such as porosity and roughness of the substrate and material losses during application.
Surface Prepartation
Priming coat: Fassiprim. For top quality painting work, apply two coats of Fassiprim, sanding between each coat carefully. For exterior works, it is advisable to apply an impregnating coat of Adex on bare or stripped wood.
Application Conditions
Apply in a dry and well-ventilated area. Minimum temperature: 10°C. Maximum relative humidity: 80%
Remarks
Do not use Fassilux Satin on Noxyde for outside works. In these cases, use either Fassilux or Pegacryl Satin.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Hi, Can Mathys Fassilux satin be thinned, I think I may have read somewhere that it can't.
Answer from Rawlins’ Technical Team:
It is not recommended to thin this paint.
Norma burns on 2016-11-23 19:05:12
Question: Would this paint require an undercoat over previous painted wood,if not would 2 top coats be sufficient?,one last question does this paint come in dark brown,thanks I await your advice.
Answer from Rawlins’ Technical Team:
Over existing, compatible painted surfaces after preparation (cleaning and light sanding to provide a key) you can apply 2-3 coats as required of Mathys Fassilux Satin directly to the prepared, dry surfaces.
Bare timber should be first primed with 2 coats of Mathys Fassiprim. On exterior works, treat bare timber with Mathys Adex before priming.
Mathys Fassilux Satin is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
We no longer stock this product; please contact our technical team on 0113 2455450 (option 2) or send a message to [email protected] where we will be happy to find an alternative product. Rust-Oleum Thinner 22 is for the dilution of synthetic enamels and varnishes for airless application. Degreasing of metals and most wood types....
General Painting Application Kit from Rawlins Paints provides the basics for any painting project. Whether it is a one off job, or you just want to make sure the right application tools get to site.Provides an economical way of making sure you will have what you need Ideal for interior and exterior paint projects Click to jump down to...