Rust-Oleum FK111 Cleaning Solution

111.5

We no longer stock this product; please contact our technical team on 0113 2455450 (option 2) or send a message to [email protected] where we will be happy to find an alternative product.

Rust-Oleum FK111 Cleaning Solution is a concentrated, alkaline, non-flammable, virtually odour free cleaning and degreasing solution for vertical substrates like walls.

  • High-viscosity formulation is ideal for use on walls, does not run off the wall
  • Removes grease, oil, proteins, dirt and many other contaminants
  • Usable as additive for high pressure cleaning
  • Neutralizes acids and acidic salts
  • Non-flammable, virtually odour-free
  • Ready-use mixture - for pollution it can also be diluted with water

Quantity
Product not available
This Product has been Discontinued

Description
Concentrated, alkaline, non-flammable, virtually odour free cleaning and degreasing solution for vertical substrates like walls.
  • High-viscosity formulation is ideal for use on walls, does not run off the wall
  • Removes grease, oil, proteins , dirt and many other contaminants
  • Usable as additive for high pressure cleaning
  • Neutralizes acids and acidic salts
  • Non-flammable, virtually odour-free
  • Ready-use mixture - for pollution it can also be diluted with water

Apply FK111 liberally and scrub it into the surface. Allow to stand for 10-15 minutes, depending on temperature, and clean thoroughly by flushing with plenty of fresh water. After cleaning, remove any remaining water and allow the surface to dry, as moisture left on the surface or entrapped into pores may cause premature failure of the coating system.

Technical Data

  • Density: 1,04

Practical Consumption

Practical usage depends on many factors such as type and amount of contaminants, shape of the substrate and material losses during application.

Directions For Use

To ensure homogeneity shake well before use. Scrape or sweep away grease, oil, dirt, mould and all other surface contaminations as much as possible. Scrub FK111 into the surface using a stiff (nylon) bristle brush. Allow to stand for 5 to 10 minutes and clean thoroughly by flushing with plenty of fresh water. FK111 should normally be applied as delivered. However, it can be diluted with fresh water up to 1 : 2 parts, when applied on surfaces which are slightly contaminated. Can also be used as an additive for (highpressure) steam cleaning, in concentrations from 5% up to 25% for severely contaminated surfaces, followed by (steam) cleaning or rinsing with fresh water. After cleaning, remove any remaining water and allow to dry completely, as moisture left on the surface or entrapped into pores may cause failure of the coating system. Do not allow to dry before rinsing! Large surface areas or poor drying conditions may require longer drying times before a coating system can be applied.

Safety Data

  • pH: 11
  • VOC level: 0 g/l
  • Flashpoint: Not flammable
  • Remarks regarding safety: Consult Safety Data Sheet and Safety Information printed on the can.
Please contact Rawlins Paints' Technical Support Team on 0113 2455450 for more information.
Product Details
111.5

Data sheet

For Use By
General Use
For Use By
Industrial Use
For Use By
Professional Use
Interior / Exterior Use
Interior & Exterior
Water / Solvent Based
Water
Single, Two or Three Pack
Single
Application
Brush
Coverage
6-8m² per litre
Max. Application Temperature
35°C
Min. Application Temperature
5°C
Density
1,04
VOC
0 g/l
Shelf Life (from date of manufacture)
5 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5° and 35°C.
Colour(s)
Clear
Usages
Walls
Product Type
Cleaner
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


Be the first to ask a question about this product!


Question about the product

* Required fields
(read)
Send