GacoFlex SF2036 WalkPad
  • GacoFlex SF2036 WalkPad
  • GacoFlex SF2036 WalkPad
  • GacoFlex SF2036 WalkPad
  • GacoFlex SF2036 WalkPad

GacoFlex SF2036 WalkPad


We no longer stock this product; please contact our technical team on 0113 2455450 (option 2) or send a message to [email protected] where we will be happy to find an alternative product.

GacoFlex SF2036 WalkPad is a stay-put solution for creating highly-visible rooftop walkways. It is an exceptionally durable, silicone-based, solvent-free coating that is combined with a reinforcing agent to provide exceptional durability and resistance to traffic and tears.

Product not available
This Product has been Discontinued


GacoFlex SF2036 WalkPad is a silicone-based, solvent-free, single-component waterproof elastomeric moisture-curing sealant combined with a reinforcing agent and is specifically formulated for exceptional durability.

GacoFlex SF2036 WalkPad is intended for application over GacoFlex Silicone Coatings and a variety of other roofing substrates to create a rooftop walkway for pedestrian maintenance traffic. Unlike conventional mats, WalkPad becomes an integral part of the roof. The yellow colour provides a highly visible and aesthetic rooftop walkway, and when combined with GacoFlex WalkPad Granules will offer traction and resistance to wear under light foot traffic.

Adhesion is excellent when applied directly over GacoFlex Silicone Coatings. A primer may be required for adhesion to other surfaces including built-up roofing, modified bitumen capsheet, single ply roofing (EPDM, TPO, PVC and Hypalon®), masonry, concrete, and wood. A primer must be used on all ferrous metals to prevent corrosion. Contact the Technical Department for specific recommendations.

No primer is needed when WalkPad is being applied directly over GacoFlex Silicone Coatings. If applying WalkPad to any other surface, apply GacoFlex E5320 2-Part Epoxy Primer/Filler according to label directions.

Apply by brush or trowel as received. Apply WalkPad at a rate of 4 gallons per 100 sq. ft.

When using WalkPad to create a rooftop walkway for pedestrian maintenance traffic, it is recommended that GacoFlex WalkPad Granules be applied to the wet product at a rate of 0.5 lb. per 100 sq.ft. to help ensure good traction. CAUTION: While the use of granules will improve traction, caution should still be exercised when walking on WalkPad, especially in wet conditions.

NOTE: Application rate is job-specific. Additional material may be required due to surface profile, losses due to overspray and wind, and residual coating left in the container.

Allow to dry a minimum of 4 hours at 55°F (13°C) or higher, or until it can be safely walked on (product is moisture cure, low humidity will result in longer dry times).

Please contact Rawlins Paints' Technical Support Team on 0113 2455450 for more information.

Product Details

Data sheet

0.6m² per litre
Touch Dry
4 Hours

Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.

Be the first to ask a question about this product!

Question about the product

* Required fields


GacoFlex SF2036 WalkPad is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

All delivery costs below are excluding VAT