

Jotun SeaForce 30 is the optimal choice if you are looking for a very good antifouling at a cost effective level. With a predictable and effective performance, Jotun SeaForce 30 limits the hull deterioration caused by fouling throughout the whole sailing interval. This is achieved through a controlled and predictable polishing rate, combined with an effective mix of biocides.
Jotun SeaForce 30 is a one component acrylic, hydrolysing antifouling coating based on ion exchange technology. It provides good fouling protection which is achieved through self polishing characteristics reducing hull deterioration. It should be used as a finish coat in immersed environments only and is suitable on approved primers and tie coats on aluminium and carbon steel substrates. It can be applied at sub zero surface temperatures.
Features & Benefits
Approvals and certificates
Additional certificates and approvals may be available on request.
Typical use
Marine:
Recommended for under water hull in newbuilding and dry docking. Designed for vessels trading at a wide range of speed and high activity. Jotun SeaForce 30 can be used for long service periods up to 60 months as a part of a complete coating system.
Protective:
Can be used for offshore constructions and outside hull for static installations in deep sea.
Typical trade
Suited for vessels operating in global service, including fresh water exposure during newbuilding outfitting. Recommended for deep sea trade.
Disclaimer
Jotun antifouling products are intended for professional use only and have been specially formulated with increased levels of copper oxide as well as strong biocides for use on vessels and structures operating for long periods in testing conditions where extended service intervals are required.
The Health & Safety Executive (HSE) deem them 'For professional use only'. This means we can only sell Jotun antifouling products to customers who confirm at the point of ordering that they will be applied in accordance with the appropriate HSE regulations.
‘Professional users are those who use such products in the course of their work. Under COPR they must have received adequate instruction and guidance in using the pesticide and be competent in its use, in order to protect human beings, other creatures and plants, safeguard the environment and avoid pollution of water. As a minimum pest controllers should be aware of pesticide legislation and use, and how to carry out risk assessment under the Control of Substance Hazardous to Health Regulations (COSHH). However there is no requirement for users of non-agricultural pesticides to have gained a 'certificate of competence'. Users should follow the relevant instructions on the use of any approved pesticide, including instructions on safe disposal.'
Customers interested in buying Jotun antifouling products should contact us on 0113 2455450 or [email protected] as these products cannot be ordered online.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
![]() | Question: I would like to enquire your selling price for the below product 5 Ltr. Jotun SeaForce 30 Reference: 0TV099FVA 0TV099WVA I look forward to hearing from you. Yours Sincerely Markus Schneider |
Answer: £83.75 + VAT per 5lt - Should you wish to place an order please contact our sales team on 0113 2455450 but first please ensure you have read and understood the professional use disclaimer in the product description. | |
• These colour samples are to be used for guidance only.
• Product contained within is generic to provide a close representation to your chosen colour.
• Should not be used to carry out any painting project, this is for colour selection purposes only and does not remove the need for you to ensure the correct product is chosen and tested for your application once a colour has been decided on.
• It is not a sample of the product you intend to purchase/use and cannot be used to test anything other than colour appearance.
• Notwithstanding any other provision of our conditions of sale, you agree and understand that many factors affect the colour of a painted product, including lighting, sheen level, method of application, batches variances number of coats and substrate surface.
• We cannot therefore promise that the colour of the product you ultimately purchase will exactly match the colour of this colour sample.
• Once you have selected a colour, you must purchase the smallest amount of the product you intend to use in your chosen colour and apply to a small, inconspicuous test area to be sure that it meets your expectations.
• Leave the product for 24 hours and then only buy more paint and/or apply more paint if you are completely happy with the results on the test area.
• We cannot be liable to you for any loss or damage if you have not complied with this process.
• Notwithstanding any other provision of our conditions of sale, you agree and understand that many factors affect the colour of a painted product, including lighting, sheen level, method of application and product surface.
• We cannot therefore promise that the colour of the product you paint with the Kolorbond paint will exactly match the colour of the item you send to us.
• You must therefore purchase the smallest Kolorbond paint pot available first and then apply the paint to a small, and where possible hidden, test area of your product to be sure that it meets your expectations.
• Leave the product for 24 hours and then only buy more paint and/or apply more paint to your product if you are completely happy with the results on the test area.
• We cannot be liable to you for any loss or damage if you have not complied with this process.