We no longer stock this product; please contact our technical team on 0113 2455450 (option 2) or send a message to [email protected] where we will be happy to find an alternative product.
Rust-Oleum 7201 Universal Floor Primer is ready for use solvent based adhesion primer based on a special epoxyester binder. Improves the adhesion of floor paints on mineral substrates. 1 component, easy to apply it can be recoated with all Rust-Oleum or Mathys floor paints.
Rust-Oleum 7201 Universal Floor Primer is ready for use solvent based adhesion primer based on a special epoxyester binder. Improves the adhesion of floor paints on mineral substrates.
Features & Benefits
Easy to apply
Excellent adhesion on non-porous and dense mineral substrates
Can be recoated with all Rust-Oleum or Mathys floor paints
1 component product
Prevents, when used on fresh mineral substrates, the saponification of alkyd based top coats.
Adhesion and impregnation primer for mineral substrates.
Technical Data
Density: 1.12 kg/l
Gloss Level: Matt
Solids content in volume: 46%
Solids Content in weight: 63.1%
Drying Times At 20°C/RH 50%
Touch dry: 4 h
Dry to handle: 8 h
Dry to recoat: 16 h
Fully cured: 3 days
Theoretical Consumption
13 m²/l
Practical Consumption
Practical coverage depends on many factors such as porosity and roughness of the substrate and material losses during application
Preparation
New concrete should cure and dry for at least 30 days prior to the application of Rust-Oleum 7201 Universal Floor Primer. Remove oil, grease and all other surface contaminations by alkaline or high pressure (steam) cleaning in combination with appropriate detergents. Remove all laitance, loose or unsound concrete by vacuum-blasting or etching with Rust-Oleum Mathys 108 Surfa Etch Solution. Remove concrete curing compounds completely. Large surfaces should preferably be prepared by abrasive blasting (vacuum blasting) or flame cleaning. Profile maximum 0.5mm. Defects in the concrete should be repaired with Rust-Oleum 5180 Epoxy Repair Mortar or Rust-Oleum Mathys Pegacrete. Small (hair) cracks and air-pockets should be repaired with Rust-Oleum 5412 Epoxy Filler. The surface should be clean and dry during application.
Temperature of air and substrate between 5 and 35°C and relative humidity below 85%. The substrate temperature must be at least 3°C above dew point.
Please contact Rawlins Paints' Technical Support Team on 0113 2455450 for more information.
Product Details
7201.5
Data sheet
For Use By
Industrial Use
For Use By
Professional Use
Interior / Exterior Use
Interior & Exterior
Water / Solvent Based
Solvent
Water / Solvent Based
Solvent
For Use On
Mineral Substrates
Application Method
Brush, Roller
Colour
Clear
Single, Two or Three Pack
Single Pack
Single, Two or Three Pack
Single
Pack Size
5L
Application
Brush, Roller
Dry to Handle (at 20°C)
8 Hours
Dry to Recoat (at 20°C)
16 Hours
Fully Cured (at 20°C)
3 Days
Coverage
13m² per litre
Recommended Thinner/Cleaner
RUST-OLEUM Thinner 160
Max. Application Temperature
35°C
Min. Application Temperature
5°C
Density
1.12 kg/l
Solids by Volume
46 %
VOC
412 g/l
Shelf Life (from date of manufacture)
5 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5° and 35°C
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Rust-Oleum 7201 Universal Floor Primer is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
Rust-Oleum Thinner 160 is a specially formulated blend of solvents designed to mix with Rust-Oleum`s 1085 Galva Zinc, 9100 High Performance Epoxy and B95 Flexible Epoxy to create an optimal consistency for application whether it be for Brush, Roller or Spray. Can also be used for the cleaning of some surfaces or equipment.
Strong dilution...
Rust-Oleum Mathys 108 Surfa Etch Solution is an easy to use, non-flammable and virtually odour free etching solution for the preparation of smooth concrete surfaces, masonry, galvanized steel and aluminum before applying a paint coating system.
Improves the adhesion of coating systems
Neutralizes alkaline salts
Also ideal to remove "white...
Rust-Oleum 5180 Epoxy Repair Mortar is an incredibly tough, 2 component epoxy resin mortar for repairing damaged, dished or dangerous concrete and stone floors.
Virtually indestructable
Heavy traffic friendly
Chemical resistant
Does not shrink or crack
Easy all-in-one packaging
Interior/Exterior use
No primer required in most...
We no longer stock this product, but can recommend Watco Concrex Fine Filler as a great alternative.
Please note: it is important to check that any alternative product is suitable for your requirements, as our suggestion is given in good faith but without warranty. If you are in any doubt please first contact our technical team on 0113...
Floor Application Kit from Rawlins Paints provides all the application equipment needed to apply conventional floor paints and coatings to a professional standard. The application of floor coatings is often crucial to their performance, so it is important to use the right tools to ensure a lasting finish.
Each kit contains:
12" Roller,...